Download October 4 (Saturday)

The 64st General Session of the Japanese Society for Dental Materials and Devices (JSDMD)
October 4 (Saturday) - 5 (Sunday), 2014
▪ ASTER PLAZA
4-17 Kako-machi, Naka-ku, Hiroshima 730-0812, Japan
October 4 (Saturday)
▪ Hall A
9:25 - 9:30 Opening Remark
9:30 - 11:15 General Presentation (Oral Session)
A - 1 Improvement of mechanical properties of Co-Cr-Mo alloy through nano-structural control
using a giant straining process
○Murat Isik1, Mitsuo Niinomi1, Ken Cho1, Masaaki Nakai1, Zenji Horita2
1
Tohoku University, 2Kyusyu University
A - 2 Microstructure and mechanical properties of nitrogen added Co-Cr-Mo-W alloys for dental casting
alloys
○Naoyuki Nomura1, Hisashi Doi2, Yalatu Su1, Yusuke Tsutsumi2, Takao Hanawa2
1
Tohoku University, 2Tokyo Medical and Dental University,
A - 3 Microstructures and mechanical properties of low-cost Ti-Mn alloys produced by metal injection molding
○Ken Cho1, Mitsuo Niinomi1, Masaaki Nakai1, F. Pedro Santos1, Yoshinori Itoh2, Masahiko Ikeda3
1
Tohoku University, 2Industrial Research Institute of Shizuoka Prefecture, 3Kansai University
A - 4 Strengthening of Ti-6Al-7Nb alloy for narrow implants
○Maki Ashida1, Hisashi Doi1, Yusuke Tsutsumi1, Takao Hanawa1, Zenji Horita2,3
1
Tokyo Medical and Dental University, 2Kyushu University, 3WPI-I2CNER
A - 5 Surface analysis of titanium corroded in sulfide-containing solution
○Shinji Takemoto, Rino Harada, Tomoko Someya, Kensuke Tanaka,
Hiromichi Ichikawa, Tetsuya Aichi, Yutaka Oda, Eiji Kawada
Tokyo Dental College
A - 6 Investigation of metal allergy of Ti; Evaluation of Ti-ion solution prepared by accelerated corrosion environment
○Hiroyuki Okamoto, Yusuke Tsutsumi, Maki Ashida, Hisashi Doi,
Hiroyuki Miura, Mitsuaki Matsumura, Takao Hanawa
Tokyo Medical and Dental University
A - 7 Preparation of metal ion solution for novel patch testing reagent of metal allergy
○Yusuke Tsutsumi, Maki Ashida, Hisashi Doi, Takao Hanawa
Tokyo Medical and Dental University
▪ Hall A
13:15 - 14:15 Special Lecture 1
What is expected of the Society for Dental Materials and Devices
toward the implementation of evidence-based dentistry?
Hidemi Kurihara
Hiroshima University
▪ Hall A
15:00 - 17:00 General Presentation (Oral Session)
A - 8 Specfic binding of bone-associated cytokines to surface-modifeid titanium
○Masao Yoshinari, Shinji Takemoto, Hideaki Kinoshita, Koji Hasegawa, Toshio Igarashi, Eiji Kawada
Tokyo Dental College
A - 9 Evaluation of biofilm formation in the presence of saliva on poly(ethylene glycol)-deposited titanium
○Ayako Kawabe, Yusuke Tsutsumi, Takao Hanawa
Tokyo Medical and Dental University
A-10 Development of specialized culture substrate for mesenchymal stem cells
–Study about self-assembled monolayers and serum-free medium –
○Isao Hirata, Veronica Sainik Ronald, Masami Kanawa, Yukio Kato, Koichi Kato
Hiroshima University
A-11 Development of cell culture device to prevent oxygen deprivation of cellular aggregates
○Takahisa Anada, Takuo Kamoya, Teruko Yamamoto, Osamu Suzuki
Tohoku University
A-12 Inorganic polyphosphate is changed surface property of HA plate and
induced osteoblast differentiation
○Koji Morita, Kazuya Doi, Yohei Okazaki, Takayasu Kubo, Isao Hirata, Koichi Kato, Kazuhiro Tsuga
Hiroshima University
A-13 Evaluation of ion-release behavior for the strontium introduced calcium phosphate cemente
○Kazumitsu Sekine, Fumiaki Kawano, Kenichi Hamada
The University of Tokushima
A-14 Mechanical and biological performance of glass ionomer cement modified by bioactive glass nanoparticles
○Ahmad Rashad1, Tetsuro Odatsu1, Koichi Udoh2, Takanobu Shiraishi1, Takashi Sawase1, Ikuya Watanabe1
1
Nagasaki University, 2Yamaguchi University
A-15 In vitro evaluation of tricalcium phosphate cement using α-β phase transition
○Takaaki Arahira, Michito Maruta, Shigeki Matsuya
Fukuoka Dental College
October 4 (Saturday)
▪ Hall B
9:30 - 16:30 General Presentation (Poster Session)
[Award Challenge Posters P - 1 - P - 4]
(Odd numbers: 11:15 - 12:00, Even numbers: 14:15 - 15:00 Discussion)
P - 1 Composition dependence of magnetic susceptibility of binary Au alloy for biomedical application
○Shihoko Inui, Emi Uyama, Kenichi Hamada
The University of Tokushima
P - 2 Reaction of cells against oxide powder as radiopacifier in mineral trioxide aggregate
○Hirokazu Toshima1, Masayuki Kaga1, Takahiro Kato2, Teruo Anraku2, Futami Nagano-Takebe1, Kazuhiko Endo1
1
Health Sciences Univ. of Hokkaido, 2Yamamoto Precious Metal Co., Ltd.
