Download Communications Point Data Base COOPER POWER SERIES for Communications Protocol 2179

Switchgear
Technical Data
TD280016EN
Effective July 2015
Supersedes R280-90-19 8/2012
COOPER POWER
SERIES
Communications Point Data Base
for Communications Protocol 2179
For use with Eaton’s Cooper Power series
Form 6 Recloser Control
Form 6 Cooper 2179 Device Profile Data Dictionary
Form 6 Cooper 2179 Map Points
July 9, 2015
v3.0
THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF EATON.
UNAUTHORIZED REPRODUCTION OR MODIFICATION IS PROHIBITED.
Document
1.00
1.01
1.02
1.03
2.00
3.00
2179 Point Sequence Range
2-Bit Status
Simple Bit Status
Pulse Accumulators
Analog Inputs
Special Calculations
Control Output
Date
5/8/2002
3/15/2004
7/26/2005
10/28/2005
8/24/2012
7/9/2015
Description
Initial release.
Added triple single basic scan and SBO definitions.
Changed the Analog Scale Factor for the Instantaneous Power Factors to 10000.
Minor edits in the Basic Scan, Status tab.
Updates and re-release for ProView 5.0
Updates and re-release for ProView 5.1
Minimum
0 (0x0)
48 (0x30)
64 (0x40)
128 (0x80)
0 (0x0)
0 (0x0)
Maximum
31 (0x1F)
63 (0x3F)
95 (0x5F)
255 (0xFF)
127 (0x7F)
255 (0xFF)
Page 1
Cover Page
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Binary Input Status
Description
Recloser Closed
Recloser Open
Control is Locked Out
Any Control or System Alarm
Above Minimum Trip
Supervisory Off
Non-Reclosing
Ground Trip Blocked
SEF Blocked
CLPU Blocked
Fast Trips Blocked
Profile Selected (Normal)
Profile Selected (Alt1)
Profile Selected (Alt2)
Profile Selected (Alt3)
Hot Line Tag
Bus Voltage Present (Phase A)
Bus Voltage Present (Phase B)
Bus Voltage Present (Phase C)
Reverse Power Flow
Battery Test in Progress
No AC Power
Battery Alarm
ci8:Alt1 (TB3:9-10)
ci9:Alt2 (TB3:11-12)
ci10:Alt3 (TB3:13-14)
ci11:Nrml (TB3:15-16)
co1:aux (TB1:11-12,13)
co2:ok (TB1:14-15)
co3:hlt (TB1:16-17)
co4:gtb (TB1:18-19)
ss1:lo (TB1:9-10)
co5:nr (TB3:17-18)
co6:alm (TB3:19-20,21)
co7:nrm (TB4:1-2)
co8:alt1 (TB4:3-4)
co9:alt2 (TB4:5-6)
co10:alt3 (TB4:7-8)
Register Bit ID
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
2-Bit Status
Sequence
Simple Status
Sequence
00
01
02
03
04
0 (0x0)
05
06
07
48(0x30)
08
09
10
11
12
1 (0x1)
13
14
15
00
01
02
03
04
2 (0x2)
05
06
07
49(0x31)
08
09
10
11
12
3 (0x3)
13
14
15
00
01
02
03
04
4 (0x4)
05
50(0x32)
Page 2
Basic Scan, Status
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Binary Input Status
Description
co11:frq (TB4:9-10)
co12:vlt (TB4:11-12,13)
Reclose Retry Enabled
A Phase Fault Trip
B Phase Fault Trip
C Phase Fault Trip
Ground Fault Trip
SEF Trip
ci1:RTrip (TB1:3-4)
ci2:SClose (TB1:5-6)
ci3:STrip (TB1:7-8)
ci4:GTB (TB3:1-2)
ci5:NRecl (TB3:3-4)
ci6:TargR (TB3:5-6)
ci7 (TB3:7-8)
Ground Overcurrent Alarm
Phase Overcurrent Alarm
Negative Sequence Overcurrent Alarm
