Download CENTRALE OPERATIVA_inglese

SCO-2912.12765,-
OPERATIONS CENTRE
SICEP S.p.A. - 50052 Certaldo (Firenze) - Via Calabria, 14
Tel. 0571 664166 r.a. - Fax 0571 652285 - Internet: www.sicep.it - e-mail: [email protected]
MvsNET
NEW MANAGEMENT SYSTEM
Mvs-NET
Dall’esperienza acquisita e consolidata del sistema DATA 9000 MVS è nata l’evoluzione MvsNET, Centrale Operativa in grado di accrescere
le funzionalità e potenzialità del sistema gestionale. Il Sistema MvsNET è stato completamente riprogettato, con un’architettura hardware
e software ideata per creare un sistema gestionale dalle elevate prestazioni, mantenendo ed incrementando i principi di multivettorialità,
polifunzionalità e modularità.
The experience acquired and consolidated with the MVS DATA 9000 system has led to the development of MvsNET,
an Operations Centre for expanding the functions and potential of the management system. The MvsNET system has
been completely redesigned, with a hardware and software architecture designed to create a management system
with the highest performance, maintaining and increasing the principles of multivectoriality, polifunctionality and modularity.
Structure of
the MvsNET System
Fully Redesigned
User Interface
The MvsNET System consists of a PC server
with a Linux operating system and one or more
client PCs with Microsoft Windows operating
systems. The server (mod. NET-SERVER)
guarantees greater management stability and
reliability, letting the operators access the system
only through clients. To become MvsNET Client
no particular characteristics or configurations
are necessary as the MvsNET licences are the
“float” type, in other words they allow enabling
on the basis of the number of connections and
not the type of machines connected. In the
hypothesis of a fault on a Client PC, this
architecture makes it simple to replace the
same and temporarily use another computer.
The management of the licences is the
centralised type; the central server is always
the control engine, which on the basis of the
licences available, enables the various clients
connected. Fur thermore, the native
Client/Server architecture gives you the highest
performance in all conditions on LAN and WAN
infrastructures (local and geographical networks).
The new interface can be adapted to meet
various requirements, as it is simple and easy
to use, making the software very user-friendly
to read and use. The new video resolution not
only lets you have more information available at
the same time, but also lets you organise it in
a better way, making it easier to read and
manage each event.
Custom Service Files
The MvsNET System lets you create custom
service files on the basis of your operational
requirements; the operator can set the title of
the file, choose an icon from those available
and define up to a maximum of 10 search fields.
Printing and Search
Filters have been Enhanced
The structure of the MvsNET System events
historics can manage 1,000,000 events per
month. You can run searches without any
particular limits on reports in a period of 12
months. Furthermore, there is an instrument
available to quickly display the reports of a
peripheral device in the last 30 days.
The new search and filter mechanisms, combined
with the custom print modules, let you display
all of the useful and available information.
Full Tele-management
Hardware Configuration
Online Help
All the aspects of communication with the new
multiprotocol concentrators are run and
managed directly by the central server. This
allows the continuous monitoring of the current
activity, providing all the information possible on
the state of progress of the requested operations
for the concentrators.
Particular care has been taken to make the
software as simple and intuitive as possible.
The MvsNET System offers “online help” to
quickly solve any doubts you may have on how
to use the program. The help page shows the
operations available, at the same time as the
page the operator has opened, with tips on how
to fill in the fields on the screen, the meaning
of the same and the allowed values.
The MvsNET System can be completely managed
and tele-managed from remote stations,
connected through the network or phones using
a modem.
MvsNET SOFTWARE LICENCES
NUOVO SISTEMA GESTIONALE
• Maintaining the principles
of multivectoriality,
polifunctionality,
and modularity
NET-SERVER
TRASMETTITORI
• Native Client/Server
architecture with
Linux operating system
MvsNET basic package.
Includes all the applications and the BASE server (mod. NET-SERVER)
unit for the management of integrated services in the security sector:
•
Manages the archives, tickets, alarm services and events historics.
•
Enables the following communication carriers:
The SICEP MVS high-speed radio protocol on the multiprotocol concentrator,
mod. SD-MPR, the phone protocols, GSM and GPRS (with the suitable
interface, mod. SD-IFC).
•
You can identify the geographical location of any user in the archive, after
the suitable positioning on vectorial cartography (see NET-VECTOR.IT).
