Download ppt

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Peering wikipedia , lookup

Zero-configuration networking wikipedia , lookup

Distributed firewall wikipedia , lookup

Piggybacking (Internet access) wikipedia , lookup

Computer network wikipedia , lookup

Recursive InterNetwork Architecture (RINA) wikipedia , lookup

Net bias wikipedia , lookup

IEEE 802.1aq wikipedia , lookup

Airborne Networking wikipedia , lookup

Network tap wikipedia , lookup

RapidIO wikipedia , lookup

Asynchronous Transfer Mode wikipedia , lookup

IEEE 1355 wikipedia , lookup

Deep packet inspection wikipedia , lookup

Routing in delay-tolerant networking wikipedia , lookup

Routing wikipedia , lookup

Cracking of wireless networks wikipedia , lookup

Wake-on-LAN wikipedia , lookup

Multiprotocol Label Switching wikipedia , lookup

Transcript
15-744: Computer Networking
L-8 Routers
Forwarding and Routers
•
•
•
•
Forwarding
IP lookup
High-speed router architecture
Readings
• [McK97] A Fast Switched Backplane for a Gigabit
Switched Router
• [KCY03] Scaling Internet Routers Using Optics
• Know RIP/OSPF
• Optional
• [D+97] Small Forwarding Tables for Fast Routing
Lookups
• [BV01] Scalable Packet Classification
2
Outline
•
•
•
•
IP router design
IP route lookup
Variable prefix match algorithms
Alternative methods for packet forwarding
3
IP Router Design
• Different architectures for different types of
routers
• High speed routers incorporate large number of
processors
• Common case is optimized carefully
4
What Does a Router Look Like?
• Currently:
• Network controller
• Line cards
• Switched backplane
• In the past?
• Workstation
• Multiprocessor workstation
• Line cards + shared bus
5
Line Cards
• Network interface cards
• Provides parallel processing of packets
• Fast path per-packet processing
• Forwarding lookup (hardware/ASIC vs. software)
6
Network Processor
• Runs routing protocol and downloads forwarding
table to line cards
• Some line cards maintain two forwarding tables to allow
easy switchover
• Performs “slow” path processing
• Handles ICMP error messages
• Handles IP option processing
7
Switch Design Issues
• Have N inputs and M outputs
• Multiple packets for same output – output contention
• Switch contention – switch cannot support arbitrary set
of transfers
• Crossbar
• Bus
• High clock/transfer rate needed for bus
• Banyan net
• Complex scheduling needed to avoid switch contention
• Solution – buffer packets where needed
8
Switch Buffering
• Input buffering
• Which inputs are processed each slot – schedule?
• Head of line packets destined for busy output blocks other packets
• Output buffering
• Output may receive multiple packets per slot
• Need speedup proportional to # inputs
• Internal buffering
• Head of line blocking
• Amount of buffering needed
9
Line Card Interconnect
• Virtual output buffering
• Maintain per output buffer at input
• Solves head of line blocking problem
• Each of MxN input buffer places bid for output
• Crossbar connect
• Challenge: map of bids to schedule for crossbar
10
ISLIP
11
ISLIP (cont.)
12
What Limits Router Capacity?
12
Approximate power consumption per rack
Power (kW)
10
8
6
4
2
0
1990
1993
1996
1999
2002
2003
Power density is the limiting factor today
13
Multi-rack Routers Reduce Power Density
Crossbar
Linecards
Switch
Linecards
14
Examples of Multi-rack Routers
Alcatel 7670 RSP
Juniper TX8/T640
TX8
Avici TSR
Chiaro
15
Limits to Scaling
• Overall power is dominated by linecards
• Sheer number
• Optical WAN components
• Per packet processing and buffering.
• But power density is dominated by switch fabric
16
Multi-rack Routers Reduce Power Density
Switch
Limit today ~2.5Tb/s
 Electronics
 Scheduler scales <2x every 18 months
 Opto-electronicLinecards
conversion
17
Question
• Instead, can we use an optical fabric at
100Tb/s with 100% throughput?
• Conventional answer: No
• Need to reconfigure switch too often
• 100% throughput requires complex electronic
