Download FF-5LT Fixture Fitting Specification Sheet

MWS
D ES C R IPTION
Type
Catalog #
MWS-5LT, Modular Wiring Systems with DALI Control, provides low
cost installation of both power for lighting and Class 1 control wiring for
use with Fifth Light DALI systems. Using modular components that plug
together, MWS-5LT can be installed in a fraction of the time of hardwiring
both lighting and control. Plus, MWS-5LT offers the advantage of
relocating fixtures and DALI control devices for future renovations.
®
Project
Date
Comments
The MWS Fixture Fitting with DALI Control (FF-5LT) feeds power and
control to any lighting fixture, while allowing the power and control to
feed through to the next fixture.
Prepared by
MWS Switch Drops can be connected in front of a Fixture Fitting to introduce local switching.
D ES IGN FEA TUR ES
• UL Listed under Standard 183 for
make or break under load.
• Copper conductors with THHN
insulated wire rated at 90°C.
• Powers fixture and allows circuit
to feed through to next fixture.
• Meets requirements of Article 604
of the National Electrical Code.
• 6” pre-stripped FF leads are
18AWG TFN. All leads come with
pushwire connectors.
• Positive self-grounding locking
clip fits into any 1/2” KO on fixture.
• MWS components assembled
with 12 AWG conductors rated at
20 amperes with full size ground
wire.
All unused outlets require a MWS
dust cover. MWS ST, S P, S D , C T
and TC are shipped with one dust
cover attached.
• Valox 365 constructed
contact housing approved for
environmental air plenums.
FF-5LT
FIXTURE FITTING (FF)
Modular Wiring System
D IMENS IONA L D A TA
SYSTEM VIEW (not to scale)
Extender
Cable
Fixture
Fitting
Extender
Cable
Side
Quick
Connect
Fixture Fitting (FF)
Feeds power and control to fixture
and allows circuit and control to be
carried through to other fixtures.
Locks into 1/2" KO of access plate,
fixture body or J-box. The FF adds
only 7/8" to overall height of the
fixture.
2-1/4"
[57mm]
Front
Typical MWS Wiring System
Application shown utilizing (FF).
5-5/16"
[136mm]
Top
Consult MWS Installation, Application
and Specification Manual for
additional comprehensive system
information.
MWS design layout time is reduced.
ORD ER ING INFOR M AT I O N
Bills of material are computer-generated
guaranteeing accuracy.
S A M P L E N U M B E R : 2 7 F F 1 2 /4 G5LT
MWS drawing symbols and details
standardized.
FF
Component
FF=Fixture Fitting
Layouts are available on CD or e-mail.
Conductors and Size
12/4G=#12, 4 Conductors Plus Ground
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
Options
5LT
Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative
for availability and ordering information.
SH IP P ING D A T A
Specifications and
dimensions subject to
change without notice.
YS
ER
TEM
S
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Scale is exaggerated on fixtures and
MWS system applications.
C
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Install dust covers on unused open ends.
S
UnitStandard
Wt.Qty./Carton
1 lb.
32
All electrical boxes, conduit, connections
and switches by others.
D
Voltage
12=120V
27=277V
MWS AUTOCAD DRAFTING
MWS offers AutoCAD drafting to layout
MWS, providing the contractor with
additional benefits.
TIFIE
PS510003EN
2015-04-06 11:30:04