Hot Line Tag On from Configurable Logic
Hot Line Tag On from Communications
Hot Line Tag On from Front Panel Switch
Control Circuit Interrupted
USEF Blocked
Profile Selected (Alt 4)
Profile Selected (Alt 5)
Not Used
Register Bit ID
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
4 (0x4)
2-Bit Status
Sequence
Simple Status
Sequence
06
07
50(0x32)
08
09
10
11
12
5 (0x5)
13
14
15
00
01
02
03
04
6 (0x6)
05
06
07
51(0x33)
08
09
10
11
12
7 (0x7)
13
14
15
Page 3
Basic Scan, Status
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Binary Input Status (Triple-Single)
Description
Recloser Closed (Phase A)
Recloser Open (Phase A)
Control is Locked Out (Phase A)
Any Control or System Alarm
Above Minimum Trip
Supervisory Off
Non-Reclosing
Ground Trip Blocked
SEF Blocked
CLPU Blocked
Fast Trips Blocked
Profile Selected (Normal)
Profile Selected (Alt1)
Profile Selected (Alt2)
Profile Selected (Alt3)
Hot Line Tag
Bus Voltage Present (Phase A)
Bus Voltage Present (Phase B)
Bus Voltage Present (Phase C)
Reverse Power Flow
Battery Test in Progress
No AC Power
Battery Alarm
ci8:Alt1 (TB3:9-10)
ci9:Alt2 (TB3:11-12)
ci10:Alt3 (TB3:13-14)
ci11:Nrml (TB3:15-16)
co1:aux (TB1:11-12,13)
co2:ok (TB1:14-15)
co3:hlt (TB1:16-17)
co4:gtb (TB1:18-19)
ss1:lo (TB1:9-10)
co5:nr (TB3:17-18)
co6:alm (TB3:19-20,21)
co7:nrm (TB4:1-2)
co8:alt1 (TB4:3-4)
co9:alt2 (TB4:5-6)
co10:alt3 (TB4:7-8)
Register Bit ID
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
2-Bit Status
Sequence
Simple Status
Sequence
00
01
02
03
04
0 (0x0)
05
06
07
48(0x30)
08
09
10
11
12
1 (0x1)
13
14
15
00
01
02
03
04
2 (0x2)
05
06
07
49(0x31)
08
09
10
11
12
3 (0x3)
13
14
15
00
01
02
03
04
4 (0x4)
05
50(0x32)
Page 4
Basic Scan, Status (TrplSingle)
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Binary Input Status (Triple-Single)
Description
co11:frq (TB4:9-10)
co12:vlt (TB4:11-12,13)
Reclose Retry Enabled
A Phase Fault Trip
B Phase Fault Trip
C Phase Fault Trip
Ground Fault Trip
SEF Trip
ci1:RTrip (TB1:3-4)
ci2:SClose (TB1:5-6)
ci3:STrip (TB1:7-8)
ci4:GTB (TB3:1-2)
ci5:NRecl (TB3:3-4)
ci6:TargR (TB3:5-6)
ci7 (TB3:7-8)
Ground Overcurrent Alarm
Phase A Overcurrent Alarm
Negative Sequence Overcurrent Alarm
Hot Line Tag On from Configurable Logic
Hot Line Tag On from Communications
Hot Line Tag On from Front Panel Switch
Control Circuit Interrupted (Phase A)
Recloser Closed (Phase B)
Recloser Open (Phase B)
Control is Locked Out (Phase B)
Control Circuit Interrupted (Phase B)
Recloser Closed (Phase C)
Recloser Open (Phase C)
Control is Locked Out (Phase C)
Control Circuit Interrupted (Phase C)
Phase B Overcurrent Alarm
Phase C Overcurrent Alarm
Ganged Mode
1-3 Mode
1-1 Mode
USEF Blocked
Profile Selected (Alt 4)
Profile Selected (Alt 5)
Not Used
Register Bit ID
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
4 (0x4)
2-Bit Status
Sequence
Simple Status
Sequence