P - 3 Finite element simulation of orthodontic tooth movement by using individual dentition model
○Jun Kawamura1, Yukio Kojima2, Hisao Fukui1
1
Aichi Gakuin University, 2Nagoya Institute of Technology
P - 4 Fabrication of calcite block derived from calcium hydroxide compact －Effect of treatment condition－
○Noriko Koga, Kanji Tsuru, Riki Toita, Ichiro Takahashi, Kunio Ishikawa
Kyushu University
P - 5 Brain-derived neurotrophic factor / hyaluronic acid complex enhances periodontal tissue regeneration
○Katsuhiro Takeda, Akihiro Konishi, Mikihito Kajiya, Shinji Matsuda,
Tsuyoshi Fujita, Hideki Shiba, Hidemi Kurihara
Hiroshima University
P - 6 Estimation of trace metal elements containing oral mucosa specimens using quantum beams
○Tomoko Sugiyama1, Takahiro Wada2, Toshio Hongo2, Motohiro Uo2
1
Jichi Medical Univ., 2Tokyo Medical and Dental Univ.
P - 7 Application of super soft elastomer to face guard cushioning material
○Takahiro Wada, Hiroshi Churei, Toshiaki Ueno, Toshio Hongo, Motohiro Uo
Tokyo Medical and Dental University
P - 8 Mechanical properties of orthodontic wires made by super engineering plastic
-Part 2 Durability in oral environment○Minami Maekawa, Takahiro Wada, Toshio Hongo, Motohiro Uo
Tokyo Medical and Dental University
P - 9 Color stability of glass fiber-reinforced plastic (GFRP) orthodontic wires
○Toshihiro Inami, Yasuhiro Tanimoto, Naomi Minami, Manamu Nagakura,
Masaru Yamaguchi, Norihiro Nishiyama, Kazutaka Kasai
Nihon University at Matsudo
P-10 Biological evaluation of glass fiber-reinforced plastic orthodontics wires
○Naomi Minami, Yasuhiro Tanimoto, Toshihiro Inami, Manamu Nagakura,
Masaru Yamaguchi, Norihiro Nishiyama, Kazutaka Kasai
Nihon University at Matsudo
P-11 Comparison of the orthodontic force applied to each tooth by different archforms of Nickel-Titanium alloy
rectangular archwire
○Naomi Saze1, Souichiro Oda1, Keisuke Tochigi1, Kazuhito Arai1, Kunihiko Otsubo2, Taira Miyasaka1
1
Nippon Dental University, 2Otsubo Orthodontic Clinic
P-12 Biological evaluation of PGA/HA composite for an orthodontic anchoring screw
○Eriko Yao, Masaru Yamaguchi, Yasuhiro Tanimoto, Momoko Takahashi, Kazutaka Kasai
Nihon University at Matsudo
P-13 Surface modification of resin by plasma irradiation at atmospheric pressure
○Chika Iwasaki, Ken Miyazawa, Masaki Asakura, Yuki Hata,
Tatsushi Kawai, Shigemi Goto
Aichi Gakuin University
P-14 Comparison of ratio to the changes in orthodontic force between Nickel-Titanium and Cupper-Nickel-Titanium
archwires in different tooth displacement
○Keisuke Tochigi1, Souichiro Oda1, Naomi Saze1, Kazuhito Arai1, Kunihiko Otsubo2, Taira Miyasaka1
1
Nippon Dental University, 2Otsubo Orthodontic Clinic
P-15 Evaluation of the dentin permeability inhibition effect by lap-strake method of
the amorphous calcium phosphate sheet
○Arata Isai1, Ei Yamamoto1, Nobuhiro Kato1, Hiroaki Nishikawa1,
Kenzou Yasuo2, Yoshiya Hashimoto2, Kazushi Yashikawa2, Kazuyo Yamamoto2, Sigeki Hontsu1
1
Kinki University, 2Osaka Dental University
P-16 Preparation and evaluation of ultra thin potassium-doped hydroxyapatite sheet