•
Allows the manual or automatic transmission of coded text messages
using the MVS protocol or on a GSM network with the “Short Message”
service.
•
By acquiring planimetry it can indicate the exact location of the
anti-intrusion devices installed.
•
Enables the system for the remote programming of the peripheral devices
with SICEP MVS protocol.
•
By installing 2 NET-BASE licences, the system can realise and configure
a BACK-UP server, constantly kept up-to-date.
•
Allows connection to 1 WS-CLIENT server.
•
Makes the system available for tele-management from remote stations;
with a suitable tele-assistance contract you can monitor, check and update
the MvsNET System.
• System suitable for full
tele-management with remote control
• 1,000,000 events per month
effectively managed
• New hardware architecture
with high performance
• Management
structure enriched
by a series of integrated
and optional services
MvsNET SOFTWARE LICENCES
NET-VISION
NET-VECTOR.IT
NET-TELSI
MvsNET application software for videosurveillance. The system can receive images in
the event of an alarm in Full-Screen, Quad or
Octal mode, carry out manual or automatic
interrogations at pre-established times and view
the films recorded on the Hard Disk.
The NET-VISION software has advanced
instruments for the reception and management
of the video peripheral devices, multiple displaying
of the cameras, easy navigation and exporting
the images. As well as for displaying this
application, it lets you acquire the audio coming
from the video peripheral devices equipped with
the relevant interface.
The NET-VISION application uses switched phone
lines, digital ISDN, TCP/IP (also ADSL) and GSM
networks as communications carriers.
Vectorial cartography with the largest urban
and suburban centres in Italy. Supplied complete
with toponymy, green areas, squares,
hydrography (rivers and lakes). Using the relevant
search fields you can quickly find a town or city
and a particular square or road. Thanks to this
new cartographic search engine, the NET-BASE
management software lets you locate and identify
the geographical position of any user in the
archive.
Considering the possible evolutions regarding
territorial coverage, in order to maintain a
perfectly up-to-date cartography, the NET-VECTOR
application software needs to be updated
annually.
MvsNET application software for the
management of the telehelp service. Using the
appropriate personal data sheets with all of the
medical and anamnestic data of the clients lets
you perform an optimal telehelp service.
NET-GPS
MvsNET application software for the satellite
localisation service. This system lets you check
any moving vehicle with the GPS (Global
Positioning System) satellite localisation network.
You can protect and control all the vehicles
connected to the system against theft, attempted
robbery, aggression, etc. It also provides logistical
information, including checking the position, the
routes taken, the times and the speed of
movement. The system has been optimised
thanks to the use of more precise and detailed
vectorial-type cartography. The position of the
vehicle can be displayed when an alarm signal
is transmitted by the same vehicle, or on the
request of the Operations Centre. You can also
set the preset routes to receive reports when
the vehicles do not respect the set limits. The
NET-GPS lets you display the fleet of vehicles
present in the archive in real time, notably
simplifying the activity of the operator in the
Operations Centre. The NET-GPS application
uses SICEP MVS high-speed radio protocol,
GSM and GPRS as communication carriers.
NET-TECNO
MvsNET application software for the
management of technological plants. This lets
you manage logic signals or analog values using
the relevant service board, with alarm thresholds
that can be configured.
NET-CLIENT
(1/3/5/10 WS-CLIENT)
MvsNET licence for enabling Client stations. It
is possible to connect 1 or more operator
stations to the server in relation to the number
of chosen connections (1, 3, 5, 10 WS-CLIENT).
The NET-CLIENT licences are the centralised
type; the centre server is always the control
engine, which on the basis of the licences
available, enables the various PCs connected.
In the hypothesis of a fault on a Client PC, this
architecture makes it simple to replace the
same and temporarily use another computer.
NET-RADIOB
MvsNET software licence for enabling the
management of the SICEP Low-Speed radio
protocol on the multiprotocol concentrator, mod.
SD-MPR.
NET-RADIOC
MvsNET software licence for enabling the
management of the Compatible radio protocols
on the multiprotocol concentrator, mod. SDMPR.
MvsNET MANAGEMENT SYSTEM
PCA-GS
WS-CLIENT
Autonomous Emergency Uninterruptible Power Supply
Network Workstation for the MvsNET System
Compact, 1500 VA, uninterruptible power supply, able to guarantee an autonomy
of up to 30 minutes depending on the load.
