Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Creating a Healthier and Safer Environment & BRACKETS FIXINGSTGCO 24 60 Chain Actuator TGCO 24 60 Applications Natural Ventilation Natural SmokeVentilation Ventilation Features: Slim linear design combined with high pressing forces specifically for actuation of tophung windows and skylights for smoke and natural ventilation. • Automatic switch off when end stop is reached • Overload protection • Opening mechanics with stainless steel chain, maintenance-free • Corrosion-free external elements • Configurable as single or tandem chain motor • Optional combinable with a locking catch, adjustable via DIP-Switches on the electronics. • Groove on the back of the chain motor as “installation zone”: - None of the consoles and connections are directly visible, thus causing less visual disturbance. - The consoles can be variably positioned within the mounting groove. Allows for utilisation of maximum possible casement width. - The connecting cable can be inserted “invisibly” on the back of the chain motor. The end caps are then no longer required and can be dismounted at any time for servicing purposes. Tel: +44 (0)1543 44 30 60 www.secontrols.com Version 2.1 Fax: +44 (0)1543 44 30 70 TGCO 24 60 Technical Drawing For dimensions see table below Stroke Dimension 400mm Stroke 40 x 57 x 666mm 600mm Stroke 40 x 57 x 766mm 800mm Stroke 40 x 57 x 866mm The AutoCAD drawing for this product can be found at www.secontrols.com Technical Data Connections Smoke Or Natural Ventilation Both ACTUATOR TYPE Chain VOLTAGE (all +/-6%) -20 % / +25 % of nominal voltage DIMENSIONS As above IP RATING IP 32 INSULATION CLASS Class III AMIBIENT TEMPERATURE -10 °C to +60 °C PRODUCT LIFE > 10.000 ventilation cycles at nominal load STANDARD COLOUR white (RAL 9016) or silver grey (RAL 9006) FLEX 3 m included in delivery AMP DRAW CURRENT (with load) 1.5 amp* at 600 N full load PRESSING FORCE up to 600 mm stroke = 600 N*, up to 800 mm stroke = 200 N* TRACTIVE FORCE 600N STROKE 400, 600, 800 mm as standard OPERATING TIME 11.5 mm/sec at nominal rating * For tandem chain motor multiply the values by two PRODUCT TGCO 24 60 STROKE FORCE WHITE (RAL 9016) GREY (RAL 9006) 400mm 600N AAG0600400W AAG0600400S 600mm 600N AAG0600600W AAG0600600S 800mm 200N AAG0600800W AAG0600800S This actuator requires control from a compatible low voltage unit such as OS2. Recommended Control: Contact an SE Controls sales representative for recommendations. CE CERTIFIED Version 2.1 Compliant to applicable regulations. Tel: +44 (0)1543 44 30 60 www.secontrols.com Fax: +44 (0)1543 44 30 70