Download Compilers and Interpreters

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Tandem Computers wikipedia , lookup

Asynchronous I/O wikipedia , lookup

Comment (computer programming) wikipedia , lookup

Transcript
Compilers and Interpreters
What's the difference?
• Computer programs are compiled or
interpreted. Languages like Assembly
Language, C, C++, Fortran, Pascal were
almost always compiled into machine
code. Languages like Basic,VbScript and
JavaScript were usually interpreted.
• So what is the difference between a
compiled program and an Interpreted
one?
Compiling
• To write a program takes these steps:
1.Edit the Program
2.Compile the program into Machine
code files.
3.Link the Machine code files into a
runnable program (also known as an
exe).
4.Debug or Run the Program
With some languages like Turbo
Pascal and Delphi steps 2 and 3 are
combined
• Machine code files are self-contained
modules of machine code that require
linking together to build the final program.
The reason for having separate machine
code files is efficiency; compilers only
have to recompile source code that have
changed. The machine code files from the
unchanged modules are reused. This is
known as Making the application. If you
wish to recompile and rebuild all source
code then that is known as a Build.
• Linking is a technically complicated
process where all the function calls
between different modules are
hooked together, memory locations
are allocated for variables and all the
code is laid out in memory, then
written to disk as a complete
program. This is often a slower step
than compiling as all the machine
code files must be read into memory
and linked together.
Interpreting
• The steps to run a program via an
interpreter are :
1. Edit the Program
2. Debug or Run the Program
3. This is a far faster process and it helps
novice programmers edit and test their
code quicker than using a compiler. The
disadvantage is that interpreted programs
run much slower than compiled programs.
As much as 5-10 times slower as every
line of code has to be re-read, then reprocessed.
Java and C#
• Both of these languages are semi-compiled. They
generate an intermediate code that is optimized
for interpretation. This intermediate language is
independant of the underlying hardware and this
makes it easier to port programs written in either
to other processors, so long as an interpreter has
been written for that hardware.
• Java when compiled produces bytecode that is
interpreted at runtime by a Java Virtual Machine
(JVM). Many JVMs use a Just-In-Time compiler
that converts bytecode to native machine code
and then runs that code to increases the
interpretation speed. In effect the Java source
code is compiled in a two-stage process.
What is a Compiler?
• A compiler is a program that translates human
readable source code into computer executable
machine code. To do this successfully the human
readable code must comply with the syntax rules
of whichever programming language it is written
in. The compiler is only a program and cannot fix
your programs for you. If you make a mistake,
you have to correct the syntax or it won't
compile.
• What happens When You Compile Code?:
• A compiler's complexity depends on the syntax of
the language and how much abstraction that
programming language provides. A C compiler is
much simpler than
• C++ Compiler or a C# Compiler.
Here is what happens when you compile code.
• Lexical Analysis:
This is the first process where the compiler reads a stream
of characters (usually from a source code file) and
generates a stream of lexical tokens. For example the C++
code
• Next is Syntactical Analysis:
This output from Lexical Analyzer goes to the Syntactical
Analyzer part of the compiler. This uses the rules of
grammar to decide whether the input is valid or not. Unless
variables A and B had been previously declared and were in
scope, the compiler might say
• 'A' : undeclared identifier.
• Had they been declared but not initialized. the compiler
would issue a warning
• local variable 'A' used without been initialized.
• You should never ignore compiler warnings. They can break
your code in weird and unexpected ways.
• Always fix compiler warnings!
One Pass Or Two?:
• Some languages have been written so that
a compiler can get away with reading the
source code once and generating the
machine code. Pascal is one such
language. Many compilers require at least
two passes. Why is this?
• Sometimes it is because of
- Forward Declarations of functions or
classes.
- How much optimization you require of
the compiler.
• Assuming that the compiler has successfully
completed these stages
- Lexical Analysis.
- Syntactical Analysis.
• The final stage is generating machine code. This
can be an extremely complicated process,
especially with modern CPUs.
• The speed of the compiled executable should be
as fast as possible and can vary enormously
according to
• The quality of the generated code.
• How much optimization has been requested.
• Most compilers let you specify the amount of
optimization. Typically none for debugging
(quicker compiles!) and full optimization for the
released code.
• Code Generation Is Challenging!:
• The compiler writer faces challenges when
writing a code generator. Many processors
speed up processing by using
• Instruction Pipelining.
• Internal caches.
• If all of the instructions within a loop can
be held in the CPU cache then that loop
will run much faster than if the CPU has to
fetch instructions from main RAM. The
CPU cache is a block of memory built into
the CPU chip that is accessed much faster
than data in the main RAM.
Caches And Queues:
• Most CPUs have a prefetch queue where the CPU
reads in instructions into the cache prior to
executing them. If a conditional branch happens
then the CPU has to reload the queue. So code
should be generated to minimize this.
• Many CPUs have separate parts for
- Integer Arithmetic
- Floating Point Arithmetic
• So these operations can often run in parallel to
increase the speed.
• Compilers typically generate code into object files
which are then linked together by a Linker
program.
An introduction to
Operating Systems
What is an Operating System?
• An Operating system is a software
that controls a computer. This is not
the same as the applications that
you create - those are usually only
run when you want them. An OS
runs almost as soon as the computer
is turned on.
• Windows is an Operating System, as
is Linux and the Apple Mac OS X.
• Switching On
-When a computer is powered up, the CPU starts running
immediately. But what does it run? On most PCs, whether
Linux, Windows or Mac, there is a boot program stored
permanently in the ROM of the PC.
• Booting Up
- Each PC motherboard manufacturer writes a
boot program for their motherboard.
- This boot program is not an Operating System (OS), it is
there to load the OS. Its first job is the Power On Start-Up
Test (aka POST). This is a system test, first checking the
memory and flagging any errors. It will stop the system if
something is wrong. Next it resets and initializes any
devices plugged into the PC. This should result in the OS
being loaded from whichever device has been configured as
the boot device, be it Flash RAM, CD-Rom or hard disk.
Having successfully loaded the OS, the boot program hands
over control and the OS takes charge.
Managing the computer
• The job of an OS is to manage all the resources
in a computer. When user input is received from
mouse and keyboard it has to be handled in a
timely fashion. When you create or copy a file,
the OS takes care of it all behind the scenes. It
may store a file in a hundred different places on
disk but it keeps you well away from that level of
detail. You'll just see one file entry in a directory
listing.
• An OS is just a very complex collection of
programs and nowadays takes hundreds or
thousands of man hours to develop. We've come
along way since Dos 6.22 which fitted on a 720
Kb floppy and Vista promises to be very large- 9
or 10 Gigabytes
Protection and Security
• Modern CPUs have all sorts of tricks built into
their hardware - for example CPUs only permit
trusted programs to run with access to all of the
hardware facilities. This provides extra safety.
• In Ring 0 protection on Intel/AMD CPUs, the code
at the heart of the OS, usually called the Kernel
code, is protected against corruption or
overwriting by non Kernel applications - the kind
you and I write. Nowadays it is rare for a user
written program to crash a computer. The CPU
will stop any attempt to overwrite Kernel Code
• Also, the CPU has several privileged
instructions that can only be run by Kernel
Code. This enhances the robustness of the
OS and reduces the number of fatal
crashes, such as the infamous Windows
Blue Screen of death.
• The language C was developed to write
Operating Systems code and it is still
popular in this role mainly for Linux and
Unix systems. The Kernel part of Linux is
written in C.
• The operating system is arguably the most
important piece of software on your PC.