Download HMHAA280 AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler HMHAA280 — A

HMHAA280
AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Features
Description
■ Compact 4-pin package (2.4mm maximum standoff
The HMHAA280 series consists of two gallium arsenide
infrared emitting diodes, connected in inverse parallel,
driving a single silicon phototransistor in a compact 4-pin
mini-flat package. The lead pitch is 1.27mm.
■
■
■
■
height)
Half pitch leads for optimum board space savings
Current Transfer Ratio: 50–600%
Available in tape and reel quantities of 2500
CSA (File #1201524), UL (File #E90700) and
VDE (File #136480) certified
Applications
■ AC line monitor
■ Unknown polarity DC sensor
■ Telephone line receiver
Package Dimensions
PIN 1
0.050 (1.27)
0.020 (0.51)
0.012 (0.30)
0.287 (7.29)
0.248 (6.30)
0.106 (2.69)
0.091 (2.31)
0.173 (4.40)
TYP
0.094 (2.39)
0.079 (2.01)
0.035 (0.89)
0.012 (0.30)
0.008 (0.20)
0.000 (0.0)
0.030 (0.75)
0.022 (0.55)
1
4 COLLECTOR
2
3 EMITTER
Equivalent Circuit
Note:
All dimensions are in inches (millimeters)
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
www.fairchildsemi.com
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
April 2011
Symbol
Parameter
Value
Units
TOTAL PACKAGE
TSTG
Storage Temperature
-55 to +125
°C
TOPR
Operating Temperature
-55 to +100
°C
EMITTER
IF (avg)
Continuous Forward Current
50
mA
IF (pk)
Peak Forward Current (1µs pulse, 300pps.)
1
A
VR
Reverse Input Voltage
6
V
PD
Power Dissipation
60
mW
0.6
mW/°C
Continuous Collector Current
50
mA
Power Dissipation
150
mW
1.5
mW/°C
Derate linearly (above 25°C)
DETECTOR
PD
Derate linearly (above 25°C)
VCEO
Collector-Emitter Voltage
80
V
VECO
Emitter-Collector Voltage
7
V
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
www.fairchildsemi.com
2
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
1.4
V
5
µA
INDIVIDUAL COMPONENT CHARACTERISTICS
Emitter
VF
Forward Voltage
IF = ±5mA
IR
Reverse Current
VR = 5V
BVCEO
Breakdown Voltage
Collector to Emitter
IC = 0.5mA, IF = 0
80
BVECO
Emitter to Collector
IE = 100µA, IF = 0
7
ICEO
Collector Dark Current
VCE = 80V, IF = 0
CCE
Capacitance
VCE = 0V, f = 1MHz
Detector
V
100
10
nA
pF
TRANSFER CHARACTERISTICS
CTR
DC Current Transfer Ratio
IF = ±5mA, VCE = 5V
50
600
CTR Symmetry
IF = ± 5mA, VCE = 5V
0.33
3.0
Saturation Voltage
IF = ± 8mA, IC = 2.4mA
tr
Rise Time (Non-Saturated)
IC = 2mA, VCE = 5V, RL = 100Ω
3
tf
Fall Time (Non-Saturated)
IC = 2mA, VCE = 5V, RL = 100Ω
3
VCE (SAT)
0.4
%
V
µs
ISOLATION CHARACTERISTICS
VISO
Steady State Isolation
Voltage
1 Minute
3750
VRMS
*All typicals at TA = 25°C
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
www.fairchildsemi.com
3
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Electrical Characteristics (TA = 25°C)
Fig. 1 Forward Current vs. Forward Voltage
Fig. 2 Collector Current vs. Forward Current
100
100
VCE = 10 V
IC - COLLECTOR CURRENT (mA)
IF - FORWARD CURRENT (mA)
TA = 25˚C
10
VCE = 5 V
10
VCE = 0.4 V
1
0.1
1
0.6
0.8
1.0
1.2
1.4
1
1.6
10
VF - FORWARD VOLTAGE (V)
Fig. 3 Current Transfer Ratio vs. Forward Current
Fig. 4 Normalized CTR vs. Temperature
2.0
1000
TA = 25˚C
NORMALIZED CTR (IF) / CTR (5mA)
IC /IF - CURRENT TRANSFER RATIO (%)
100
IF - FORWARD CURRENT (mA)
VCE = 10 V
VCE = 5 V
100
VCE = 0.4 V
Normalized to:
IF = 5 mA
VCE = 5 V
TA = 25˚C
1.5
IF = 5 mA
1.0
IF = 10 mA
IF = 1 mA
0.5
IF = 0.5mA
0.0
-0.5
10
1
10
-40
100
-20
IF - FORWARD CURRENT (mA)
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
Fig. 5 Collector Current vs. Temperature
100
IC - COLLECTOR CURRENT (mA)
VCE = 5 V
IF = 25 mA
10
IF = 10 mA
IF = 5 mA
IF = 1 mA
1
IF = 0.5 mA
0.1
-40
-20
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
www.fairchildsemi.com
4
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Typical Performance Characteristics
Fig. 6 Collector Current vs. Collector-Emitter Voltage
Fig. 7 Collector Current vs. Collector-Emitter Voltage
50
18
40
IC - COLLECTOR CURRENT (mA)
IC - COLLECTOR CURRENT (mA)
TA = 25˚C
IF = 50 mA
IF = 40 mA
IF = 30 mA
30
IF = 20 mA
IF = 10 mA
20
IF = 5.0 mA
10
16
IF = 50 mA
IF = 40 mA
14
IF = 30 mA
12
IF = 20 mA
10
8
IF = 10 mA
6
IF = 5 mA
4
IF = 2 mA
2
IF = 0.5 mA
IF = 1.0 mA
0
0
1
2
3
4
5
6
7
8
9
0
0.0
10
0.2
VCE - COLLECTOR-EMITTER VOLTAGE (V)
0.6
0.8
1.0
VCE - COLLECTOR-EMITTER VOLTAGE (V)
Fig. 8 Collector Dark Current vs. Temperature