○Yuka Hatoko1, Ei Yamamoto1, Nobuhiro Kato1, Hiroaki Nishikawa1, Kazushi Yoshikawa2,
Tsutomu Furuzono1, Kazuyo Yamamoto2, Shigeki Hontsu1
1
Kinki University, 2Osaka Dental University
P-17 Inhibitory/protective effect of a fluoroaluminocalciumsilicate-based tooth coating material
on the tooth surface demineralization induced by acidic soft drinks
○Linlin Han, Takashi Okiji
Niigata University
P-18 Accuracy of CAD/CAM crowns using two digital scanners in the CAD/CAM system
○Sakura Shimizu1, Akikazu Shinya1,2, Soichi Kuroda1, Akihiro Shinya1, Takahumi Ito3, Akiyoshi Shinya1
1
Nippon Dental Univ., 2Univ. of Turku, 3TECHNICAL CENTER Co.Ltd.
P-19 Development of hybrid composite resin for CAD/CAM processing (Part 2):
Fundamental properties and durability
○Takahiro Kato, Bunichiro Yamada, Teruo Anraku
Yamamoto Precious Metal Co., Ltd.
P-20 Evaluation for the usefulness of a new lost-wax casting process using additive manufacturing technology
(3D printer)
○Hajime Takada, Hiroyasu Kanetaka, Shoko Nunome, Hiroaki Katoh, Masahiko Kikuchi
Tohoku University
P-21 Study on dimensional accuracy of mandibular model recreated by 3D printer with dental CT data
○Yoshiki Ishida, Taira Miyasaka, Harumi Aoki, Hiroko Soma, Yusuke Aoyagi, Daisuke Miura,
Taisuke Kawai, Rieko Asaumi, Akiyoshi Shinya, Sakura Shimizu
Nippon Dental Univ. at Tokyo
P-22 Influence of the superstructure material on occlusion shock of the dental implant
- Examination by finite element method ○Sakae Nagasawa1, Yuji Kawase1, Ken Takeuchi1, Takamitsu Yoshida2
1
Matsumoto Dental University, 2Indiana University
P-23 Observation of pit and fissure sealants by using optical coherence tomography
○Mayumi Kotaku, Masayoshi Iino, Masayuki Takimoto, Ryosuke Murayama,
Yutaka Shimamura, Hiroyasu Kurokawa, Masashi Miyazaki
Nihon University
P-24 Study on machinability of dental zirconia materials
○Noriko Nakao, Satoshi Sakoda, Ikuya Watanabe
Nagasaki University
P-25 Effect of toothbrushing with dentifrices to dental zirconia
○Shozo Tsuruta, Masanobu Mizuno, Yasuaki Uematsu, Akihito Hasegawa, Tatsushi Kawai, Iichiro Yamamoto
Aichi Gakuin University
P-26 Effect of a trial shining abrasive based from diatomite to the denture acrylic resin
○Yukimichi Tamaki, Katsuhiro Tsuboi, Mayumi Iijima, Yuko Komada, Masato Hotta
Asahi University
P-27 Thermochromism of restorative composite resins
（Part 2）Thermal dependence of refractive index of base resins
○Hiroyuki Arikawa, Takahito Kanie, Akihiko Kadokawa, Masafumi Kikuchi
Kagoshima University
P-28 The effect of sandblasting conditions to the dental alloy of the bond-durability of indirect composite
○Shuhei Takahashi, Mitsuji Teramae, Toshiyuki Nakatsuka
Shofu INC.
P-29 Characteristics of the resin blocks prepared by the filler press and monomer infiltration method
○Koichi Okada1,2, Takehiro Kameya2, Hiroshige Ishino2, Tohru Hayakawa1
1
Turumi University, 2Kuraray Noritake Dental Inc.
P-30 Contribution of solvent effects on silane coupling treatment of inorganic filler for dental resin
○Yusuke Mizuta,Takeru Sakamoto, Bunichiro Yamada, Teruo Anraku
Ymamoto Precious Metal Co., Ltd.
