Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
AC/DC Industrial Power Supply • DIN Rail • 480W Cosel KH480 Series TRC ELECTRONICS, INC. Providing exceptional customer service since 1982 AC-DC Power Supplies DIN Rail Type KHEA/KHNA480F Ordering information KHO 1 2 A 3 480 4 F Recommended EMI/EMC Filter NAC-10-472-D R High voltage pulse noise type : NAP series Low leakage current type : NAM series -OO -O 5 6 1Series name KHE:Euro style I/O terminals KHN:Barrier blocks style I/O terminals 2Single output 3Output wattage 4Universal input 5Output voltage 6Option C : with Coating N2 : Screw mounting *The EMI/EMC Filter is recommended to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT KHEA / KHNA480F-24 480 24V 20A (Peak 30A) SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] FREQUENCY[Hz] ACIN 115V ACIN 230V ACIN 115V POWER FACTOR ACIN 230V INRUSH CURRENT[A] ACIN 115V *1 ACIN 230V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] *2 PEAK CURRENT[A] *3 LINE REGULATION[mV] LOAD REGULATION[mV] *3 0 to +70C *4 -25 - 0C RIPPLE[mVp-p] Io=0 - 30% 0 to +70C OUTPUT RIPPLE NOISE[mVp-p] *4 -25 - 0C Io=0 - 30% 0 to +70C TEMPERATURE REGULATION[mV] -25 to +70C *5 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND DC_OK LAMP OTHERS ALARM LAMP DC_OK CONTACT INPUT-OUTPUT INPUT-PE ISOLATION OUTPUT-PE OUTPUT-RC, DC_OK OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT *8 VIBRATION IMPACT SAFETY AND AGENCY APPROVALS (At only AC input) CONDUCTED NOISE NOISE REGULATIONS HARMONIC ATTENUATOR *7 CASE SIZE OTHERS WEIGHT COOLING METHOD INPUT KH ACIN 115V ACIN 230V EFFICIENCY[%] KHEA / KHNA480F-48 480 48V 10A (Peak 15A) KHEA / KHNA480F-24 KHEA / KHNA480F-48 AC85 - 264 1f (Output derating is required) or DC88 - 350 *10 4.6typ 2.3typ 50 / 60 (47 - 63) or DC 92typ 94typ 0.98typ 0.93typ 20typ (more than 3 sec. to re-start) 40typ (more than 3 sec. to re-start) 0.75 / 1.5max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60950-1 and DEN-AN) 24 48 20 10 30 15 96max (Io=30-100%) *9 192max (Io=30-100%) *9 150max (Io=30-100%) *9 300max (Io=30-100%) *9 120max 120max 240max 240max 500max 750max 150max 150max 300max 300max 600max 750max 240max 480max 360max 600max 96max 192max 750max (ACIN 115V, Io=100%) 20typ (ACIN 115V, Io=100%) 22.5 to 26.4 45.0 to 55.2 24.0±1.0% 48.0±1.0% Works over 101% of peak current and recovers automatically 30.0 to 36.0 57.6 to 67.2 LED (Green) LED (Red) Relay contact 30VDC 1A max, 30VAC 0.5A max (resistive load) (Only KHEA) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min(At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min(At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min(At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min(At Room Temperature) -25 to +70C (Required to Derating), 20 - 90%RH (Non condensing) -40 to +85C, 20 - 90%RH (Non condensing) 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60 minutes along Z axis (Non operating, mounted on DIN Rail) 196.1m/s2 (20G), 11ms, once each X, Y and Z axis (Packing state) UL60950-1, C-UL (CSA60950-1), EN60950-1, EN50178, UL508, ANSI / ISA12.12.01 Complies with DEN-AN Complies with FCC-B, VCCI-B, CISPR22-B, EN55011-B, EN55022-B Complies with IEC61000-3-2(Class A) *6 70X124X117mm (WXHXD) [2.76X4.88X4.61 inches] 1,200g max Convection / Forced air *1 The value is primary surge. The current of input surge to a built-in EMI/EMC Filter(0.2ms or less)is excluded. *2 Refer to 3, instruction manual. *3 Please contact us about dynamic load and input response. *4 This is the value that measured on measuring board with capacitor of 22mF and 0.1mF at 150mm from output terminal. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM103). KH-12ELECTRONICS, INC. TRC Please refer to the instruction manual 2.7. *5 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/ output. *6 Please contact us about another class. *7 Case size contains neither the umbo. *8 Only as standard mounting orientation (A). Refer to the instruction manual 5.1. If install other than standard mounting orientation (A), please fix the power 1.888.612.9514 supply for withstand the vibration and impact. *9 Burst operation at 30% load or less. *10 Under low DC input voltage below DC110V, the temperature derating -1C/V or the output power derating -1%/V are required. * To meet the specifications. Do not operate over-loaded condition. * A sound may occur from power supply at light or peak loading. www.trcelectronics.com/cosel AC/DC Industrial Power Supply • DIN Rail • 480W Cosel KH480 Series TRC ELECTRONICS, INC. Providing exceptional customer service since 1982 KH series Block diagram FUSE 250V 15A AC IN 85~264V NOISE FILTER INRUSH CURRENT LIMIT RECTIFIER PE BOOSTER INDUCTOR CURRENT SENSING RECTIFIER AND FILTER INVERTER TRANSFORMER INVERTER CURRENT SENSING Photocoupler CONTROL RECTIFIER AND FILTER DC OUT OVER VOLTAGE PROTECTION Photocoupler CONTROL CONTROL PhotoMosRelay DC_OK (Only KHEA) Photocoupler RC (Remote ON/OFF) External view <KHEA480F(Euro Style I/O Terminals)> <KHNA480F(Barrier Blocks Style I/O Terminals)> -RC +RC 27.1 111.2 6.4 [1.07] -RC +RC 30.4 [4.38] [0.25] DC_OK Output terminal(+) Output terminal(-) LED(ALARM) LED(DC_OK) Output voltage adjustable potentiometer 10 [1.2] 2 7-M4 [0.08] [0.39] 111.2 [4.38] [1] 70 [4.77] [2.76] 25 [0.98] 10 70 [0.39] [5.26] (65.7) [2.59] 69 [0.65] 133.5 124 [4.88] [4.15] Name plate [2.72] 16.5 9.3 [2.59] (65.7) 121.2 [0.37] 105.4 [5.26] 124 [0.3] 117 [4.61] 9.5 25.5 AC(L) AC(N) PE [0.37] [0.65] LED(ALARM) LED(DC_OK) Output voltage adjustable potentiometer 69 7.5 16.5 133.5 Name plate [2.72] AC(L) AC(N) PE [4.88] 109 [4.29] Output terminal(+) Output terminal(-) 117 [4.61] KH 121.2 [4.77] [2.76] Tolerance : ±1 [±0.04] Weight : 1,200g max PCB Material/thickness : FR-4 / 1.6mm [0.06] Chassis material : Aluminum Case material : Stainless steel DIN rail attachment material : Aluminum, Nylon Dimensions in mm, [ ] = inches Screw tightening torque : 1N m max TRC ELECTRONICS, INC. 1.888.612.9514 Tolerance : ±1 [±0.04] Weight : 1,200g max PCB Material/thickness : FR-4 / 1.6mm [0.06] Chassis material : Aluminum Case material : Stainless steel DIN rail attachment material : Aluminum, Nylon Dimensions in mm, [ ] = inches Screw tightening torque : 1.6N m max KH-13 www.trcelectronics.com/cosel