scheduler.
18
If Traffic is Uniform…
R
R/N
In
R/N
Out
R
Out
R
Out
R
R/N
 R/ N
R R R / N
 R/ N
In
R
R/N
R/N
R/N
R/N
R
In
R/N
R/N
19
Real Traffic is Not Uniform
R RR RR // NN
 R/ N
In
R
R/N
R/N
Out
R
Out
R
Out
R
R/N
 R/ N
R RR R / N
 R/ N
?
In
R
R/N
R/N
R/N
R/N
 R/ N
R
R
R  R/ N
 R/ N
R/N
In
R
R/N
20
Two-stage Load-Balancing Switch
R
R
R
In
In
In
R/N
R/N
Out
R
R/N
R/N
R/N
R/N
R/N
R/N
R/N
Out
R
R/N
R/N
R/N
R/N
R/N
R/N
R/N
Out
R
Load-balancing stage
R/N
R/N
Out
R
Out
R
Out
R
Switching stage
100% throughput for weakly mixing, stochastic traffic
[C.-S. Chang, Valiant]
21
3
R
R
In
In
R/N
R/N
R/N
R/N
R/N
R/N
R/N
In
R/N
R/N
Out
R
1
Out
R
2
Out
R
3
R/N
R/N
R/N
R
R/N
R/N
R/N
R/N
R/N
R/N
22
R
R
In
In
R/N
R/N
R/N
3
R/N
R/N
R/N
R/N
R/N
3
In
Out
R
2
Out
R
3
R/N
R/N
R/N
R/N
1
R/N
R/N
R
R
R/N
R/N
R/N
Out
3
R/N
23
Static WDM Switching
A
B
C
In
Out
In
Out
In
Out
A, A, A, A
A, B, C, D
B, B, B, B
A, B, C, D
C, C, C, C
A, B, C, D
D, D, D, D
D
In
Out
Array
Waveguide
Router
(AWGR)
Passive and
Almost Zero
Power
A, B, C, D
4 WDM channels,
each at rate 2R/N
24
Linecard Dataflow
In
l1
2 2 2
R
lN
l1
lN
R
1 1 1 R
2 2
3
4
Out
R
2
2
WDM
2
1
3
WDM
1
l1
WDM
R
l1, l2,.., lN
R
l1, l2,.., lN
R
l1, l2,.., lN
R
l1, l2,.., lN
lN
1 l
1 1 11 1 1
1
1 l
N
WDM
25
Outline
•
•
•
•
IP router design
IP route lookup
Variable prefix match algorithms
Alternative methods for packet forwarding
26
Original IP Route Lookup
• Address classes
• A: 0 | 7 bit network | 24 bit host (16M each)
• B: 10 | 14 bit network | 16 bit host (64K)
• C: 110 | 21 bit network | 8 bit host (255)
• Address would specify prefix for forwarding table
• Simple lookup
27
Original IP Route Lookup – Example
• www.cmu.edu address 128.2.11.43
• Class B address – class + network is 128.2
• Lookup 128.2 in forwarding table
• Prefix – part of address that really matters for routing
• Forwarding table contains
• List of class+network entries
• A few fixed prefix lengths (8/16/24)
• Large tables
• 2 Million class C networks
• 32 bits does not give enough space encode network
location information inside address – i.e., create a
structured hierarchy
28
CIDR Revisited
• Supernets
• Assign adjacent net addresses to same org
• Classless routing (CIDR)
• How does this help routing table?
• Combine routing table entries whenever all nodes with
same prefix share same hop
• Routing protocols carry prefix with destination network
address
• Longest prefix match for forwarding
29
CIDR Illustration
Provider is given 201.10.0.0/21
Provider
201.10.0.0/22
201.10.4.0/24
201.10.5.0/24
201.10.6.0/23
30
CIDR Shortcomings
• Multi-homing
• Customer selecting a new provider
201.10.0.0/21
Provider 1
201.10.0.0/22 201.10.4.0/24
201.10.5.0/24
Provider 2
201.10.6.0/23 or Provider 2 address
31
Outline
•
•
•
•
IP router design
IP route lookup
Variable prefix match algorithms
Alternative methods for packet forwarding
32
Trie Using Sample Database
Trie
Sample Database
Root
0
1
P5
P4
1
0
P1
0
1
0
0
P6
0
P2
0
1
0
P7
0
P8
P3
•
•
•
•
•
•
•
•
P1 = 10*
P2 = 111*
P3 = 11001*
P4 = 1*
P5 = 0*
P6 = 1000*
P7 = 100000*
P8 = 1000000*
33
Speeding up Prefix Match (P+98)
• Cut prefix tree at 16 bit depth
•
•
•
•
64K bit mask
Bit = 1 if tree continues below cut (root head)
Bit = 1 if leaf at depth 16 or less (genuine head)
Bit = 0 if part of range covered by leaf
35
Prefix Tree
1 0 0 0 1 0 1 1 1 0 0 0 1 1 1 1
0
1
Port 1
2
3
4
Port 5
5
6
7
8
Port 7
Port 3
9 10 11 12 13 14 15
Port 9
Port 5
36
Prefix Tree
1 0 0 0 1 0 1 1 1 0 0 0 1 1 1 1
0
1
2
3
4
5
6
7
Subtree 1
8
9 10 11 12 13 14 15
Subtree 2
Subtree 3
37
Speeding up Prefix Match (P+98)
• Each 1 corresponds to either a route or a subtree
• Keep array of routes/pointers to subtree
• Need index into array – how to count # of 1s
• Keep running count to 16bit word in base index + code
word (6 bits)
• Need to count 1s in last 16bit word
• Clever tricks
• Subtrees are handled separately
38
Speeding up Prefix Match (P+98)
• Scaling issues
• How would it handle IPv6