P-31 Stress relaxation of polymers made from blends of two diacrylates
○Takahito Kanie, Hiroyuki Arikawa, Akihiko Kadokawa, Masafumi Kikuchi
Kagoshima University
P-32 Study of carbon-nanotube- and chitosan-fiber/polyurethan composite materials with shape-memory effect
○Kyotaro Kawaguchi1, Masahiro Iijima1, Takashi Murakami2, Takeshi Muguruma1, Kazuhiko Endo1
1
Health Sciences University of Hokkaido, 2Shimadzu Corporation
P-33 Discoloration of acrylic resin by cosolvent addition
○Takashi Nezu, Futami Nagano-Takebe, Hirokazu Toshima, Kazuhiko Endo
Health Sciences University of Hokkaido
P-34 Preparation of organo-mineral complexes by electrolysis: Adhesion characteristic of mineral particles
on metal plate
○Seigo Okawa, Mitsugu Kanatani, Kenji Izumi
Niigata University
P-35 Effects of water storage on viscoelastic properties and bond strength of
commercial soft denture lining materials
○Naohiko Iwasaki, Chisato Yamaki, Hidekazu Takahashi, Tetuya Suzuki
Tokyo Medical and Dental University
P-36 Influence of the operation procedures on the dynamic mechanical properties of self-cured resins
○Kazuma Takase, Kazuhiro Yoshida, Tadafumi Kurogi, Kaori Iwai, Hiroshi Murata
Nagasaki University
P-37 Influence of HEMA and TEGDMA on osteoclast differentiation
○Hiroyuki Inamitsu, Kazuma Takase, Tadafumi Kurogi, Hiroshi Murata
Nagasaki University
P-38 Effect of thione primers on bonding between Ag-Pd-Cu-Au alloy and an indirect composite material
○Hiroyasu Koizumi1, Hideyuki Imai1,2, Saiji Shimoe2, IsaoHirata2, Hiroki Nikawa2,Hideo Matsumura1
1
Nihon University, 2Hiroshima University
P-39 Effect of ultraviolet surface treatment and application of primers on bond strength between mouthguard sheet
and dental silicone
○Shintaro Fukasawa, Hiroshi Churei, Takahiro Wada, Motohiro Uo, Hidekazu Takahashi, Toshiaki Ueno
Tokyo Medical and Dental University
P-40 Analysis of self-assembled presipitate in bonding agent
○Kumiko Yoshihara1, Noriyuki Nagaoka1, Yasuhiro Yoshida2
1
Okayama University, 2Hokkaido University
P-41 Fracture strength of resin facing crowns fabricated with the newly developed primer and frameworks
made of various materials for CAD/CAM system
○Hiroaki Kimura, Mari Tsuneishi, Takahiro Kato, Bunichiro Yamada, Teruo Anraku
Yamamoto Precious Metal Co., Ltd.
P-42 Study on modification effect using multi primers -Bond strength to composite on modified glass surface○Katsura Ohashi, Kaori Miyake, Hiroaki Yamaguchi, Akihiro Oshikawa, Kazuo Shimoyama,
Toshiyuki Suzuki, Katsuhiko Kimoto, Tomotaro Nihei
Kanagawa Dental University
P-43 Study on modification effect using silane coupling agents
-Bond strength to composite on modified glass surface using commercial silanes○Hiroaki Yamaguchi, Katsura Ohasi, Kaori Miyake, Akihiro Osikawa, Kazuo Simoyama, Tomotarou Nihei
Kanagawa Dental University
P-44 Application of N,N-dimethylaniline derivatives as coinitiator of photoinitiating system for dental adhesives
○Takeshi Sakamoto, Bunichiro Yamada, Teruo Anraku
Yamamoto Precious Metal Co., Ltd.
