Download Visual Indicating Fuseholder HLD HLD-HH

Bussmann®
Visual Indicating Fuseholder
HLD
HLD-HH
For ⁄Ω¢∑ ≈ 1⁄Ω¢∑ (6.3mm ≈ 32mm) Pin Indicating Fuses
Dimensions - in (mm)
2.5" Max. (HLD)
(63.5mm Max.)
0.86"
(21.8mm)
Washer
0.69"
Catalog Symbol: HLD and HLD-HH
Visual Indicating Fuseholder
Ampere Rating: 15 Amperes
Voltage Rating: 250 Volts
Temperature Rating (RTI): 130°C
Agency Approvals:
U.L. Recognized, HLD Guide IZLT2, File E14853
Octagonal Sides
2.75" Max. (HLD-HH)
(69.9mm Max.)
0.505" ± 0.005”
(16.0mm ± 0.13mm)
0.473" ± 0.005”
(12.0mm ± 0.13mm)
Punched Mounting Hole
Electrical Ratings
Amps
Volts AC
HLD
15
250
Solder terminals
HLD-HH
15
250
⁄Ω¢∑ quick-connect terminals
Symbol
(17.5mm)
Features
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
General Information:
• For use with GBA and GLD fuses.
• Bayonet-type transparent knob permits visual indication of
“opened” pin indicating fuses.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled.This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information
contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
11-13-12
SB98107
Rev. A
Form No. HLD
Page 1 of 1
BIF Doc #2120