Download KHEA/KHNA240F - TRC Electronics

AC/DC Industrial Power Supply • DIN Rail • 240W
Cosel KH240 Series
TRC ELECTRONICS, INC.
Providing exceptional customer service since 1982
AC-DC Power Supplies DIN Rail Type
KHEA/KHNA240F
Ordering information
KHO
1
2
A
-240
3
4
F
Recommended EMI/EMC Filter
NAC-06-472-D
R
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
5
-24
6
-O
1Series name
KHE：Euro style I/O terminals
KHN：Barrier blocks style
I/O terminals
2Single output
3Output wattage
4Universal input
5Output voltage
6Option
C : with Coating
N2 : Screw mounting
*The EMI/EMC Filter is recommended
to connect with several devices.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
KHEA / KHNA240F-24
240
24V 10A (Peak 15A)
SPECIFICATIONS
MODEL
VOLTAGE[V]
CURRENT[A]
FREQUENCY[Hz]
ACIN 115V
ACIN 230V
ACIN 115V
POWER FACTOR
ACIN 230V
INRUSH CURRENT[A] ACIN 115V
*1 ACIN 230V
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
*2
PEAK CURRENT[A]
*3
LINE REGULATION[mV]
LOAD REGULATION[mV] *3
0 to +70C
*5 -25 - 0C
RIPPLE[mVp-p]
Io=0 - 30%
0 to +70C
OUTPUT
RIPPLE NOISE[mVp-p] *5 -25 - 0C
Io=0 - 30%
0 to +70C
TEMPERATURE
REGULATION[mV]
-25 to +70C
*6
DRIFT[mV]
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION
PROTECTION OVERVOLTAGE PROTECTION[V]
CIRCUIT AND DC_OK LAMP
OTHERS
ALARM LAMP
DC_OK CONTACT
INPUT-OUTPUT
INPUT-PE
ISOLATION
OUTPUT-PE
OUTPUT-RC, DC_OK
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT
*9
VIBRATION
IMPACT
SAFETY AND AGENCY APPROVALS (At only AC input)
CONDUCTED NOISE
NOISE
REGULATIONS HARMONIC ATTENUATOR
*8
CASE SIZE
OTHERS
WEIGHT
COOLING METHOD
INPUT
KH
ACIN 115V
ACIN 230V
EFFICIENCY[%]
KHEA / KHNA240F-24
AC85 - 264 1f or DC88 - 370 *10
2.3typ
1.2typ
50 / 60 (47 - 63) or DC
92typ
94typ
0.98typ
0.93typ
20typ (more than 3 sec. to re-start)
40typ (more than 3 sec. to re-start)
0.45 / 0.75max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60950-1 and DEN-AN)
24
10
15
96max
150max *4
120max
240max
240max *4
150max
300max
300max *4
240max *4
360max *4
96max
750max (ACIN 115V, Io=100%)
20typ (ACIN 115V, Io=100%)
22.5 to 28.5
24.0±1.0%
Works over 101% of peak current and recovers automatically
30.0 to 36.0
LED (Green)
LED (Red)
Relay contact 30VDC 1A max, 30VAC 0.5A max (resistive load) (Only KHEA)
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min（At Room Temperature）
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min（At Room Temperature）
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min（At Room Temperature）
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min（At Room Temperature）
-25 to +70C (Required to Derating), 20 - 90%RH (Non condensing)
-40 to +85C, 20 - 90%RH (Non condensing)
10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60 minutes along Z axis (Non operating, mounted on DIN Rail)
196.1m/s2 (20G), 11ms, once each X, Y and Z axis (Packing state)
UL60950-1, C-UL (CSA60950-1), EN60950-1, EN50178, UL508, ANSI / ISA12.12.01 Complies with DEN-AN
Complies with FCC-B, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
Complies with IEC61000-3-2（Class A) *7
50X124X117mm (WXHXD) [1.97X4.88X4.61 inches]
900g max
Convection / Forced air
*1 The value is primary surge. The current of input surge to a built-in EMI/EMC
Filter(0.2ms or less)is excluded.
