Download Chapter 2 Networking Standards and the OSI Model

Chapter 2
Networking Standards
and the OSI Model
Collected and Compiled
By JD Willard
MCSE, MCSA, Network+,
Microsoft IT Academy Administrator
Computer Information Systems Instructor
Albany Technical College
Attention: Accessing Demos
• This course presents many demos.
• The Demos require that you be logged in to the Virtual
Technical College web site when you click on them to run.
• To access and log in to the Virtual Technical College web site:
– To access the site type www.vtc.com in the url window
– Log in using the username: CIS 1140 or ATCStudent1
– *Enter the password: student
• If you should click on the demo link and you get an Access
Denied it is because you have not logged in to vtc.com or you
need to log out and log back in.
*Remember that passwords are case sensitive so enter it in all lower case
letters.
Objectives
• Identify organizations that set standards for networking
• Describe the purpose of the OSI Model and each of its
layers
• Explain specific functions belonging to each OSI Model
layer
• Understand how two network nodes communicate through
the OSI model
• Discuss the structure and purpose of data packets and
frames
• Describe the two types of addressing covered by the OSI
Model
Networking Standards
Organizations
• Standards: documented agreements
containing technical specifications or other
precise criteria stipulating how particular
products or services should be designed or
performed. Standards assist in network
design.
– Define minimum acceptable performance
• Many different organizations have evolved
to oversee computer industry’s standards
ANSI
• The American National Standards Institute or ANSI
accredits standards that are developed by representatives of
standards developing organizations, government agencies,
consumer groups, companies, and others. These standards
ensure that the characteristics and performance of products
are consistent, that people use the same definitions and
terms, and that products are tested the same way.
• In addition, ANSI promotes the use of U.S. standards
internationally, advocates U.S. policy and technical
positions in international and regional standards
organizations and encourages the adoption of international
standards as national standards where appropriate.
• The Institute is the official U.S. representative the
International Organization for Standardization. (ISO).
EIA and TIA
• Electronic Industries Alliance (EIA): Trade
organization composed of representatives from
electronics manufacturing firms across US
– Sets standards for its members
– Helps write ANSI standards
– Lobbies for legislation favorable to growth of computer
and electronics industries
• Telecommunications Industry Association (TIA):
Focuses on standards for information technology
(IT), wireless, satellite, fiber optics, and telephone
equipment
IEEE
• Institute of Electrical and Electronics Engineers
• International society composed of engineering
professionals
• Goals are to promote development and education
in electrical engineering and computer science
• IEEE technical papers and standards are highly
respected in the networking profession
– Can purchase IEEE documents online from IEEE’s
Web site (www.ieee.org)
ISO
• International Organization for Standardization
• Collection of organization standards representing
146 countries
• Goal is to establish international technological
standards to facilitate global exchange of
information and barrier-free trade
• Fewer than 300 of ISO’s more than 14,250
standards apply to computer-related products and
functions
ITU
• International Telecommunication Union
• Regulates international telecommunications:
–
–
–
–
Radio and TV frequencies
Satellite and telephony specifications
Networking infrastructure
Tariffs applied to global communications
• Typically, documents pertain more to global
telecommunications issues than to industry
technical specifications
• The ITU is a specialized United Nations agency
that provides developing countries with technical
expertise and equipment to advance those nations’
technological bases.