P-45 Effect of restorative materials and UV times on bond strength to self-adhesive resin cement
○Akihiro Shinya, Sakura Shimizu, Hirohumi Nagata, Toru Kiuchi, Tetsuji Matsuda, Akiyoshi Shinya
Nippon Dental Univ
P-46 Effects of bond strength self adhesive cements and resin cements to zirconia treated ceramic primer
○Akinori Niitsuma1, Akikazu Shinya1, 2, Souiti Kuroda1, Akihiro Shinya1, Akiyoshi Shinya1
1
Nippon Dental Univ., 2Univ.of Turku
P-47 Influence of curing mode and mixing method on water sorption and solubility of self-adhesive resin cements
○Keiichi Yoshida, Ayano Shinohara, Takashi Sawase
Nagasaki University
P-48 Analysis of chemical interaction of between zirconia materials and functional monomers
○Saiji Shimoe1, Yuji Chiba1, Isao Hirata1, Shogo Iwaguro1, Hideo Matsumura2, Koichi Kato1
1
Hiroshima University, 2Nihon University
October 5（Sunday）
▪ Hall A
9:00 - 11:15 General Presentation (Oral Session)
A-16 Prediction of flexural strength of composite resins by in silico three-point bending analysis
○Satoshi Yamaguchi, Idris Mehdawi, Satoshi Imazato
Osaka University
A-17 Development of original powder-liquid mixed type low water absorption PMMA/MMA based resin (Part 2)
- Effect of polymerization initiator ○Jiro Tanaka1, Masao Irie1, Yoshiya Hashimoto2, Takuya Matsumoto1
1
Okayama University, 2Osaka Dental University
A-18 Cytotoxic evaluation of newly developed materials by using bioluminescence-based ARE
reporter assay system
○Miki Egashira, Takahiro Suzuki, Mitsumasa Mizuno, Koutarou Fujimoto, Kouki Aimu, Tatsushi Kawai
Aichi-Gakuin University
A-19 Application of Fourie transform foe analysis of surface topographic properties of dental zirconia
○Naoyoshi Tarumi1, Fumio Watari2
1
Sapporo Dental Laboratory, 2Hokkaido University
A-20 Fabrication of antibacterial yttira-stabilized zirconia
○Kosuke Nozaki, Risa Yamada, Hiroyuki Miura, Kimihiro Yamashita, Akiko Nagai
Tokyo Medical and Dental University
A-21 Chemical apatite coating on the zirconia surface
○Masahiko Ando, Takayuki Suzuki, Tathushi Kawai, Hiroshi Murakami, Masami Hattori, Seiji Ban
Aichi-Gakuin University
A-22 Fabrication of nanosized hydroxyapatite via a homogeneous solid reaction
○Masahiro Okada1, Yuko Omori2, Naoyuki Matsumoto2, Takuya Matsumoto1
1
Okayama University, 2Osaka Dental University
A-23 Evaluation of mechanical property of octacalcium phosphate compacts with various crystal morphology
○Mayumi Iijima, Nobukazu Wakamatsu, Yuuko Komada, Yukimichi Tamaki
Asahi Univrsity
A-24 Introduction of interconnected porous structure to calcium phosphate forming bone cements
○Kanji Tsuru,Anuar Shariff Khairul, Riki Toita, Kunio Ishikawa
Kyushu University
▪ Hall A
13:15 - 14:15 Special Lecture 2
The role of engineering in stem cell-based regenerative medicine
~Materials for culturing human pluripotent stem cells~
Miho K Furue
National Institute of Biomedical Innovation
▪ Hall A
15:00 - 17:00 General Presentation (Oral Session)
A-25 Development of protein stock solution using ionic liquids: A long-term stability of proteins at room temperature
○Shigeaki Abe1, Kotaro Kaneko2, Koji Kawai2, Tsukasa Akasaka1, Yasuhiro Yoshida1
1
Hokkaido University, 2Miyoshi Oil and Fat Co., Ltd.
A-26 Quantitative analysis of mineralized tissue formation during cartilage secondary ossification of mouse femur
○Emilio Satoshi Hara, Masahiro Okada, Takuya Matsumoto
Okayama University
A-27 Extent of osteoconductivity of octacalcium phosphate with coexistence of amorphous calcium phosphate
○Kazuhito Kobayashi, Takahisa Anada, Tetsu Takahashi, Osamu Suzuki
Tohoku University
A-28 Hydrothermal apatite synthesis from calcium oxide and polyphosphate （Part3）
-Conditions of poly phosphate production –
○Hideaki Narusawa1, Toshikazu Shiba2, Hiroyuki Owada1, Yu Kataoka1, Takashi Miyazaki1
1
Showa University, 2regenetiss inc.