*2 Refer to 3, instruction manual.
*3 Please contact us about dynamic load and input response.
*4 The output voltage is below 23.5V, the value is equal to three times of the
specification.
*5 This is the value that measured on measuring board with capacitor of 22mF
and 0.1mF at 150mm from output terminal.
KH-10ELECTRONICS, INC.
TRC
Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to
KEISOKU-GIKEN: RM103).
Please refer to the instruction manual 2.7.
*6 Drift is the change in DC output for an eight hour period after a half-hour
warm-up at 25C, with the input voltage held constant at the rated input/
output.
*7 Please contact us about another class.
*8 Case size contains neither the umbo.
1.888.612.9514 *9 Only as standard mounting orientation (A). Refer to the instruction manual 5.1.
If install other than standard mounting orientation (A), please fix the power
supply for withstand the vibration and impact.
*10 Under low DC input voltage below DC110V, the temperature derating
-1C/V or the output power derating -1%/V are required.
* To meet the specifications. Do not operate over-loaded condition.
* A sound may occur from power supply at light or peak loading.
www.trcelectronics.com/cosel
AC/DC Industrial Power Supply • DIN Rail • 240W
Cosel KH240 Series
TRC ELECTRONICS, INC.
Providing exceptional customer service since 1982
KH series
Block diagram
FUSE
250V 8A
AC IN 85～264V
NOISE
FILTER
RECTIFIER
PE
BOOSTER
INDUCTOR
CURRENT
SENSING
INRUSH
CURRENT
LIMIT
RECTIFIER
AND
FILTER
TRANSFORMER
INVERTER
INVERTER
CURRENT
SENSING
Photocoupler
CONTROL
RECTIFIER
AND
FILTER
DC OUT
OVER VOLTAGE
PROTECTION
Photocoupler
CONTROL
CONTROL
PhotoMosRelay
DC_OK (Only KHEA)
Photocoupler
RC (Remote ON/OFF)
External view
<KHEA240F(Euro Style I/O Terminals)>
-RC
9.1
6.4
-RC
+RC
10
10
111.2
[0.25]
[0.36]
<KHNA240F(Barrier Blocks Style I/O Terminals)>
[0.39]
[4.38]
DC_OK
Output terminal(+)
Output terminal(-)
[0.39]
2
7-M4
[0.08]
+RC
111.2
[4.38]
7.5
117
[0.61]
[4.61]
9.5
15.5
50
121.2
[0.37]
[4.77]
15.5
[0.61]
15
[0.59]
10
[0.39]
50
133.5
(65.7)
[5.26]
[4.15]
124
105.4
[2.59]
69
PE
[0.37]
[0.30]
PE
AC(L)
AC(N)
Name plate
[2.72]
[5.26]
133.5
[2.59]
AC(N)
(65.7)
69
[2.72]
AC(L)
LED(ALARM)
LED(DC_OK)
Output voltage
adjustable potentiometer
9.3
Output voltage
adjustable potentiometer
Name plate
124
109
LED(DC_OK)
[4.88]
[4.29]
LED(ALARM)
[4.88]
Output terminal(+)
Output terminal(-)
117
KH
[4.61]
121.2
[4.77]
[1.97]
[1.97]
Tolerance : ±1 [±0.04]
Weight : 900g max
PCB Material/thickness : FR-4 / 1.6mm [0.06]
Chassis material : Aluminum
Case material : Stainless steel
DIN rail attachment material : Aluminum, Nylon
Dimensions in mm, [ ] = inches
Screw tightening torque : 1N m max
TRC ELECTRONICS, INC.
1.888.612.9514 Tolerance : ±1 [±0.04]
Weight : 900g max
PCB Material/thickness : FR-4 / 1.6mm [0.06]
Chassis material : Aluminum
Case material : Stainless steel
DIN rail attachment material : Aluminum, Nylon
Dimensions in mm, [ ] = inches
Screw tightening torque : 1.6N m max
KH-11
www.trcelectronics.com/cosel