MvsNET network workstation. In reference to the number of Client licences
enabled, it is possible to connect 1 or more operator stations to the central
server in relation to the chosen connections (1, 3, 5, 10 NET-CLIENT). The
unit is supplied with a Pentium 4 CPU, 256 Mb of Ram, a Hard Disk with a
minimum of 60 Gb, CD writer, VGA video card, 10/100 Mbps network, LCD
TFT 15” monitor, Windows 2000 Professional operating system, keyboard
and mouse.
The NET-CLIENT licences are the centralised type; the Central Server is the
control engine, which on the basis of the licences available, enables the various
Workstations (mod. WS-CLIENT) connected.
NET-SERVER
Management Server Unit for MvsNET System
Supervisor SERVER unit for the management of integrated services in the
security sector complete with MvsNET Management package. It has a controller
system for 2 Hard Disks with a minimum of 60 Gb in RAID 1 configuration,
2 redundant power supplies with Hot-Swap technology and a Linux operating
system.
The unit is supplied in an industrial case, with a Pentium 4 CPU, 256 Mb of
Ram, a double Hard Disk with a minimum of 60 Gb, 2 redundant power
supplies, Floppy Disk, CD writer, serial multiport card, VGA video card, 10/100
Mbps network and Linux operating system.
This configuration allows automatic mirroring of the data on both hard disks,
monitoring of the Hard Disks and the continuous control of the temperature.
The disks are permanently controlled by the installed software.
CONCENTRATION UNIT
SM-A
SD-CT
Low-Tension Power Supply
Standard Phone Concentration Unit with
8 Lines
Highly reliable, 13.8 VDC autonomous power
supply producing a constant current of 12.5 A.
Installed in a Rack of 3 units, it lets you supply
power at 12 VDC to the radio or phone
concentration units and any other accessories.
The device has two dials on the front panel for
monitoring the output voltage and the current
absorbed.
You can deactivate all of the outputs with an
emergency key. The unit comes with a 20 Ah
battery to power the central unit even in a
blackout.
Concentration and standard phone signals
processing unit with 8 lines: lets you receive
the signals transmitted by the digital phone
controllers and the alarm centres on a switched
PSTN line. Ready to manage 2 lines at the same
time, it can be expanded up to a maximum of
8 lines with additional boards, Mod. DT-MF2.
The unit lets you display all of the signals received
on the display on the front panel, or the SM-TV
monitors. A printer can be connected to the
concentrator to print records of the event on
paper. The device also has software for
controlling the survival of the phone transmitters.
The unit is realised in a 19" Rack with 3 units.
SM-RTM
SD-T2
Phone Transceiver Radio Unit
Standard Phone Receiver with 2 Lines
Operations Centre transceiver radio unit. This
unit consists of a 19" RACK with 3 units for a
vehicular radio in the various versions (VHF or
UHF), a LED front panel for monitoring the
activity and the relevant interface for connecting
other concentrators. The power supply is
guaranteed by an internal 4.5 A, 13.8 VDC
power supply for connecting the emergency
battery, Mod. AE-24.
The unit is supplied programmed, complete with
service microphone and loudspeaker, for phone
connections with the patrols.
Standard phone receiver with 2 lines managed
by microprocessor. Using the normal phone
lines, this device makes it possible to receive
the signals transmitted by the digital phone
controllers and by the alarm centres that use
the most common communication protocols.
The line can be expanded by installing a cascade
connection of other receivers, Mod. SD-T2, up
to a maximum of 254 phone lines.
The 32 kbyte internal memory can store roughly
1300 events. It continuously checks if the line
has been cut at zero cost.
There are Leds on the front panel to inform the
operator on the current state of the unit: lines
occupied, modem transmission-reception, etc.
SD-MPR
Multiprotocol Radio Concentrator
for MvsNET System
Multiprotocol radio concentrator for managing
and using the following radio protocols, after
enabling NET-RADIO:
• High-speed Sicep MVS (NET-SERVER)
• Low-speed Sicep (requires NET-RADIOB
licence)
• Compatible (requires NET-RADIOC licence)
To operate it must be connected directly with
the external radio case, mod. SM-RT. The
connection to the MvsNET server is done through
an Ethernet LAN; this has made it possible to
improve and simplify the data exchange between
the concentration unit and the management
server.
