Download UltraConnect UC-372-ASG Security Communicators

UltraConnect UC-372-ASG
www.uhssystems.com
UltraConnect UC-372-ASG Security Communicators
TM
UltraConnect UC-372 ADSL Security Communicator is a high-end ADSL modem which supports the
transport of legacy security and fire alarm signalling over ADSL, IP and cellular networks. With an
extensive range of physical interfaces, powering and network transport options, UltraConnect Security
Communicators offer an unparalleled level of functionality and reliability for legacy terminal users seeking
to move their transport infrastructure to multi-path IP networks without replacing their existing burglar
alarm and fire alarm terminals. The equipment also supports a low cost video surveillance capability, with
access to live and recorded video from CCTV and IP cameras at the monitored premises.
Applications
UltraConnect Security Communicators are
designed for applications where there is a need to
transport messages from legacy alarm equipment
over IP wide area networks. Typical examples
include:

Fire alarm panels with relay or serial interfaces

Intrusion detection systems with digital dialers

Access control systems

Video alarm verification
Managed Dual-Paths Communications
UltraConnect Security Communicators support
transport over fully integrated IP/ADSL, Cellular
and/or PSTN paths. Deploy with a single or
multiple solution depending on the required cost
and reliability. Deploy dual path, e.g. ADSL and
cellular where network availability is critical.
Further, the communications paths are fully
managed by the UltraAgent network server,
ensuring rapid fault detection and restoration.
Compatible With Installed Equipment
All-in-one Box
Typical alarm monitoring network comprise alarm
panels or other devices with low speed interfaces
connected to private circuits, point-to-point radio
networks or the PSTN.
UltraConnect Security Communicators implement
dedicated serial data, VF, PIN and other interfaces
in order to connect directly to the terminal
equipment. This means there is no need to
replace or modify the existing terminal equipment.
UltraConnect UC-372-ASG
Just add the UltraConnect and migrate the
application to broadband and/or cellular networks.
ed01
No need to cobble together a solution consisting of
IP panel interface + ADSL modem + cellular
modem + custom controller + battery.
UltraConnect Security Communicators are highly
integrated and provide all these features in a
single, convenient, managed and secure box.

UC-372 uses ADSL & PSTN

UC-372G uses ADSL/GPRS & PSTN
Copyright UHS Systems Pty Ltd 2007
All rights reserved.
UltraConnect UC-372-ASG
www.uhssystems.com
Specification Sheet
ADSL (WAN) Interface

ADSL/ADSL2/ADSL2+ compliant to:
o ANSI T1.413, Issue 2
o ITU G.992.1 (G.dmt)
o ITU G.992.2 (G.Lite)

Central ADSL splitter compliant to:
o ANSI
o ETSI TR 101 728
Alarm System Interfaces

VF Dialler Capture supporting most
popular alarm Formats:
o SIA1, 2 and 3
o ContactID
o Ademco Fast
o 4+1 / 4+2

TTL/RS-232 ASIAL serial protocol

VF modem – V.21, V.22, V.22bis
o Used for alarm panel download
over IP and cellular networks

8 General Purpose Sensor/Alarm Inputs

2 General Purpose Remotely Controlled
Relay Outputs

Ethernet
Cellular Backup (G, X, 3G Model)

Cellular path carries security messages
concurrently with ADSL path

Continuous receive power monitoring and
reporting

Equipment versions supporting:
o GPRS
o CDMA-1xRTT/eVDO 850 MHz
o 3G HSDPA & HSUPA
Router / Firewall Functions

RFC1483 multiprotocol encapsulation over
ATM (LLC-SNAP and VCMUX supported)

16 PVCs supported

PAP, CHAP, MSCHAP authentication

PPP terminated for cellular (-G/X models)

Least cost routing selects wireline over
wireless interface by default

10/100BaseT Ethernet interface – Auto
MDIX

Stateful packet inspection firewall

Optional NAT / PAT / IP Forwarding
configurable

DHCP Server

DHCP Client (Dynamic IP address)

Static IP
Message Encryption

3DES

AES256 (planned)
UltraConnect UC-372-ASG
Management Features

Simple to install and configure – configure
using touch-tone phone

LAN side browser based management

Network management over ADSL and/or
cellular interfaces from UltraAgent server
(hosted by service provider)

Management system alarms for comms,
power & interface failures

Remote software download

Remote testing, polling, status and
configuration

Zero-touch activation allows
preconfiguration in server and automatic
download to site at installation, eliminating
complex on-site configuration.
Enclosure Options

Secure wall mounted enclosure according
to Australian Standard AS2201.5-1992

Box and wall mounting tamper detection
and reporting

Cellular antenna mounting supported

Enclosure dimensions: 310mm (W) x
319mm (H) x 75mm (D)
Copyright UHS Systems Pty Ltd 2007
All rights reserved.
UltraConnect UC-372-ASG
www.uhssystems.com
Environmental
Advanced Video Surveillance

-5 C to 50 C operation

95% Humidity
o
o
Power Supply Options

Security industry standard 240V/16VAC
plugpack

>8 hour battery back-up with advanced
battery management system including:
o
Rapid, temperature compensated
charging
o
Periodic and remote controlled testing
o
Battery disconnect with battery low
voltage alarm
o
Both 7 AH and 11 AH VRLA batteries
supported

Alarms for AC loss and battery fail
Remote Access


Access to remote alarm panel
programming via CMS controlled PSTN
fallback
Supports remote configuration and
download of panel data over IP and
cellular networks using PSTN emulation

Support for up to 8 standard security industry
coax surveillance cameras via external video
capture devices (UltraCapture2,
UltraCapture4, UltraCapture8)

Users can select camera and view video
frames on-site or remotely via secure
UltraVideo server using standard web
TM
browser or Java -enabled mobile

Event-based video recording – twenty 60
second video clips stored (+30 Seconds
around the trigger event)
o
Recording triggered from alarm events
sent by alarm system

Remote Pan-Tilt-Zoom camera control
Certification

A-Tick, C-Tick

IP1149

AS2201.5:1992
Further Enquiries
UHS Systems
Ph: +61 2 9663 2299
Fx: +61 2 9663 2288
www.uhssystems.com
PSTN Back-up
 Phone line monitoring and reporting
 Automatic Mode3 fallback to the PSTN
supported
UltraConnect UC-372-ASG
UltraConnect UC-372-ASG
Copyright UHS Systems Pty Ltd 2007
All rights reserved.