Download Module 9 VLAN Trunking Protocol

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Net bias wikipedia , lookup

Piggybacking (Internet access) wikipedia , lookup

Wireless security wikipedia , lookup

Zigbee wikipedia , lookup

IEEE 1355 wikipedia , lookup

Distributed firewall wikipedia , lookup

Nonblocking minimal spanning switch wikipedia , lookup

IEEE 802.11 wikipedia , lookup

Zero-configuration networking wikipedia , lookup

Asynchronous Transfer Mode wikipedia , lookup

Wake-on-LAN wikipedia , lookup

Peering wikipedia , lookup

Deep packet inspection wikipedia , lookup

Computer network wikipedia , lookup

CAN bus wikipedia , lookup

Network tap wikipedia , lookup

Airborne Networking wikipedia , lookup

IEEE 802.1aq wikipedia , lookup

Internet protocol suite wikipedia , lookup

Cracking of wireless networks wikipedia , lookup

Spanning Tree Protocol wikipedia , lookup

Recursive InterNetwork Architecture (RINA) wikipedia , lookup

UniPro protocol stack wikipedia , lookup

Multiprotocol Label Switching wikipedia , lookup

Virtual LAN wikipedia , lookup

Transcript
Virtual Links: VLANs and
Tunneling
CS 4251: Computer Networking II
Nick Feamster
Spring 2008
Why VLANs?
• Layer 2: devices on one VLAN cannot
communicate with users on another VLAN
without the use of routers and network layer
addresses
• Advantages
– Help control broadcasts (primarily MAC-layer
broadcasts)
– Switch table entry scaling
– Improve network security
– Help logically group network users
• Key feature: Divorced from physical network
topology
VLAN basics
• VLAN configuration issues:
–
–
–
–
A switch creates a broadcast domain
VLANs help manage broadcast domains
VLANs can be defined on port groups, users or protocols
LAN switches and network management software provide a
mechanism to create VLANs
• VLANs help control the size of broadcast domains
and localize traffic.
• VLANs are associated with individual networks.
• Devices in different VLANs cannot directly
communicate without the intervention of a Layer 3
routing device.
VLAN Trunking Protocol
• VLAN trunking: many VLANs throughout an
organization by adding special tags to frames
to identify the VLAN to which they belong.
• This tagging allows many VLANs to be
carried across a common backbone, or trunk.
• IEEE 802.1Q trunking protocol is the
standard, widely implemented trunking
protocol
Trunking: History
• An example of this in a communications network
is a backbone link between an MDF and an IDF
• A backbone is composed of a number of trunks.
VLAN Trunking
• Conserve ports when creating a link between
two devices implementing VLANs
• Trunking will bundle multiple virtual links over
one physical link by allowing the traffic for
several VLANs to travel over a single cable
between the switches.
Trunking Operation
• Manages the transfer of frames from different
VLANs on a single physical line
• Trunking protocols establish agreement for the
distribution of frames to the associated ports at
both ends of the trunk
• Two mechanisms
– frame filtering
– frame tagging
Frame Filtering
Frame Tagging
• A frame tagging mechanism assigns an
identifier, VLAN ID, to the frames
– Easier management
– Faster delivery of frames
Frame Tagging
• Each frame sent on the link is tagged to
identify which VLAN it belongs to.
• Different tagging schemes exist
• Two common schemes for Ethernet frames
– 802.1Q: IEEE standard
• Encapsulates packet in an additional 4-byte
header
– ISL – Cisco proprietary Inter-Switch Link protocol
• Tagging occurs within the frame itself
VLANs and trunking
• VLAN frame tagging is an approach that has been
specifically developed for switched communications.
• Frame tagging places a unique identifier in the
header of each frame as it is forwarded throughout
the network backbone.
• The identifier is understood and examined by each
switch before any broadcasts or transmissions are
made to other switches, routers, or end-station
devices.
• When the frame exits the network backbone, the
switch removes the identifier before the frame is
transmitted to the target end station.
• Frame tagging functions at Layer 2 and requires little
processing or administrative overhead.
Inter-VLAN Routing
• If a VLAN spans across multiple devices a
trunk is used to interconnect the devices.
• A trunk carries traffic for multiple VLANs.
• For example, a trunk can connect a switch to
another switch, a switch to the inter-VLAN
router, or a switch to a server with a special
NIC installed that supports trunking.
• Remember that when a host on one VLAN
wants to communicate with a host on another,