The SD-MPR concentrator is installed in a Rack
with 2 units; on the front panel there are some
instruments for continuously monitoring the
operation of the device:
• Reading of the deviation of the input signal
(reception)
• Quality of the signal received, on a scale from
0 to 10
• Power supply: 230 VAC, 12 VDC, 5 VDC
• LAN network connection and activity on the
IEEE485 internal bus
• Enabling of the single protocol
• Activity of the single protocol
• Transmission/reception state
• Audio monitoring of the signal
received/transmitted through a loudspeaker
(can be deactivated)
All the operating parameters of the multiprotocol
concentrator can be configured directly by the
MvsNET system.
The unit is installed in a 19" Rack with 1 unit and
is supplied complete with:
• front led panel
• port for connection with management unit
• port for cascade connection with other
SD-T2 units
• 32 kbyte events memory buffer
• cut line control.
CONCENTRATION UNIT
FITTINGS
MB-WS12
Linear 1240 mm bench
Worktop consisting of a 1240-mm linear desk.
Die-cast and welded sheet-steel frame complete with cable raceway
with rear panel. Worktop, 30-mm thickness, made of chipboard,
covered on two sides with high-resistance, melamine anti-reflection
laminate, edges with grey PVC profile.
Supplied complete with adjustable feet and wheels.
Dimensions L1245xD900xH740 mm.
KCG.29
MOD-TE.08
Data Modem for GSM/GPRS Network
Phone Modem for ISDN Line
Modem for using the GSM or GPRS cellphone
network for receiving data and alarms. The kit
includes a GSM/GPRS Dual band cellphone
module and the cables necessary for the
installation. It requires a suitable data interface,
mod. SD-IFC, a magnetic 900/1800 MHz
antenna (Mod. AN-G9/18) and a SIM Card with
a data contract.
ISDN external phone modem with ONE SERIAL
to use with the NET-VISION licence. Makes it
possible to receive high-speed video images
using a 64 Kbyte or 128 Kbyte ISDN channel.
Supplied complete with power supply, RS-232
serial cable and connection for NT1.
MB-WS18
Linear bench 1800 mm
Worktop consisting of a 1800-mm linear desk. Die-cast and welded
sheet-steel frame complete with cable raceway with rear panel.
Worktop, 30-mm thickness, made of chipboard, covered on two sides
with high-resistance, melamine anti-reflection laminate, edges with
grey PVC profile.
Supplied complete with adjustable feet and wheels.
Dimensions L1800xD900xH740 mm.
MB-AN45
45° angle
45° angle for the realisation of angular configurations. Complete with
cable raceway. Worktop, 30-mm thickness, made of chipboard, covered
on two sides with high-resistance, melamine anti-reflection laminate,
edges with grey PVC profile.
MB-AN90
SD-IFC
MOD-TE.15
Radio Interface for Phone Lines
Phone Modem for Analog Line
Necessary for receiving data and alarms directly
from the MvsNET management system, coming
from GSM and GPRS modems, mod. KCG.29.
Requires a 12 VDC power supply.
External analog phone modem to use with the
NET-VISION licence. Makes it possible to receive
video images through normal switched phone
lines . It can also be used on ARC-8-series
peripheral devices. Complete with power supply
and RS-232 serial cable.
90° angle
90° angle for the realisation of angular configurations. Complete with
cable raceway. Worktop, 30-mm thickness, made of chipboard, covered
on two sides with high-resistance, melamine anti-reflection laminate,
edges with grey PVC profile.
MB-AR13U
13-unit rack cabinet
13-unit rack cabinet for fitting under desk. The cabinet lets you house
some racks near the desk.
Supplied on wheels, complete with front glass door and rear door.
MB-AR36U
36-unit rack cabinet
36-unit rack cabinet for fitting beside desk. The structure consists of
a base, a cover and two load-bearing frames, with 19” rack uprights,
rear and side panels for fixing to tables and for passing cables. With
slots for natural ventilation, made of die-cast and welded sheet steel.
Supplied on wheels, complete with front glass door and rear door.
MB-MO
Uprights
Pair of uprights for realising shelving that can be integrated with the
linear worktops in the MB-WS series. Available in the following heights:
H495 mm; H760 mm; H1030 mm.
MB-ME
Shelf
Shelf for realising shelving that can be integrated with the linear
worktops in the MB-WS series. To install you will require the uprights,
mod. MB-MO.
Available in the following sizes: L1008 mm; L1565 mm.
MB-CA
Chest of drawers
Chest of drawers for positioning under the desk with 3 or 4 drawers
comprising 3 units.
Supplied complete with wheels, rear door and 3 or 4 drawers,
depending on the model.