Download WICS-2222 Infection Control Hand Washing Sink A.D.A.

Willoughby Industries - Healthcare Products
WICS-2222
Infection Control
Hand Washing Sink
A.D.A. Compliant
Recommended Specifications
To specify fixture and accessories, use the Model Number and Options page.
Example: To specify an infection control hand washing sink with a stainless steel pedestal, wrist blade faucet in
sandstone color.
Use the following Willoughby Model Number: WICS-2222-WB2-SS1.
Wall-hung Infection Control Hand Washing Sink shall accommodate one user and is designed to minimize spread of infectious
disease. ADA compliant solid surface sink shall be Willoughby
Model No. WICS-2222.
Infectious Control Features:
• Deep sink basin w/ sloped edges to minimize splashing
• Integral side and rear splash-guards to prevent splash
from landing outside of bowl
• Offset sink drain to prevent aerosolization of trap
The sink bowl with integral side and rear splash-guards shall be
contents
constructed of Aquasurf® molded cast polymer densified solid
• Antimicrobial drain and tail piece to restrict growth and
surface material composed of polyester/acrylic resin, UV stabicolonization of bacteria (optional trap available)
lizer, aluminum trihydrate and mineral fillers. The Aquasurf® solid
• No overflow in sink basin to limit possible area for
surface material is resistant to stains, impact and burns. Surface
bacteria growth
damage can be easily repaired with everyday cleansers and/or
fine grit abrasives.
ADA,TAS,UFAS and Plumbing Standard Compliant:
When the lavatory is mounted at the standard adult rim height,
WICS-2222 sink shall be supplied with:
it is designed to provide compliance with all applicable ADA,
TAS, UFAS accessibility standards. It also complies with the
• Antimicrobial drain and tailpiece. (trap by others)
(optional antimicrobial trap available - AMT on page 2)
requirements of the CSA B45,5-11/APMO Z124-2011
harmonized plumbing standard.
• 1.5 gpm non-aerating laminar outlet rigid goose neck
faucet with wristblade controls. (optional infrared (IR)
faucet models and thermostatic mixing valve available)
Mounting:
The sink may be surface-mounted as supplied or supported by
• Fully welded wall hung pedestals for surface mounting.
in-wall carriers supplied by others. Proper backing for surface(mounting hardware by others)
• One piece formed stainless steel trap cover w/ stainless
mounted sinks provided by others.
steel mounting hardware
Optional Features:
* Note: Plug-in transformer must be used with a ground fault
visit our website at www.willoughby-ind.com
5105 West 78th Street ● Indianapolis, IN. 46268
(317) 875-0830 ● Fax: (317) 875-0837 ● (800) 428-4065
© Rev. 2/2015
MADE IN THE U.S.A.
17-41
MODEL NUMBER AND OPTIONS:
1.) Lavatory Model:
WICS-2222
2.) Faucet:
WB2 Wristblade, 4CC, 1.5 GPM Laminar Flow, Rigid 3 1/2" Gooseneck Faucet (Standard)
SSF
Sensor Spout, IR Operated (24v Transformer is required)
SSF-B Sensor Spout, IR Operated (battery operated)
3.) Lavatory Deck Colors:
BN
Bone (Solid)
BG
Black Granite
GG
Grey Granite
GW
Glacier White (Solid)
NB
Nocturnal Blue
RC
Red Coral
SG
Sea Green
SS
Sandstone
WG
White Granite
4.) Options:
TF
24v Transformer (SSF Faucet Only)
TMV Thermostatic Mixing Valve
 AMT Antimicrobial Trap
Approved For Manufacturing By:
Date:
Company:
WILLOUGHBY RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN AND
DIMENSIONS WITHOUT FORMAL NOTICE AND WITHOUT INCURRING OBLIGATION.
VERIFY ALL DIMENSIONS WITH FACTORY PRIOR TO ROUGH-IN
22-1/4"
22"
16-1/4"
6-1/2"
34"
ADA
MAX
8-1/2"
16-7/16"
FINISHED FLOOR
visit our website at www.willoughby-ind.com
5105 West 78th Street ● Indianapolis, IN. 46268
(317) 875-0830 ● Fax: (317) 875-0837 ● (800) 428-4065
17-42
28-7/8"
MADE IN THE U.S.A.
© Rev. 2/2015