Survey
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
KSH340 KSH340 High Voltage Power Transistors D-PAK for Surface Mount Applications • Lead Formed for Surface Mount Applications (No Suffix) • Straight Lead (I-PAK, “- I” Suffix) D-PAK 1 1.Base I-PAK 1 2.Collector 3.Emitter NPN Epitaxial Silicon Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage Parameter Value 300 Units V VCEO Collector-Emitter Voltage VEBO Emitter-Base Voltage 300 3 V V IC Collector Current (DC) 0.5 A ICP Collector Current (Pulse) 0.75 A PC Collector Dissipation (TC=25°C) 15 W Collector Dissipation (Ta=25°C) 1.56 W TJ Junction Temperature 150 °C TSTG Storage Temperature - 65 ~ 150 °C Electrical Characteristics TC=25°C unless otherwise noted Symbol VCEO(sus) Parameter * Collector Emitter Sustaining Voltage Test Condition IC = 1mA, IB = 0 ICEO Collector Cut-off Current IEBO Emitter Cut-off Current hFE * DC Current Gain VCE = 10V, IC = 50mA Min. 300 Max. Units V VCB = 300V, IE =0 0.1 mA VEB = 3V, IC = 0 0.1 mA 30 240 * Pulse Test: PW≤300µs, Duty Cycle≤2% www.BDTIC.com/FAIRCHILD ©2002 Fairchild Semiconductor Corporation Rev. A4, October 2002 KSH340 VBE(sat), VCE(sat)[V], SATURATION VOLTAGE Typical Characteristics 1000 hFE, DC CURRENT GAIN VCE = 10V 100 10 1 1 10 100 1000 10 IC = 10 IB V BE(sat) 1 V CE(sat) 0.1 0.01 10 100 IC[A], COLLECTOR CURRENT 1000 IC[A], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 24 1000 ICP (max) PC[W], POWER DISSIPATION 10 s 50 0µ s 100 0µ 1m s DC IC[mA], COLLECTOR CURRENT 21 IC(max) 10 18 15 12 9 6 3 0 1 10 100 VCE[V], COLLECTOR-EMITTER VOLTAGE Figure 3. Safe Operating Area 1000 0 25 50 75 100 125 150 175 o TC[ C], CASE TEMPERATURE Figure 4. Power Derating www.BDTIC.com/FAIRCHILD ©2002 Fairchild Semiconductor Corporation Rev. A4, October 2002 KSH340 Package Dimensions D-PAK 0.50 ±0.10 MIN0.55 0.91 ±0.10 0.76 ±0.10 0.50 ±0.10 1.02 ±0.20 2.30TYP [2.30±0.20] (2XR0.25) (1.00) (3.05) 6.10 ±0.20 2.70 ±0.20 9.50 ±0.30 6.60 ±0.20 (5.34) (5.04) (1.50) (0.70) 2.30 ±0.20 (0.90) 6.10 ±0.20 2.30 ±0.10 (0.10) 2.30TYP [2.30±0.20] (0.50) 0.89 ±0.10 MAX0.96 (4.34) 2.70 ±0.20 0.80 ±0.20 0.60 ±0.20 (0.50) 9.50 ±0.30 5.34 ±0.30 0.70 ±0.20 6.60 ±0.20 0.76 ±0.10 Dimensions in Millimeters www.BDTIC.com/FAIRCHILD ©2002 Fairchild Semiconductor Corporation Rev. A4, October 2002 KSH340 Package Dimensions (Continued) I-PAK 2.30 ±0.20 6.60 ±0.20 5.34 ±0.20 2.30TYP [2.30±0.20] ±0.20 ±0.30 16.10 ±0.20 ±0.30 9.30 0.76 ±0.10 1.80 0.80 MAX0.96 0.50 ±0.10 6.10 ±0.20 (0.50) 0.70 (4.34) ±0.10 0.60 ±0.20 (0.50) 2.30TYP [2.30±0.20] 0.50 ±0.10 Dimensions in Millimeters www.BDTIC.com/FAIRCHILD ©2002 Fairchild Semiconductor Corporation Rev. A4, October 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. www.BDTIC.com/FAIRCHILD ©2002 Fairchild Semiconductor Corporation Rev. I1