Download COMBOLIGHT New Construction Recessed Trimless - CMHMR16 - 1 Light

DESCRIPTION
An adjustable Single-lamp Recessed fixture for trimless installation suitable
for downlighting and accent applications. Utilizes ONE (1) MR16 Metal Halide
lamp.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a clean
edge. Can accommodate 0.50" (13mm) to
1.25" (32mm) ceiling thickness. Optional
Chicago Plenum configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
One (1) MR16 Metal Halide lamp mounted
in adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be
configured for remote power.
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GX10 TAL sockets.
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and
bar hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
One (1) Light
MR16 Metal Halide
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
New Construction
Housing
Trimless
Ceiling Cut-Out: 4.67" x 4.67"
(119mm x 119mm)
14.33"
364mm
13.19"
10.20"
335mm
259mm
5.75"
5.75”
146mm
10.24"
10.24”
260mm
10.24"
260mm
3.88"
Double
Gimbal
99mm
3.88"
45º x 45º
Adjust
99mm
Perforated
Meshplate
*Media Holder:
White - LNB-MH-W
Black - LNB-MH-B
Silver - LNB-MH-S
Integral Electronic
Metal Halide Ballasts
Thermal
Protector
For use with GE 20W or 39W CMH MR16
ORDERING INFORMATION
C1
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
E
Lamp Type / Wattage Label
020C16 = 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Insert Finish
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/09/2013