Download SPOTLIGHT DC 75-300 Power Supply for Arc Lamps

SPOTLIGHT DC 75-300
Power Supply for Arc Lamps
The DC 75-300 Lab Power
Supply is a current-regulated
D.C power supply designed to
operate with any short arc
mercury and xenon lamps
between 3 to 22A up to 30kV.
Tested on many of the lamps
available on the market, the
DC75-300 Lab Power Supply
has been especially designed
for optimum operation with
mercury, xenon and mercuryxenon light sources.
The “State of the Art” electronic
design provides efficient
operation free from electrical
noise (stability better than 1%).
The ignition high voltage is
provided by an electronical
ignitor, included in the lab
Power Suuply. This electronic
ignitor supplies a 30kV pulsed
high voltage which minimizes
electromagnetic disturbance so
harmful to electronical
instrumentation located nearby.
An auxiliary output, located on
the rear panel, provides a
24V/DC voltage especially
designed for connection with
fans or low consumption
accessories.
The DC75-300 lab Power
Supply has been designed to
operate from nominal 110/220V
50/60Hz main supply. For
operator convenience, the
110/220V switch is located on
the rear panel, included in the
main line socket.
The DC75-300 is delivered with
a LCD timer, located on the
front panel. This timer,
graduated in tenths or an hour,
provides important information
on lamp life time.
The electronical design of both
power supply and ignitor, makes
for a very compact unit. With
small dimensions and low
weight (approx. 3.8kg - 15.2lb),
the DC75-300 Arc Lamp Power
Supply is dedicated for
operation in laboratories.
APPLICATIONS
n Medical and Industrial Endoscopes,
n Photo Optic Lighting,
n Instrumentation,
n Fiber Optics Transmission,
n Solar Simulation,
n Fluorescence Microscopy,
n Spectroscopy.
EUROSEP
Instruments
SPOTLIGHT DC75-300 Power Supply for Arc Lamps
LAMP HOUSINGS
for xenon compact
for mercury or xenon arc lamps
EUROSEP Instruments
power supplies have been
designed and manufactured
according to product technical
specifications and strictly conform the
European Directives.
Technical Specifications
DC75-300
Operating Wattage
Main Input Voltage
Lamp Output
Auxiliary Output
Ignition Specifications
High Voltage
Ignitor Operation Voltage
Lamp Intensity
Current regulation
Ripple
Dimensions L*H*D (mm)
Weight (kg)
up to 300W
110/220V
from 4 to 22A/30V
24V DC/33Watts max
30KV
80V DC
Better than 1%
Less than 1%
250*120*283
3.8
Copyright @ EUROSEP Instruments -DC75300.A1
Specifications subject to change without notice. The mentioned marks are registred trade marks of their respective manufacturer.
EUROSEP Instruments
abcde
BP 38233 CERGY SAINT CHRISTOPHE
95801 CERGY PONTOISE - FRANCE
Tel : (33) 01.3422.9522 - Fax (33) 01.3422.9532
Email : [email protected] - Internet : //www.eurosep.com