Download MLE Series (Asia)

PHOTOVOLTAIC MODULES
MLE Series
PV-MLE265HD 265Wp
PV-MLE260HD 260Wp
PV-MLE255HD 255Wp
Solid Products, Solid Company.
Advanced Technology
Low-loss, half-cut cells
4 busbar monocrystalline cells
Proprietary cell surface texturing process for
greater light absorption
Anti-reflective glass
Optimum tab thickness
Lead-free solder connections
Selective emitter technology
Long Reliability
Outstanding durability and protection against
the elements allows the module to be
installable even in high-saline areas*
Stronger improved frame allows the module to
be fastened using the short frame sides
Passed IEC static load test of 5400Pa
Frame has a protective double layer of
corrosion-resistant coating
4-layer protective junction box
10 year product warranty
*Excluding areas in which the module is directly exposed
to salt water.
Models Assembled 100% in Japan
Mitsubishi Electric Quality
Highly automated production lines ensure a
stable level of high quality for every module
Cells are matched for uniformity before module
assembly
Every single module is sorted and labeled for
positive tolerance only
Our 25 year premium warranty covers 93% of
the nominal output for the first 10 years, then
80% for the remaining 15 years
Warranties and customer service all backed by
one of the largest and most stable electronics
manufacturers in the world
MITSUBISHI ELECTRIC PHOTOVOLTAIC MODULES
SPECIFICATIONS SHEET
Model name
Cell type
Number of cells
Performance at STC
Maximum power rating (Pmax)
Warranted minimum Pmax
Tolerance of Pmax
Open circuit voltage (Voc)
Short circuit current (Isc)
Maximum power voltage (Vmp)
Maximum power current (Imp)
Performance at NOCT (at 800W/m2)
Maximum power rating [Pmax]
Open circuit voltage [Voc]
Short circuit current [Isc]
Maximum power voltage [Vmp]
Maximum power current [Imp]
Normal operating cell temperature (NOCT)*
Maximum system voltage
Fuse rating
Dimensions
Weight
Output terminal
Module efficiency
Packing condition
Certificates
PV-MLE255HD
PV-MLE260HD
Monocrystalline silicon, 78mm × 156mm
120 cells
PV-MLE265HD
255W
255.0W
260W
260.0W
-0 / +5%
38.0V
8.98A
31.4V
8.29A
265W
265.0W
189W
34.7V
7.27A
28.2V
6.69A
45.7 ˚C
600V (UL), 1000V (IEC)
15A
1625×1019×46mm (64.0×40.1×1.81 inches)
20kg (44lbs.)
(+) 800mm / (-) 1250mm with SMK (PV-03) connector
15.7%
2 modules per carton
IEC 61215 2nd ed., IEC 61730, UL1703
192W
34.9V
7.35A
28.4V
6.76A
37.8V
8.89A
31.2V
8.18A
185W
34.5V
7.19A
28.0V
6.60A
15.4%
38.2V
9.08A
31.7V
8.38A
16.0%
*Measured at 800W/m2, ambient temp. 20˚C, wind speed 1m/s
Temperature Coeffient
(Isc) 0.056%/ ˚C
(Voc) -0.350%/ ˚C
(Pmax) -0.450%/ ˚C
DRAWINGS AND DIMENSIONS
ø9 [ø0.35] (4 PLACES)
(− )
ø4.09 [ø0.16] (4 PLACES)
1000 [39.4]
1200 [47.2]
ø4.09 [ø0.16] (4 PLACES)
976 [38.4]
1167 [45.9]
46 [1.81]
1625 [64.0]
1019 [40.1]
(+)
Unit : mm [ inch ]
ELECTRICAL CHARACTERISTICS
Electrical Performance
(Cell temperature : 25℃)
9
Temperature dependence of Isc, Voc and Pmax
Current-Voltage
Power-Voltage
10
280
140
240
120
Irradiance dependence of Isc, Voc and Pmax
(Cell temperature : 25℃ )
140
1000 W/m2
900 W/m2
120
200
7
Current (A)
160
600 W/m2
5
500 W/m2
120
4
400 W/m2
3
300 W/m2
2
200 W/m2
Power (W)
700 W/m2
6
80
Isc
100
Voc
Pmax
80
60
40
40
20
0
0
Temp. Coeff. of Isc = +0.056%/ ℃
Temp. Coeff. of Voc = - 0.350%/ ℃
Temp. Coeff. of Pmax = - 0.450%/ ℃
1
0
0
10
20
Voltage (V)
30
40
Case of PV-MLE260HD
Normalized Isc Voc and Pmax (%)
800 W/m2
Normalized Isc, Voc and Pmax (%)
8
100
Voc
80
60
40
Isc
20
Pmax
0
-25
0
25
50
75
100
Cell temperature ( ℃ )
0
200
400
600
800
1000
1200
Irradiance (W/m2)
307 ALEXANDRA ROAD, MITSUBISHI ELECTRIC BUILDING, SINGAPORE 159943
Phone: +65-6470 2601 FAX: +65-6476 0590
http://www.MitsubishiElectric.com.sg
New publication effective Sep. 2012.
Specifications are subject to change without notice.
L-175-2-B9072-A NK1209 Printed in Japan (MDOC)
2012