A-29 Development of a dental temporary luting agent by applying methacrylate-based polymers (3)
－ Mixing time and powder liquid ratio－
○Hidetoshi Okada, Ichirou Ryukata, Yoshinori Ishida, Isao Kawashima
Ohu University
A-30 Development of a simulator for experiencing cutting sensation when drilling during implant surgery
○Kinoshita Hideaki, Takemoto Shinji, Yoshinari Masao, Kawada Eiji
Tokyo Dental College
A-31 Development of 3D evaluation technique for dental prosthesis fit by using X-ray micro CT
○Yuzo Oka, Kazumichi Wakabayashi, Junichi Sasaki, Takashi Nakamura, Satoshi Imazato, Hirofumi Yatani
Osaka University
A-32 Setting Characteristic Determination of Elastomeric Impression Materials Using Ultrasonic Devices
○Ryosuke Murayama, Tetsuya Furuichi, Yukie Tamura, Ryo Kawamoto, Hiroyasu Kurokawa, Masashi Miyazaki
Nihon University
17:00 - 17:05 Closing Remark
October 5 (Sunday)
▪ Hall B
9:30 - 16:30 General Presentation (Poster Session)
(Odd numbers: 11:15 - 12:00, Even numbers: 14:15 - 15:00 Discussion)
P-49 Effects of support materials of specimens on occlusal wear of dental porcelain
○Kiyoshi Kakuta, Kazuo Ohkuma, Yukio Miyagawa
Nippon Dental University
P-50 Intraoral Ni dissolution and its distribution in the rat oral mucosa
○Toshihiro Imamura1, Tomoko Sugiyama2, Midori Yoshida3, Takahiro Wada1, Motohiro Uo1
1
Tokyo Medical and Dental University, 2Jichi Medical University, 3Tokushima University
P-51 Migration of aromatic amines from an autopolymerizing resin into food simulants
○Toshio Hongo, Takahiro Wada, Motohiro Uo
Tokyo Medical and Dental University
P-52 Reduction of oral malodor of elderly requiring long-term care by denture cleaning and mouth washing
with neutral electrolyzed water
○Yuki Nagamatsu1, Hiroshi Nagamatsu1, Shigeki Murakami2, Yoshio Kozono1, Hiroshi Shimizu1
1
Kyushu Dental University, 2Kyushu University of Nursing and Social Welfare
P-53 Improvement in durability of neutral electrolyzed water gel by Ar gas replacement at the time of
preparation and storage
○Yuki Nagamatsu, Nagamatsu Hiroshi, Yoshio Kozono, Hiroshi Shimizu
Kyushu Dental University
P-54 Preparation and osteogenesis of super-high molecule DNA scaffold
○Shougo Tamura1, Masako Toda1, Yosuke Shinozaki1, Jun Ohno1, Masao Ozaki1,
Makoto Mitarai2, Tohru Hayakawa3,Tadao Fukushima1
1
Fukuoka Dental College, 2Maruha Nichiro Corporation, 3Tsurumi University
P-55 Hardness and modulus of the cementum-dentin junction region
○Toshiko Inoue, Makoto Saito, Masato Yamamoto, Fumio Nishimura, Takashi Miyazaki
Showa University
P-56 Change in bone mass and bone quality in mandible under the presence and absence of the in vivo biting stress
○Wataru Fujitani, Takayoshi Nakano
Osaka University
P-57 Clumps of mesenchymal stem cells/extracellular matrix complex can be a novel tissue engineering therapy
for bone regeneration
○Mikihito Kajiya, Mizuho Kittaka, Hideki Shiba, Manabu Takewaki, Kei Takeshita, Tomoyuki Iwata,
Kazuhisa Ouhara, Katsuhiro Takeda, Tsuyoshi Fujita, Hidemi Kurihara
Hiroshima University
P-58 Initial cell attachment to poly(lactic acid-ε-caprolactone) film with carboxylic acid groups
○Megumi Fuse1, Masahiko Fukumoto1, Tohru Hayakawa2
1
Nihon University, 2Tsurumi University
P-59 Fabrication of micro/nano-patterned gelatin for cell adhesion studies
○Naoyuki Kaga, Tsukasa Akasaka, Atsurou Yokoyama, Yasuhiro Yoshida
Hokkaido University
P-60 Effects of shape of aluminum nanomaterials on fibroblasts and macrophages
○Masanori Hashimoto, Jun-ichi Sasaki, Satoshi Imazato
Osaka University
P-61 Effects of cell type on cell adhesion of micro/nano-patterned composite resin
○Tsukasa Akasaka, Naoyuki Kaga, Shigeaki Abe, Yasuhiro Yoshida
Hokkaido University
P-62 Functional assessment of porous carbonate apatite as a bone substitute