06
07
50(0x32)
08
09
10
11
12
5 (0x5)
13
14
15
00
01
02
03
04
6 (0x6)
05
06
07
51(0x33)
08
09
10
11
12
7 (0x7)
13
14
15
00
01
02
03
04
8 (0x8)
05
06
07
52(0x34)
08
09
10
11
12
9 (0x9)
Page 5
Basic Scan, Status (TrplSingle)
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
52(0x34)
Binary Input Status (Triple-Single)
Description
Not Used
Not Used
Not Used
Register Bit ID
77
78
79
2-Bit Status
9 (0x9)
Sequence
Simple Status
Sequence
13
14
15
Page 6
Basic Scan, Status (TrplSingle)
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Counters
Description
Trip Counter (Phase A)
Trip Counter (Phase B)
Trip Counter (Phase C)
Trip Counter (Ground)
Trip Counter (SEF)
Total Trip Counter
Index
Sequence
00
01
02
03
04
05
64 (0x40)
65 (0x41)
66 (0x42)
67 (0x43)
68 (0x44)
69 (0x45)
Page 7
Basic Scan, Counters
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Counters (Triple-Single)
Description
Trip Counter (Phase A)
Trip Counter (Phase B)
Trip Counter (Phase C)
Trip Counter (Ground)
Trip Counter (SEF)
Total Trip Counter
Operations Counter (Phase A)
Operations Counter (Phase B)
Operations Counter (Phase C)
Index
Sequence
00
01
02
03
04
05
06
07
08
64 (0x40)
65 (0x41)
66 (0x42)
67 (0x43)
68 (0x44)
69 (0x45)
70 (0x46)
71 (0x47)
72 (0x48)
Page 8
Basic Scan, Counters (TS)
Form 6 Cooper 2179 Device Profile Data Dictionary
INPUT SUBSYSTEM
Analog Inputs
Index
Sequence
Scale
Factor
90% Full Scale Value (hardcoded to 29491)
Zero-Reference Value (hardcoded to 0)
00
01
128 (0x80)
129 (0x81)
1
1
A Phase Primary Current Magnitude
B Phase Primary Current Magnitude
C Phase Primary Current Magnitude
3I0 Primary Current Magnitude
02
03
04
05
130 (0x82)
131 (0x83)
132 (0x84)
133 (0x85)
10
10
10
10
Amps
Amps
Amps
Amps
A Phase Primary Voltage Magnitude
B Phase Primary Voltage Magnitude
C Phase Primary Voltage Magnitude
06
07
08
134 (0x86)
135 (0x87)
136 (0x88)
1
1
1
Volts
Volts
Volts
A Phase Power Factor
B Phase Power Factor
C Phase Power Factor
09
10
11
137 (0x89)
138 (0x8a)
139 (0x8b)
10000
10000
10000
A Phase Primary Apparent Power
B Phase Primary Apparent Power
C Phase Primary Apparent Power
12
13
14
140 (0x8c)
141 (0x8d)
142 (0x8e)
1
1
1
kVA
kVA
kVA
A Phase Primary Real Power
B Phase Primary Real Power
C Phase Primary Real Power
15
16
17
143 (0x8f)
144 (0x90)
145 (0x91)
1
1
1
kW
kW
kW
A Phase Primary Reactive Power
B Phase Primary Reactive Power
C Phase Primary Reactive Power
18
19
20
146 (0x92)
147 (0x93)
148 (0x94)
1
1
1
kvar
kvar
kvar
Line Frequency
21
149 (0x95)
100
Hz
A Phase Primary Demand Currents
B Phase Primary Demand Currents
C Phase Primary Demand Currents
22
23
24
150 (0x96)
151 (0x97)
152 (0x98)
10
10
10
Amps
Amps
Amps
Battery Voltage
Battery Current
25
26
153 (0x99)
154 (0x9a)
100
1000
Volts
Amps
Description
Units
Page 9
Basic Scan, Analogs
Form 6 Cooper 2179 Device Profile Data Dictionary
OUTPUT SUBSYSTEM