ISOC
• Internet Society
• Professional membership society that helps to
establish technical standards for the Internet
• Oversees groups with specific missions:
– Internet Architecture Board (IAB): Technical advisory
group of researchers and professionals
• Interested in overseeing Internet’s design and management
– Internet Engineering Task Force (IETF): Sets standards
for how systems communicate over the Internet
• How protocols operate and interact
IANA and ICANN
• Internet Protocol (IP) addresses: Addresses used to identify
computers on the Internet and other TCP/IP-based
networks
• Internet Assigned Numbers Authority (IANA): Used to
keep records of available and reserved IP addresses and
determines how addresses were doled out
• Internet Corporation for Assigned Names and Numbers
(ICANN): Ultimately responsible for IP addressing and
domain name management
– IANA still performs system administration
• Individuals and businesses lease addresses from Internet
Service Provider (ISP)
– Business providing access to Internet and other services
Development and Reason for Model Demo
What is the OSI Model? Demo
The OSI Model
• Open Systems Interconnection
(OSI) Model: divides network
communications into seven layers:
– Physical, Data Link, Network,
Transport, Session,
Presentation, and Application
• Protocols perform services unique
to layer
• Protocols interact with protocols in
layers directly above and below
• Protocol: set of instructions to
perform a function or group of
functions
– Written by a programmer
The OSI Model Demo
OSI Model Layer Mnemonics
OSI Layer
Down
Up
Application
Presentation
Session
Transport
Network
Data-Link
Physical
All
People
Seem
To
Need
Data
Processing
Away
Pizza
Sausage
Throw
Not
Do
Please
The OSI Model
• Theoretical representation of
what happens between two
nodes communicating on a
network
– Does not prescribe type of
hardware or software that
should support each layer
– Does not describe how
software programs interact
with other software
programs or how software
programs interact with
humans
• Each layer communicates with
same layer from one computer to
another (peer protocols)
• Model is imperfect
Overview of Layered Architecture Demo
The OSI Model
The layers of the model Demo
Upper Layers Demo
Lower Layers Demo
•The Application, Presentation
and Session layers are known
as the Upper Layers and are
implemented in software
•The Transport and Network
layer are mainly concerned
with protocols for delivery and
routing of packets and are
implemented in software as
well
•The Data Link is implemented
in hard- and software
•The Physical layer is
implemented in hardware only,
hence its name. These lower
two layers define LAN and
WAN specifications.
The OSI Model
•
•
•
•
•
•
Flow of data through the OSI Model
A more detailed description of each layer
follows later, but here's what basically
happens when data passes from Host A
to Host B:
The Application, Presentation and
Session layers take user input and
converts it into data
The Transport layer adds a segment
header converting the data into segments
The Network layer adds a network header
and converts the segments into packets /
datagrams
The Data Link layer adds a frame header
converting the packets/datagrams into
frames, the MAC sublayer converts the
frames into bits, which the Physical layer
can put on the wire.
These steps are known as data
encapsulation.
When the bits stream arrives at the
destination, the process is reversed and
each layer will remove their
corresponding header while the data
flows up the OSI model until it is
converted back to data and presented to
the user. This is also known as
decapsulation.
Packet Assembly and
Disassembly Process
Each successive layer adds
formatting and peer control
information to the data in the form of
a header. At the receiving end the
headers are stripped off by the
corresponding layers to determine
how to handle the data. At the Data
Link layer an error checking
mechanism known as the Frame
check sequence is added as a
trailer.
Packet Assembly and
Disassembly Process
Source Computer
Destination Computer
Application Layer (7)
•
•
•
•
•
•
•
•
•
Topmost layer
Represents services that directly support user applications
Window to network services
Services facilitate communication between software and lower-layer
network services
– Helps software applications negotiate formatting, procedural,
security, synchronization, and other requirements with network
Hypertext Transfer Protocol (HTTP): formats and sends requests from
client’s browser to server
– Also formats and sends Web server’s response back to client’s
browser
Application program interface (API): set of routines that make up part
of a software application
Handles network access, flow control, and error recovery
SNMP, FTP, Telnet, DHCP, DNS, WINS, POP, IMAP and SMTP
protocols function at this level
The Application layer separates data into PDUs (protocol data units),
or discrete amounts of data.
The Application Layer Demo
Presentation Layer (6)
• Network translator
• Protocols accept Application layer data and format it
– So that one type of application and host can understand data from
another type of application and host
• e.g., translation and conversion between graphics file types
• Examples of specifications defined at this layer are GIF, JPEG,
MPEG, MIME, and ASCII.
• On sending end, determines formatting used to exchange data
among computers and adds formatting so data can be understood
by network
• On receiving end, translates data from application format to a
common intermediate format
• Manages data compression, translation, encryption
• I/O redirectors work to redirect resources to a server
• The Server and Workstation Services work at this layer
The Presentation Layer Demo
Session Layer (5)
•
•
•
•
•
•
•
•
Allows two applications on different computers to open, use, and close connections
Protocols coordinate and maintain communications between two network nodes
– Establish and maintain communications link for duration of session
– Synchronize dialogue between two nodes
– Terminate communications
Performs name recognition and provides security
Monitors identification of session participants
– Ensures that only authorized nodes have access
Provides synchronization by placing checkpoints in the data stream
– Determine if communications have been cut off
• Determine where to restart transmission
Implements dialog control between communication processes
Examples of protocols/API's that operate on this layer are RPC and NETBIOS.
