Download FDLL3595 High Conductance, Low Leakage Diode FDLL35 95 —

FDLL3595
High Conductance, Low Leakage Diode
Description
Cathode Band
A general purpose diode that couples high forward conductance fast swiching speed and high blocking voltages
in a glass leadless LL-34 surface mount package. Placement of the expansion gap has no relationship to the
location of the cathode terminal which is indicated by the
first color band.
SOD80
Absolute Maximum Ratings(1)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
WIV
IO
IF
if
Working Inverse Voltage
Average Rectified Current
DC Forward Current
Recurrent Peak Forward Current
IFSM
Non-repetitive Peak Forward Current
TSTG
TJ
Storage Temperature Range
Operating Junction Temperature
Pulse Width = 1.0 s
Pulse Width = 1.0 μs
Value
Units
125
200
500
600
1.0
4.0
-65 to +200
-65 to +200
V
mA
mA
mA
A
A
°C
°C
Note:
1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics
Symbol
PD
RθJA
Parameter
Power Dissipation
Linear Derating Factor from TA = 25°C
Thermal Resistance, Junction to Ambient
© 2000 Fairchild Semiconductor Corporation
FDLL3595 Rev. 1.1.0
Value
Units
500
3.33
350
mW
mW/°C
°C/W
www.fairchildsemi.com
1
FDLL3595 — High Conductance, Low Leakage Diode
April 2013
Symbol
VR
VF
Parameter
Breakdown Voltage
Forward Voltage
IR
Reverse Leakage
CT
Total Capacitance
trr
Reverse Recovery Time
© 2000 Fairchild Semiconductor Corporation
Rev. 1.1.0
Conditions
Min.
Max.
Units
520
600
680
750
mV
mV
IF = 10 mA
IF = 50 mA
650
750
800
880
mV
mV
IF = 100 mA
IF = 200 mA
790
0.83
920
1.0
mV
V
VR = 125 V
VR = 30 V, TA = 125°C
1.0
300
nA
nA
VR = 125 V, TA = 125°C
VR = 180 V, TA = 150°C
500
3.0
nA
μA
VR = 0, f = 1.0 MHz
IF = 10 mA, VR = 3.5 V
RL = 1.0 KΩ
8.0
pF
3.0
μs
IR = 100 μA
150
IF = 1.0 mA
IF = 5.0 mA
V
www.fairchildsemi.com
2
FDLL3595 — High Conductance, Low Leakage Diode
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Forward Current Derating Curve
Forward Characteristics
100
Average Rectified Forward Current, IF[A]
8
HEAT-SINK
MOUNTING, TC
4"x4"x0.15"
COPPER PLATE
6
10
4
TA = 25º C
1
2
FORWARD C
MOUNTED ON PC BOARD,
TA 0.5" (12.7mm) LEAD LENGTH
60Hz RESISTIVE OF INDUCTIVE LOAD
0
0
50
100
150
o
Ambient Temperature [ C]
Pulse Width = 300μs
1% Duty Cycle
0.1
0.7
Figure 1. Forward Current Derating Curve
0.8
0.9
1
1.1
1.2
FORWARD VOLTAGE (V)
1.3
1.4
Figure 2. Forward Characteristics
Reverse Characteristics
Non-Repetitive Surge Current
200
10
T C = 100 º C
160
1
120
80
0.1
T A = 105 º C
TA = 25 º C
40
FORWAR
REVERSE C
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Figure 3. Reverse Characteristics
0
1
2
5
10
20
50
NUMBER OF CYCLES AT 60Hz
100
Figure 4. Non-Repetitive Surge Current
Junction Capacitance
400
TA = 25º C
f = 1.0 MHz
Visg = 50m Vp-p
100
50
CAPACITANCE
10
1
5
10
REVERSE VOLTAGE (V)
50
100
Figure 5. Junction Capacitance
© 2000 Fairchild Semiconductor Corporation
Rev. 1.1.0
www.fairchildsemi.com
3
FDLL3595 — High Conductance, Low Leakage Diode
Typical Performance Characteristics
FDLL3595 — High Conductance, Low Leakage Diode
Physical Dimensions
SOD-80
0.50
0.30
C
R
0.30
0.20
1.50
1.30
2.64 REF
3.60
3.30
NOTES: UNLESS OTHERWISE SPECIFIED
A) PACKAGE STANDARD REFERENCE:
JEDEC DO-213, VARIATION AC.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C
CORNER RADIUS IS OPTIONAL.
D) DRAWING FILE NAME: SOD80A REV01
Figure 6. 2-TERMINAL, SOD-80, JEDEC DO-213AC, MINI-MELF
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:
http://www.fairchildsemi.com/packaging/tr/SOD80A_tnr.pdf.
© 2000 Fairchild Semiconductor Corporation
Rev. 1.1.0
www.fairchildsemi.com
4
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
FPS¥
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
mWSaver¥
OptoHiT¥
OPTOLOGIC®
OPTOPLANAR®
2Cool¥
AccuPower¥
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
Sync-Lock™
®
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
®*
TinyBoost¥
TinyBuck¥
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
PSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component in any component of a life support, device, or
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain
system whose failure to perform can be reasonably expected to
life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
accordance with instructions for use provided in the labeling, can be
safety or effectiveness.
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I64
© Fairchild Semiconductor Corporation
www.fairchildsemi.com