Download Electricity - World of Teaching

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Lumped element model wikipedia , lookup

Ohm's law wikipedia , lookup

Index of electronics articles wikipedia , lookup

Nanogenerator wikipedia , lookup

Opto-isolator wikipedia , lookup

Transcript
Flow of electrons
from one place to
another.
Advantages of circuit diagrams
 Quicker to make
 Connections between
the components are
easier to see.
 Symbols are
standerised.
Digital sensors
 A digital sensor is an electronic or
electrochemical sensor, where data conversion and
data transmission are done digitally.
capacitors
Although the ability to store some electrical energy
is common, devices called capacitors are
purposely designed to store large amounts of
electrical energy.
Symbols used in circuit diagrams
Justify the flow of electrons in
conductor
 There are many materials that
allow charges to move easily.
They are calledconductors.
Conductors have the quality
of conductivity
Conductivity is a quality
related to the conductor. A
material that is a good
conductor gives very little
resistance to the flow of
charge. This flow of charge is
called an electric current. A
good conductor has high
conductivity.
Zig zag movement of electrons
Resistance
Resistors
A resistor is anything that electricity can not travel
through easily. When electricity is forced through a
resistor, often the energy in the electricity is changed
into another form of energy, such as light or heat. The
reason a light bulb glows is that electricity is forced
through tungsten, which is a resistor. The energy is
released as light and heat.
Variable resistor
buzzers
Fuses and circuit breakers.
 The fuse breaks the circuit if a fault in an appliance
causes too much current flow. This protects the wiring
and the appliance if something goes wrong. The fuse
contains a piece of wire that melts easily. If the current
going through the fuse is too great, the wire heats up
until it melts and breaks the circuit.