Select-Before-Operate Points
Description
* Close Mechanism
* Trip Mechanism
Block Reclosing
Block Ground Trip
Block SEF
Block CLPU
Block Fast Trips
* Profile - Normal
* Profile - Alt1
* Profile - Alt2
* Profile - Alt3
* Reset Targets
* Reset Demand Meters
* Reset Alarms
* Test Battery
* Hot Line Tag Set
* Hot Line Tag Reset
Enable Reclose Retry
Enable Sync Check
Block USEF
* Profile - Alt4
* Profile - Alt5
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
* Momentary/Self Resetting
Register Sequence
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
0 (0x0)
1 (0x1)
2 (0x2)
3 (0x3)
4 (0x4)
5 (0x5)
6 (0x6)
7 (0x7)
8 (0x8)
9 (0x9)
10 (0xA)
11 (0xB)
12 (0xC)
13 (0xD)
14 (0xE)
15 (0xF)
16 (0x10)
17 (0x11)
18 (0x12)
19 (0x13)
20 (0x14)
21 (0x15)
22 (0x16)
23 (0x17)
24 (0x18)
25 (0x19)
26 (0x1A
27 (0x1B)
28 (0x1C)
29 (0x1D)
30 (0x1E)
31 (0x1F)
Conditioned by
Supervisory State
(Factory Default)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Crosshatch
Page 10
indicates point is supervised regardless of setting
SBO
Form 6 Cooper 2179 Device Profile Data Dictionary
OUTPUT SUBSYSTEM
Select-Before-Operate Points (Triple-Single)
Description
* Close Mechanism (Phase A)
* Trip Mechanism (Phase A)
Block Reclosing
Block Ground Trip
Block SEF
Block CLPU
Block Fast Trips
* Profile - Normal
* Profile - Alt1
* Profile - Alt2
* Profile - Alt3
* Reset Targets
* Reset Demand Meters
* Reset Alarms
* Test Battery
* Hot Line Tag Set
* Hot Line Tag Reset
Enable Reclose Retry
Enable Sync Check
* Trip Mechanism (Phase B)
* Trip Mechanism (Phase C)
* Close Mechanism (Phase B)
* Close Mechanism (Phase C)
* Activate Ganged Mode
* Activate 1-3 Mode
* Activate 1-1 Mode
* Trip All Phases
* Close All Phases
Block USEF
* Profile - Alt4
* Profile - Alt5
Not Used
* Momentary/Self Resetting
Register Sequence
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
0 (0x0)
1 (0x1)
2 (0x2)
3 (0x3)
4 (0x4)
5 (0x5)
6 (0x6)
7 (0x7)
8 (0x8)
9 (0x9)
10 (0xA)
11 (0xB)
12 (0xC)
13 (0xD)
14 (0xE)
15 (0xF)
16 (0x10)
17 (0x11)
18 (0x12)
19 (0x13)
20 (0x14)
21 (0x15)
22 (0x16)
23 (0x17)
24 (0x18)
25 (0x19)
26 (0x1A)
27 (0x1B)
28 (0x1C)
29 (0x1D)
30 (0x1E)
31 (0x1F)
Conditioned by
Supervisory State
(Factory Default)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Crosshatch
Page 11
indicates point is supervised regardless of setting
SBO (Triple-Single)
Technical Data TD280016EN
Communications
Point Data Base

Effective July 2015
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Power Systems Division
2300 Badger Drive
Waukesha, WI 53188
United States
Eaton.com/cooperpowerseries
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. TD280016EN
July 2015
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
For Eaton's Cooper Power series Form 6
recloser control information
call 1-877-277-4636 or visit:
www.eaton.com/cooperpowerseries.