Download Laser Harp Digital instrument and Sound generation Adam Langoria Matthew Gann

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Ground (electricity) wikipedia, lookup

Buck converter wikipedia, lookup

Opto-isolator wikipedia, lookup

Alternating current wikipedia, lookup

Current source wikipedia, lookup

Ground loop (electricity) wikipedia, lookup

Electronic musical instrument wikipedia, lookup

Music technology (electronic and digital) wikipedia, lookup

Sound amplification by stimulated emission of radiation wikipedia, lookup

Transcript
Laser Harp
Digital instrument and Sound generation
Adam Langoria Matthew Gann
System Overview
• Laser Break Beam
Sensors
• R2R Digital to Analog
Converter
• Virtual Ground and
power amplification
Laser Break Beam Sensors
• Laser Transmitter
– 100Ω Current limiting
resistor
– Laser Diode
– Culminating lens
• Laser Receiver
– 10kΩ pull up resistor
– Active high design
– NPN photo transistors
R2R Digital Analog Converter
• R2R Resistor Network
– 20kΩ and 40kΩ values
– Single Inline Package
– 1% tolerance
Virtual Ground and Amplification
• Virtual Ground
– Low Pass Filter
• 10kΩ and 200μF
• .08 Hz Cut Off Frequency
• Follows the moving average
voltage
• Opamp to sink and source
current
• Amplification
– Opamp
• Unity Gain, gain of 1
• Used for isolation from R2R
network
• Can source and sink much
greater current
Laser Harp
Digital instrument and Sound generation
Adam Langoria Matthew Gann