Fig. 9 Switching Time vs. Load Resistance
1000
10
SWITCHING TIME (µs)
ICEO - COLLECTOR DARK CURRENT (µA)
0.4
IF = 1.0 mA
1
VCE = 48 V
VCE = 24 V
0.1
VCE = 10 V
0.01
TA = 25˚C
IF = 16 mA
VCC = 5 V
tOFF
100
tS
10
1
VCE = 5 V
tON
0.1
0.001
0
20
40
60
80
100
1
10
VCE(SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
TA - AMBIENT TEMPERATURE (˚C)
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
100
RL - LOAD RESISTANCE (KΩ)
Fig. 10 Collector-Emitter Saturation Voltage
vs. Temperature
0.30
IF = 5 mA
IC = 1 mA
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.14
0.12
0.10
-40
-20
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (˚C)
www.fairchildsemi.com
5
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Typical Performance Characteristics (Continued)
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Ordering Information
Option
Description
V
VDE Approved
R2
Tape and Reel (2500 units)
R2V
Tape and Reel (2500 units) and VDE Approved
Marking Information
1
280
2
V X YY M1
6
3
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
www.fairchildsemi.com
6
K0
P2
P0
t
D0
E
A0
W1
W
B0
d
F
D1
P
1.27 Pitch
Symbol
Dimensions (mm)
Tape Width
W
12.00 +0.30 / -0.10
Tape Thickness
t
Sprocket Hole Pitch
P0
4.00 ±0.10
Sprocket Hole Diameter
D0
1.50 +0.10 / -0.0
Sprocket Hole Location
E
1.75 ±0.10
Pocket Location
F
5.50 ±0.10
P2
2.00 ±0.10
Pocket Pitch
P
8.00 ±0.10
Pocket Dimension
A0
2.80 ±0.10
B0
7.30 ±0.10
K0
2.30 ±0.10
D1
1.50 Min.
Description
Pocket Hole Diameter
Cover Tape Width
W1
Cover Tape Thickness
d
Max. Component Rotation or Tilt
9.20
0.065 ±0.010
10° Max.
Devices Per Reel
2500
Reel Diameter
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
0.30 ±0.05
330mm (13")
www.fairchildsemi.com
7
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Tape and Reel Dimensions
0.024 (0.61)
0.060 (1.52)
0.310 (7.87)
0.190 (4.83)
0.050 (1.27)
Reflow Profile0
Package Surface Temperature T (°C)
(Heating)
to 30 s
230°C (peak temperature)
210°C
180°C
to 60 s
150 s
90 s
80 s
Time (s)
• Peak reflow temperature: 230°C (package surface temperature) for 30 seconds
• Time of temperature higher than 210°C: 60 seconds or less
• One time soldering reflow is recommended
©2011 Fairchild Semiconductor Corporation
HMHAA280 Rev. 1.1.1
www.fairchildsemi.com
8
HMHAA280 — AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler
Footprint Drawing for PCB Layout
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower
Auto-SPM
AX-CAP*
BitSiC®
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL
Current Transfer Logic
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax
ESBC
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series
FACT®
FAST®
FastvCore
FETBench
FlashWriter®*
FPS
F-PFS
FRFET®
SM
Global Power Resource
Green FPS
Green FPS e-Series
Gmax
GTO
IntelliMAX
ISOPLANAR
MegaBuck
MICROCOUPLER
MicroFET
MicroPak
MicroPak2
MillerDrive
MotionMax
Motion-SPM
mWSaver
OptoHiT
OPTOLOGIC®
OPTOPLANAR®
®
Power-SPM
PowerTrench®
PowerXS™
Programmable Active Droop
QFET®
QS
Quiet Series
RapidConfigure

Saving our world, 1mW/W/kW at a time™
SignalWise
SmartMax
SMART START
SPM®
STEALTH
SuperFET®
SuperSOT-3
SuperSOT-6
SuperSOT-8
SupreMOS®
SyncFET
Sync-Lock™
®
*
PDP SPM
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
The Power Franchise®
The Right Technology for Your Success™
TinyBoost
TinyBuck
TinyCalc
TinyLogic®
TINYOPTO
TinyPower
TinyPWM
TinyWire
TranSiC®
TriFault Detect
TRUECURRENT®*
SerDes
UHC®
Ultra FRFET
UniFET
VCX
VisualMax
XS™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a)
2. A critical component in any component of a life support, device, or
are intended for surgical implant into the body or (b) support or
system whose failure to perform can be reasonably expected to
sustain life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
accordance with instructions for use provided in the labeling, can be
safety or effectiveness.
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website,
www.fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date
technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that
may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this
global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Advance Information
Product Status
Formative /
In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I54
© Fairchild Semiconductor Corporation
www.fairchildsemi.com