a router must be involved.
Inter-VLAN Issues and Solutions
• Hosts on different VLANs must communicate
• Logical connectivity: a single connection, or
trunk, from the switch to the router
– That trunk can support multiple VLANs
– This topology is called a router on a stick because
there is a single connection to the router
Physical and logical interfaces
• The primary advantage of using a trunk link is a
reduction in the number of router and switch
ports used.
• Not only can this save money, it can also reduce
configuration complexity.
• Consequently, the trunk-connected router
approach can scale to a much larger number of
VLANs than a one-link-per-VLAN design.
Why Tunnel?
• Security
– E.g., VPNs
• Flexibility
– Topology
– Protocol
• Bypassing local network engineers
– Oppressive regimes: China, Pakistan, TS…
• Compatibility/Interoperability
• Dispersion/Logical grouping/Organization
• Reliability
– Fast Reroute, Resilient Overlay Networks (Akamai SureRoute)
• Stability (“path pinning”)
– E.g., for performance guarantees
MPLS Overview
• Main idea: Virtual circuit
– Packets forwarded based only on circuit identifier
Source 1
Destination
Source 2
Router can forward traffic to the same destination on
different interfaces/paths.
Circuit Abstraction: Label Swapping
D
A
1
Tag Out New
A
2
2
3
D
• Label-switched paths (LSPs): Paths are “named” by
the label at the path’s entry point
• At each hop, label determines:
– Outgoing interface
– New label to attach
• Label distribution protocol: responsible for
disseminating signalling information
Layer 3 Virtual Private Networks
• Private communications over a public network
• A set of sites that are allowed to communicate with
each other
• Defined by a set of administrative policies
– determine both connectivity and QoS among sites
– established by VPN customers
– One way to implement: BGP/MPLS VPN
mechanisms (RFC 2547)
Building Private Networks
• Separate physical network
– Good security properties
– Expensive!
• Secure VPNs
– Encryption of entire network stack between endpoints
• Layer 2 Tunneling Protocol (L2TP)
– “PPP over IP”
– No encryption
• Layer 3 VPNs
Privacy and
interconnectivity
(not confidentiality,
integrity, etc.)
Layer 2 vs. Layer 3 VPNs
• Layer 2 VPNs can carry traffic for many different
protocols, whereas Layer 3 is “IP only”
• More complicated to provision a Layer 2 VPN
• Layer 3 VPNs: potentially more flexibility, fewer
configuration headaches
Layer 3 BGP/MPLS VPNs
VPN A/Site 2
10.2/16
VPN B/Site 1
10.1/16
CE B1
P1
2
10.2/16
CEA2
1
CEB2
PE2
VPN B/Site 2
CE B1
P2
PE1
CEA1
BGP to exchange routes
PE3
P3
MPLS to forward traffic
CEA3
10.3/16
CEB3
10.1/16
VPN A/Site 1
VPN A/Site 3
10.4/16
VPN B/Site 3
• Isolation: Multiple logical networks over a
single, shared physical infrastructure
• Tunneling: Keeping routes out of the core
High-Level Overview of Operation
• IP packets arrive at PE
• Destination IP address is looked up in
forwarding table
• Datagram sent to customer’s network using
tunneling (i.e., an MPLS label-switched path)
BGP/MPLS VPN key components
• Forwarding in the core: MPLS
• Distributing routes between PEs: BGP
• Isolation: Keeping different VPNs from routing
traffic over one another
– Constrained distribution of routing information
– Multiple “virtual” forwarding tables
• Unique addresses: VPN-IP4 Address extension
Virtual Routing and Forwarding
• Separate tables per customer at each router
Customer 1
10.0.1.0/24
Customer 1
10.0.1.0/24
RD: Green
Customer 2
10.0.1.0/24
Customer 2
10.0.1.0/24
RD: Blue
Routing: Constraining Distribution
• Performed by Service Provider using route filtering based
on BGP Extended Community attribute
– BGP Community is attached by ingress PE route filtering
based on BGP Community is performed by egress PE
BGP
Static route,
RIP, etc.
Site 1
A
Site 2
RD:10.0.1.0/24
Route target: Green
Next-hop: A
10.0.1.0/24
Site 3
Forwarding
• PE and P routers have BGP next-hop reachability
through the backbone IGP
• Labels are distributed through LDP (hop-by-hop)
corresponding to BGP Next-Hops
• Two-Label Stack is used for packet forwarding
• Top label indicates Next-Hop (interior label)
• Second level label indicates outgoing interface or
VRF (exterior label)
Corresponds to
VRF/interface at exit
Corresponds to LSP of
BGP next-hop (PE)
Layer 2
Header
Label
1
Label
2
IP Datagram
Forwarding in BGP/MPLS VPNs
• Step 1: Packet arrives at incoming interface
– Site VRF determines BGP next-hop and Label #2
Label
2
IP Datagram
• Step 2: BGP next-hop lookup, add
corresponding LSP (also at site VRF)
Label
1
Label
2
IP Datagram