• Update issues
• Other possibilities
• Why were the cuts done at 16/24/32 bits?
• Improve data structure by shuffling bits
39
Speeding up Prefix Match - Alternatives
• Route caches
• Temporal locality
• Many packets to same destination
• Other algorithms
• Waldvogel – Sigcomm 97
• Binary search on prefixes
• Works well for larger addresses
• Bremler-Barr – Sigcomm 99
• Clue = prefix length matched at previous hop
• Why is this useful?
• Lampson – Infocom 98
• Binary search on ranges
40
Speeding up Prefix Match - Alternatives
• Content addressable memory (CAM)
• Hardware based route lookup
• Input = tag, output = value associated with tag
• Requires exact match with tag
• Multiple cycles (1 per prefix searched) with single CAM
• Multiple CAMs (1 per prefix) searched in parallel
• Ternary CAM
• 0,1,don’t care values in tag match
• Priority (I.e. longest prefix) by order of entries in CAM
41
Outline
•
•
•
•
IP router design
IP route lookup
Variable prefix match algorithms
Alternative methods for packet forwarding
42
Techniques for Forwarding Packets
• Source routing
• Packet carries path
• Table of virtual circuits
• Connection routed through network to setup state
• Packets forwarded using connection state
• Table of global addresses (IP)
• Routers keep next hop for destination
• Packets carry destination address
43
Source Routing
• List entire path in packet
• Driving directions (north 3 hops, east, etc..)
• Router processing
• Examine first step in directions
• Strip first step from packet
• Forward to step just stripped off
Packet
R2, R3, R
R3, R
2
Sender
1
R1
2
3
R2
1
4
3
4
R
2
1
R3
4
3
Receiver
44
Source Routing
• Advantages
• Switches can be very simple and fast
• Disadvantages
• Variable (unbounded) header size
• Sources must know or discover topology (e.g., failures)
• Typical use
• Ad-hoc networks (DSR)
• Machine room networks (Myrinet)
45
Virtual Circuits/Tag Switching
• Connection setup phase
• Use other means to route setup request
• Each router allocates flow ID on local link
• Creates mapping of inbound flow ID/port to outbound
flow ID/port
• Each packet carries connection ID
• Sent from source with 1st hop connection ID
• Router processing
• Lookup flow ID – simple table lookup
• Replace flow ID with outgoing flow ID
• Forward to output port
46
Virtual Circuits Examples
Packet
5
7
2
Sender
1
R1
2
3
R2
1
4
1,7  4,2
3
4
1,5  3,7
2
2
1
R3
4
3
Receiver
6
2,2  3,6
47
Virtual Circuits
• Advantages
•
•
•
•
More efficient lookup (simple table lookup)
More flexible (different path for each flow)
Can reserve bandwidth at connection setup
Easier for hardware implementations
• Disadvantages
• Still need to route connection setup request
• More complex failure recovery – must recreate connection state
• Typical uses
• ATM – combined with fix sized cells
• MPLS – tag switching for IP networks
48
IP Datagrams on Virtual Circuits
• Challenge – when to setup connections
• At bootup time – permanent virtual circuits
(PVC)
• Large number of circuits
• For every packet transmission
• Connection setup is expensive
• For every connection
• What is a connection?
• How to route connectionless traffic?
49
IP Datagrams on Virtual Circuits
• Traffic pattern
•
•
•
•
Few long lived flows
Flow – set of data packets from source to destination
Large percentage of packet traffic
Improving forwarding performance by using virtual
circuits for these flows
• Other traffic uses normal IP forwarding
50
Summary: Addressing/Classification
• Router architecture carefully optimized for IP
forwarding
• Key challenges:
• Speed of forwarding lookup/classification
• Power consumption
• Some good examples of common case
optimization
• Routing with a clue
• Classification with few matching rules
• Not checksumming packets
51
Open Questions
• Fanout vs. bandwidth
• MPLS vs. longest prefix match
• More vs. less functionality in routers
• Hardware vs. software
• CAMs vs. software
• Impact of router design on network design
52