Download 2 3 BFR92W

BFR92W
Low Noise Silicon Bipolar RF Transistor
• For broadband amplifiers up to 2 GHz and
fast non-saturated switches at collector currents
3
2
from 0.5 mA to 20 mA
1
• Pb-free (RoHS compliant) and halogen-free package
with visible leads
• Qualification report according to AEC-Q101 available
BDTIC
ESD (Electrostatic discharge) sensitive device, observe handling precaution!
Type
BFR92W
Marking
P1s
Pin Configuration
1=B
2=E
Package
SOT323
3=C
Maximum Ratings at TA = 25 °C, unless otherwise specified
Parameter
Symbol
Value
Unit
Collector-emitter voltage
VCEO
15
Collector-emitter voltage
VCES
20
Collector-base voltage
VCBO
20
Emitter-base voltage
VEBO
2.5
Collector current
IC
45
Base current
IB
4
Total power dissipation1)
Ptot
280
mW
Junction temperature
TJ
150
°C
Storage temperature
TStg
V
mA
TS ≤ 90 °C
-55 ... 150
Thermal Resistance
Parameter
Symbol
Junction - soldering point2)
RthJS
1T
S is
2For
Value
Unit
215
K/W
measured on the collector lead at the soldering point to the pcb
the definition of RthJS please refer to Application Note AN077 (Thermal Resistance Calculation)
1
www.BDTIC.com/infineon
2014-04-03
BFR92W
Electrical Characteristics at T A = 25 °C, unless otherwise specified
Symbol
Parameter
Values
Unit
min.
typ.
max.
15
-
-
V
ICES
-
-
10
µA
ICBO
-
-
100
nA
IEBO
-
-
100
µA
hFE
70
100
140
-
DC Characteristics
Collector-emitter breakdown voltage
V(BR)CEO
IC = 1 mA, I B = 0
Collector-emitter cutoff current
VCE = 20 V, VBE = 0
Collector-base cutoff current
BDTIC
VCB = 10 V, IE = 0
Emitter-base cutoff current
VEB = 2.5 V, IC = 0
DC current gain
IC = 15 mA, VCE = 8 V, pulse measured
2
www.BDTIC.com/infineon
2014-04-03
BFR92W
Electrical Characteristics at TA = 25 °C, unless otherwise specified
Parameter
Symbol
Values
Unit
min.
typ.
max.
3.5
5
-
Ccb
-
0.42
0.6
Cce
-
0.27
-
Ceb
-
0.66
-
AC Characteristics (verified by random sampling)
Transition frequency
fT
GHz
IC = 15 mA, VCE = 8 V, f = 500 MHz
Collector-base capacitance
pF
VCB = 10 V, f = 1 MHz, VBE = 0 ,
emitter grounded
Collector emitter capacitance
BDTIC
VCE = 10 V, f = 1 MHz, VBE = 0 ,
base grounded
Emitter-base capacitance
VEB = 0.5 V, f = 1 MHz, VCB = 0 ,
collector grounded
Minimum noise figure
dB
NFmin
IC = 2 mA, VCE = 6 V, ZS = ZSopt ,
f = 900 MHz
-
1.4
-
-
2
-
-
17
-
-
11.5
-
IC = 2 mA, VCE = 6 V, ZS = ZSopt ,
f = 1.8 GHz
Power gain, maximum available1)
Gma
IC = 15 mA, VCE = 8 V, ZS = ZSopt, ZL = ZLopt ,
f = 900 MHz
IC = 15 mA, VCE = 8 V, ZS = ZSopt, ZL = ZLopt,
f = 1.8 GHz
|S21e|2
Transducer gain
dB
IC = 15 mA, VCE = 8 V, ZS = ZL = 50 Ω,
f = 900 MHz
-
13.5
-
IC = 15 mA, VCE = 8 V, ZS = ZL = 50 Ω,
f = 1.8 MHz
-
8
-
1/2
ma = |S21e / S12e | (k-(k²-1) )
1G
3
www.BDTIC.com/infineon
2014-04-03
BFR92W
Total power dissipation P tot = ƒ(TS)
Permissible Pulse Load RthJS = ƒ(tp)
10 3
300
mW
K/W
250
10 2
RthJS
Ptot
225
200
175
10 1
150
BDTIC
0.5
0.2
0.1
0.05
0.02
0.01
0.005
D=0
125
100
10 0
75
50
25
0
0
15
30
45
60
90 105 120 °C
75
10 -1 -6
10
150
10
-5
10
-4
10
-3
TS
10
-2
s
10
0
tp
Permissible Pulse Load
Ptotmax/PtotDC = ƒ(tp )
P totmax/PtotDC
10 3
-
D=0
0.005
0.01
0.02
0.05
0.1
0.2
0.5
10 2
10 1
10 0 -6
10
10
-5
10
-4
10
-3
10
-2
s
10
0
tp
4
www.BDTIC.com/infineon
2014-04-03
Package SOT323
BFR92W
BDTIC
5
www.BDTIC.com/infineon
2014-04-03
BFR92W
Edition 2009-11-16
Published by
Infineon Technologies AG
81726 Munich, Germany
 2009 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
BDTIC
The information given in this document shall in no event be regarded as a guarantee
of conditions or characteristics. With respect to any examples or hints given herein,
any typical values stated herein and/or any information regarding the application of
the device, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties of non-infringement of
intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices,
please contact the nearest Infineon Technologies Office (<www.infineon.com>).
Warnings
Due to technical requirements, components may contain dangerous substances.
For information on the types in question, please contact the nearest Infineon
Technologies Office.
Infineon Technologies components may be used in life-support devices or systems
only with the express written approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the failure of that life-support
device or system or to affect the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body or
to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be
endangered.
6
www.BDTIC.com/infineon
2014-04-03