○Harumi Kawaki, Takashi Horiguchi, Nobuo Kondoh, Yutaka Doi
Asahi University
P-63 Antibody arrays for high-throughput assessment of surface markers expressed on mesenchymal stem cells
○Ryo Nishikiori, Koutarou Watanabe, Koichi Kato
Hiroshima University
P-64 Effects of vacuum ultraviolet photofunctionalization of titanium on human bone marrow derived
mesenchymal stem cell activities
○Kohei Shintani1, Harumi Kawaki1, Mitsunori Uno1, Tadayasu Kajimoto1, Hajime Ishigami1,
Masato Hotta1, Masao Yoshinari2, Nobuo Kondoh1, Yutaka Doi1
1
Asahi University, 2Tokyo Dental College
P-65 Analytical electron microscopic (EDS) observation of H2O2 production from Ti-6Al-4V plate adherent
human polymorphonuclear leukocytes
○Keiichi Moriguchi, Masaki Asakura, Shozo Turura, Tatsushi Kawai
Aichi-Gakuin University
P-66 MC3T3-E1 cytocompatibility of titanium sputter-deposited with zirconium
○Takayuki Umezawa, Peng Chen, Yusuke Tsutsumi, Hisashi Doi, Maki Asida,
Shoichi Suzuki, Keiji Moriyama, Takao Hanawa
Tokyo Medical and Dental University
P-67 Adsorption analysis of lactoferrin by using quartz-crystal microbalance method
○Eiji Yoshida, Tohru Hayakawa
Tsurumi University
P-68 Fabrication of β-TCP/PLLA composite scaffold for bone tissue engineering
○Takaaki Arahira, Michito Maruta, Shigeki Matsuya
Fukuoka Dental College
P-69 Formation of calcium phosphate on anodic titania nanotubes
○Wen-Fu Ho1, Hsueh-Chuan Hsu2, Ming-Shiun Tsai3, Hisaji Kikuchi4, Tomoko Kurotani4,
Shih-Ching Wu2, Shih-Kuang Hsu2
1
National Univ. of Kaohsiung, 2Central Taiwan Univ. of Sci. and Tech., 3Da-Yeh Univ., 4Nihon Univ.
P-70 The improvement of biocompatibility of Ti-25Nb-8Sn alloy surface by coating with RGD peptide
Hsueh-Fang Wang1, ○Hsueh-Chuan Hsu2, Yun-Shan Chen2, Wen-Fu Ho3,
Shih-Ching Wu2, Shih-Kuang Hsu2
1
Hungkuang Univ., 2Central Taiwan Univ. of Sci. and Tech., 3National Univ. of Kaohsiung
P-71 Effect of ultrasonic cleaning and storage environment on color difference of titanium specimens in tarnish test
○Masatoshi Takahashi, Taichi Tenkumo, Yukyo Takada
Tohoku University
P-72 The mechanobiological availability of Ti-Nb-Sn with low young's modulus and high-strength
○Kenta Takahashi, Naru Shiraishi, Risa Ishiko-Uzuka, Takahisa Anada,
Osamu Suzuki, Hiroshi Masumoto, Keiiti Sasaki
Tohoku University
P-73 Effect of solution treatment on microstructure and mechanical strength of newly developed commercial dental
Ag base alloy
○Yushi Hoshiya1, Toshikazu Akahori1, Hisao Fukui2, Mitsuo Niinomi3
1
Meijo University, 2Aichi-Gakuin University, 3Tohoku University
P-74 Corrosion resistance of high nitrogen inclusion Co-Cr-Mo-W alloy
○Hisashi Doi1, Yusuke Tsutsumi1, Maki Ashida1, Peng Chen1, Naoyuki Nomura2, Takao Hanawa1
1
Tokyo Medical and Dental University, 2Tohoku University
P-75 Time dependence of mercury dissolution into the discharged water after amalgam removal
○Harumi Aoki, Taira Miyasaka, Hiroko Soma, Yusuke Aoyagi, Yoshiki Ishida, Daisuke Miura
Nippon Dental Univ. at Tokyo
P-76 Study on recovery of debris after amalgam removal
○Yusuke Aoyagi, Taira Miyasaka, Harumi Aoki, Hiroko Soma, Yoshiki Ishida, Daisuke Miura
Nippon Dental Univ. at Tokyo
P-77 Determination of setting behavior of resin cement utilizing universal adhesive system
○Hiroyasu Kurokawa, Hirotaka Takenaka, Sho Shibasaki, Masayuki Takimoto, Masashi Miyazaki
Nihon University
P-78 Bond strength and mechanical strength of glass-ionomer cement for filling in initial stage
Masao Irie, Jiro Tanaka, Takuya Matsumoto, Hiroaki Takeda, Yasuhiro Torii,
Yukinori Maruo, Goro Nishigawa, Noriyuki Nagaoka
Okayama University
P-79 Buffering effects by released ions from glass-ionomer cements
○Masayuki Kaga1, Hirokazu Toshima1, Yusuke Ida2, Futami Takebe1, Takashi Nezu1, Kazuhiko Endo1
1
Health Sciences Univ. of Hokkaido, 2Univ. of Tokyo