Sets terms of communication
– Decides which node will communicate first
– Decides how long a node can communicate
The Session Layer Demo
Transport Layer (4)
•
•
•
•
Protocols accept data from Session layer and manage end-to-end delivery
of data
– Ensure data transferred reliably, in correct sequence, and without
errors
Protocols also handle flow control
– Gauging appropriate rate of transmission based on how fast recipient
can accept data
Transmission Control Protocol (TCP): Takes care of reliably transmitting
HTTP requests from client to server and vice versa
Connection-oriented protocols: ensure that data arrives exactly as it was
sent
– Establish connection before transmitting data
– TCP is connection-oriented
• Client’s TCP protocol first sends synchronization (SYN) packet
request to server
• Server responds with synchronization-acknowledgment (SYNACK) packet
• Client responds with own acknowledgment (ACK)
Transport Layer (4)
• Acknowledgments also used to ensure that data was
properly delivered
– For every data unit sent, connection-oriented protocol
expects acknowledgment from recipient
• If no acknowledgment, data retransmitted
• Connection-oriented protocols (TCP & SPX) use a
checksum
– Unique character string allowing receiving node to
determine if arriving data unit exactly matches data unit
sent by source
• Connectionless protocols ( UDP) do not establish
connection before transmitting
– No effort to ensure data delivered error-free
The Transport Layer Demo
Transport Layer (4)
• Transport layer protocols break large data units received
from Session layer into smaller segments (segmentation)
• Maximum transmission unit (MTU): largest data unit a
given network will carry
• Reassembly: process of reconstructing segmented data
units
• Sequencing: method of identifying segments that belong to
same group of subdivided data
– Indicates where unit of data begins
– Indicates order in which groups of data were issued
– Transport layer protocols of two nodes must synchronize timing
and agree on starting point for the transmission
Transport Layer
Segmentation and Reassembly
Network Layer (3)
•
•
•
•
•
•
•
•
•
•
Network layer protocols accept Transport layer segments and add logical
addressing information in network header to form packets
Primary functions of protocols:
– Translate network addresses into physical counterparts (ARP)
– Decide how to route data from sender to receiver (RIP OSPF IGMP BGP)
Addresses the package using network address scheme (IP IPX)
Each node has two types of addresses:
– Network address: follows hierarchical addressing scheme
• Can be assigned through OS software
• Network layer addresses, logical addresses, or virtual addresses
– Physical address
Network layer handles routing
Determines the best route on the network based on network conditions, priority
of service
Performs packet switching, routing, traffic management, and controls congestion
of data
IP: Network layer protocol that underlies most Internet traffic
Fragmentation: Network layer protocol subdivides segments it receives from
Transport layer into smaller packets
Troubleshooting network connectivity (ICMP)
The Network Layer Demo
Data-Link Layer (2)
•
•
•
•
•
•
•
•
Takes packets received from the Network layer and encapsulates them into frames
Protocols divide received data into distinct frames
– Can then be transmitted by Physical layer
Appends Physical address and Frame check sequence to the frame
Parts of data frame: Destination ID, Sender ID, Control Data
Acknowledges data frames, error checking, and verification
Frame: structured package for moving data
– Raw data
• “payload”
– Sender’s and receiver’s network addresses
– Error checking and control information
Error checking accomplished by 4-byte Frame Check Sequence (FCS) field
– Ensures data at destination exactly matches data issued from source
– When source node transmits data, performs Cyclic Redundancy Check (CRC) to get
FCS
– Destination node’s Data Link layer services unscramble FCS via same CRC
algorithm
Data Link layer divided into two sub-layers:
– Logical Link Control
– Media Access Control
• NDIS works at this level
The Data Link Layer Demo
Ethernet Data Frame
IEEE 802 Data Link sub layers
LLC sublayer - Short for Logical Link
Control
•Provides a common interface to the
Network Layer, reliability and flow control
•Defines SAPs (Service Access Points)
MAC sublayer - Short for Media Access
Control
•Appends the physical address (MAC
address) to the frame and performs error
checking
•Communicates directly with the media
through the network interface card
•It converts the frames into bits and puts
them on the wire
•Defines IEEE LAN standards such as
802.3, 802.4, 802.5, and 802.11
Data Link Layer
A NIC’s MAC address contains two parts: a block ID and a
device ID. The block ID is a six-character sequence unique to
each vendor. The remaining six characters known as the device
ID are added at the factory, based on the NIC’s model and
manufacture date.