P-80 Physical properties of GC Luting VErsa
○Koji Tanaka, Syouichi Fukushima, Futoshi Fusejima, Tomohiro Kumagai
GC CORPORATION
P-81 Analysis of MTA cement and glass ionomer cement interface
○Noriyuki Nagaoka1, Kumiko Yoshihara1, Yasuhiro Yoshida2
1
Okayama University, 2Hokkaido University
P-82 Properties of mechano-chemically modified β-TCP based Calcium Phosphate Cement
○Yumika Ida, Jiyoung Bae, Kazumitsu Sekine, Fumiaki Kawano, Kenichi Hamada
The University of Tokushima
P-83 Effect of incorporation of hydrophilic resin components into glass ionomer cements for filling on
their fracture toughness
○Hirotaka Shigeta, Ken-ichi Matsumoto, Satoru Awata, Jun Omatsu, Ken-ichi Wada,
Yuko Nagasawa, Yasushi Hibino, Hiroshi Nakajima
Meikai University
P-84 Application of α-TCP/Te-CP cement to root canal sealer
- pH behavior, X-ray diffraction, SEM, liquid permeation test of α-TCP/Te-CP cement○Chikako Kamiyama, Shinpei Takeda, Satoshi Kawano, Yukimichi Tamaki, Takakazu Yoshida
Asahi University
P-85 Effect of moisture condition on polymerization and adhesion of self-adhesive resin cement
○Hirotaka Takenaka, Kie Nojiri, Sho Shibasaki, Akimasa Tujimoto,
Toshiki Takamizawa, Hiroyasu Kurokawa, Masashi Miyazaki
Nihon University School of Dentistry
P-86 The characteristic of milling and the sintering shrinkage of zirconia for dental milling
○Hisayoshi Narikiyo, Hidekazu Tanaka, Yuji Sato, Masatoshi Yamazoe, Teruo Anraku
Yamaoto Precious Metal Co., Ltd.
P-87 Effect of test methods on Flexural strength of dental hard resins and ceramics
○Daisuke Miura, Taira Miyasaka, Harumi Aoki, Hiroko Soma, Yusuke Aoyagi, Yoshiki Ishida
Nippon Dental Univ. at Tokyo
P-88 Development of new zirconia with super high translucency for dental milling Part 1: Mechanical characteristic
○Taro Morimoto, Hidekazu Tanaka, Yuji Sato, Masatoshi Yamazoe, Teruo Annraku
Yamamoto Precious Metal Co.,Ltd.
P-89 Development of new zirconia with super high translucency for dental milling Part 2: Optical characteristic
○Hidekazu Tanaka, Yuji Sato, Masatoshi Yamazoe, Teruo Anraku
Yamamoto Precious Metal Co.,Ltd
P-90 Low temperature degradation and flexural strength change of high translucent zirconia
(Part 3) -Fracture strength of zirconia full-contour crown ○Takayuki Suzuki, Masahiko Ando, Tatsushi Kawai, Hiroshi Murakami, Masami Hattori, Seiji Ban
Aichi Gakuin University
P-91 Optical properties of Transpa Dentine porcelain for veneering zirconium dioxide substructures
○Takanobu Shiraishi1, Kahori Ikeda2, Nobuya Shinozaki3, Ikuya Watanabe1
1
Nagasaki University, 2Takada Dental Clinic, 3Kyushu Institute of Technology
P-92 Influence of zirconia coping design and chemical spreading on the strength of all-ceramic crown
○Shin-ichi Goto, Hiroshi Maruyama, Miku Kazama-Koide, Yukio Miyagawa
The Nippon Dental University
P-93 The effect of the thickness of Lithium disilicate and Layering Porcelain on the flexural strength of
all ceramics crown
○Keita Kawata, Mitsuji Teramae, Toshiyuki Nakatsuka
Shofu INC.
P-94 EPMA analysis of the bonding interface between primer-treated zirconia and veneering porcelain
○Miku Kazama-Koide, Shin-ichi Goto, Yukio Miyagawa
The Nippon Dental University
P-95 Evaluation of fitting accuracy of casting bridge with next generation gypsum-bonded investment
for quick casting
○Emiko Fukushima, Daizaburo Mori, Tomohiro Kumagai
GC Corporation
P-96 Effects of the immersion in disinfectant solutions of combined agar/alginate impressions on the surface property
of stone models
○Hisako Hiraguchi, Hisaji Kikuchi, Hideharu Hirose, Takayuki Yoneyama
Nihon University
P-97 Mechanical evaluation of PGA/HA composites for an orthodontic anchoring screw
○Momoko Takahashi, Masaru Yamaguchi, Yasuhiro Tanimoto, Eriko Yao, Kazutaka Kasai
Nihon University at Matsudo