Physical Layer (1)
• Bottommost Layer Referred to as the “hardware layer”
• Hardware-oriented, establishes and maintains physical link
between communication computers
• Defines how the cable is attached to the NIC
• Packet sent as an unstructured raw bit stream over physical
medium
• Protocols accept frames from Data Link layer and generate
voltage to transmit signals
• When receiving data, protocols detect voltage and accept
signals
• Protocols also set data transmission rate and monitor data
error rates
– Cannot perform error correction
• Network administrators mostly concerned with bottom four
layers of OSI Model
The Physical Layer Demo
Applying the OSI Model
Communication Between Two Systems
Data transformation through the OSI Model
TCP/IP Compared to the OSI Model
Models Demo
TCP/IP and OSI Models Demo
The TCP/IP suite of protocols can be divided into four layers that roughly correspond
to the seven layers of the OSI Model.
■ Application layer —Roughly equivalent to the Application, Presentation, and
Session layers of the OSI Model. Applications gain access to the network
through this layer, via protocols such as the File Transfer Protocol (FTP),
Trivial File Transfer Protocol (TFTP), Hypertext Transfer Protocol (HTTP),
Simple Mail Transfer Protocol (SMTP), and Dynamic Host Configuration
Protocol (DHCP).
■ Transport layer —Roughly corresponds to the Transport layer of the OSI
Model. This layer holds the Transmission Control Protocol (TCP) and User
Datagram Protocol (UDP), which provide flow control, error checking, and
sequencing. All service requests use one of these protocols.
■ Internet layer —Equivalent to the Network layer of the OSI Model. This layer
holds the Internet Protocol (IP), Internet Control Message Protocol (ICMP),
Internet Group Message Protocol (IGMP), and Address Resolution Protocol
(ARP). These protocols handle message routing and host address resolution.
■ Network Interface layer —Roughly equivalent to the Data Link and Physical
layers of the OSI Model. This layer handles the formatting of data and transmission
to the network wire.
Layers at Which Network Components Operate
Device
Layer
Hubs
Physical
Switches
Data Link
Bridges
Data Link
Routers
Network
Network Interface
Data Link and
Card
Physical
Wireless Access Point Data Link
Frame Specifications
• The two major categories of frame types:
– Ethernet
• Four types of Ethernet frames
• Most popular form characterized by unique way in which
devices share a common transmission channel (described in
IEEE 802.3 standard)
– Token Ring: relies on direct links between nodes and a
ring topology
• Nodes pass around tokens (control frames that indicate to
network when a node is about to transmit data)
IEEE Networking Specifications
• Apply to connectivity, networking media,
error checking algorithms, encryption,
emerging technologies, and more
• Specifications fall under IEEE’s “Project
802”
– Effort to standardize physical and logical
elements of a network
IEEE Networking Specifications
Summary
• Standards are documented agreements containing
precise criteria that are used as guidelines to
ensure that materials, products, processes, and
services suit their purpose
• ISO’s OSI Model divides networking architecture
into seven layers
• Each OSI layer has its own set of functions and
interacts with the layers directly above and below
it
• Application layer protocols enable software to
negotiate their formatting, procedural, security,
and synchronization with the network
Summary (continued)
• Presentation layer protocols serve as translators
between the application and the network
• Session layer protocols coordinate and maintain
links between two devices for the duration of their
communication
• Transport layer protocols oversee end-to-end data
delivery
• Network layer protocols manage logical
addressing and determine routes based on
addressing, patterns of usage, and availability
Summary (continued)
• Data Link layer protocols organize data they
receive from the Network layer into frames that
contain error checking routines and can then be
transmitted by the Physical layer
• Physical layer protocols generate and detect
voltage to transmit and receive signals carrying
data over a network medium
• Data frames are small blocks of data with control,
addressing, and handling information attached to
them
The End