Download Desktop Switching Power Supply

23A
Desktop
Switching
Power Supply
Built-in Battery
Backup Circuit
Model
SEC-1223BBM
13.8 VDC
120 VAC
23 Amps
Design Features
-- Advanced Switch Mode Technology
-- Reliable, 12V Nominal DC Uninterruptible Power Source
(DC UPS) in conjunction with external 12V Lead Acid
Battery backup
-- High efficiency, compact and portable
-- Protected against short circuit, overload, over voltage and over temperature
-- Cooling by temperature controlled fan improves efficiency and prolongs life of
the fan
-US
- UL safety listed as “Information Technology Equipment Power Supply” for USA
C
(UL Standard ANSI/UL-60950-1) and for Canada (CSA Standard CAN/CSA-C22.2
LISTED No. 60950-1)
-- Complies with FCC Part 15(B), Class B for limits on conducted and radiated
C UL US Electromagnetic Interference (EMI)
CAMERA-READY LOGOTYPE OF THE UL LISTING MARK FOR CANADA AND THE U.S.
These Marks are registered by Underwriters Laboratories Inc.
3 YEAR WARRANTY
UL
C
UL
C
C
UL
UL
US LISTED
US LISTED
US LISTED
C
UL
LISTED
US LISTED
ModelULNo.
C
The minimum height of the registered trademark symbol
shall be 3/64 of
an inch. When the overall diameter of the UL Mark is less than 3/8 of an inch,
the trademark symbol may be omitted if it is not legible to the naked eye.
UL
US
C
LISTED
US
LISTED
Input Voltage
RELATIVE DESIGN & PROPORTIONS OF THE UL LISTING MARK FOR CANADA AND THE U.S.
KEY TO DIMENSIONS
N
Input Current at: Input Voltage: 120 VAC;
P
AC INPUT
J
F
C F A F
G
J
P
“C” and “US”
34 units
P
56 units
Q
75 units
R
30 units
35 units
59 units
85 units
87 units
176 units
216 units
“LISTED”
T 201 units
0
12
24
36
48
60
72
84
96
108
120
132
144
156
168
180
192
204
216
Input Current at No Load
Inrush current at Startup
US Output
C
LISTEDVoltage
Output Voltage Noise and Ripple
LISTED
Continuous Output Current/
Load Terminals / Battery Terminals
Output Current Limit / Load
Terminals / Battery Terminals
Efficiency at Full Load
M
Q
K
UL
G B
I
T
L
D
E
H
P
I
F
P
T
Please note:
Not all of these elements should be used together with the same UL Mark.
The word “LISTED” would only be used once — either to the right of or
below the UL Mark (as shown).
The font for all letter forms is Helvetica Condensed Black, except for
the trademark symbol , which is Helvetica Condensed Medium.
No other fonts are acceptable.
200-195S 10M/8/98
EXTERNAL BATTERY
(Not included)
PROTECTIONS
I
J
K
L
M
N
0
Output Voltage: 13.8V; Output Current: 23A
O
DC OUTPUT
UL Mark
8 units
A
13 units
B
14 units
C
15 units
D
17 units
E
20 units
F
24 units
G
29 units
H
R
Voltage / CAPACITY
Short Circuit, Overload
Over Voltage
Over Temperature
COOLING
Forced Air
Internal AC Side Fuse
FUSES
External DC Side Fuse for
External Battery (By User)
Safety
COMPLIANCE
Electro Magnetic Interference (EMI )
AC Input Connection
INPUT/OUTPUT
CONNECTIONS
DC Output Connectors for Load
and Battery Connections
Battery cables
ENVIRONMENT
GENERAL
Operating Temperature Range
Dimensions (W x D x H) mm/INCH
Weight (kg/lb)
NOTE: Specifications are subject to change without notice
SEC-1223BBM
120 VAC Nominal (+6% / -10%), 60 Hz
5.5A @ 120 VAC
53 mA ± 10%
28A ± 5% for 2.8 ms
Load Terminals: 13.8 VDC / Battery Terminals: 13.8 VDC
< 150 mV Peak to Peak
23A / 19A / 4A
25A / 21A / 4A
85% ± 5%
12V / 40Ah to 100Ah; Lead Acid
Output voltage drops; Auto reset
Regulated by PWM Controller
Output shuts down (Internal hot spot ≥ 100°C / 212°F);
Auto reset on cooling down
Temperature controlled fan (ON when internal hot spot ≥ 70°C / 158°F)
5 mm x 20 mm Glass Fuse / 250V, 6.3A, Time Delay Type
Bussmann: “GDC-6.3”; LittelFuse - “21806.3”
- 32V, 25A, Fast Acting
- In series with Positive Battery Terminal and output terminal marked
“Battery +”
- Within 7” of the Battery Positive Terminal
UL safety listed as “Information Technology Equipment Power Supply”
for USA (UL Standard ANSI/UL-60950-1) and for Canada (CSA Standard
CAN/CSA-C22.2 No. 60950-1)
FCC Part 15(B), Class B
- “IEC 320-C14” Inlet Connector on the unit
- Detachable Power Cord with: “IEC 320-C13” Connector on one end
& NEMA5-15P Plug on the other end
Terminal with Tubular Hole - Diameter 5mm / 0.2”
and set screw (#10, 24 TPI, 5/16” long)
Minimum AWG #10 as per NEC Table 310.15(B)(17)
- Ampacity 40A (1.25 times Maximum current of 25A)
- Conductor temperature rating of 75°C / 167°F
0°C to 40°C / 32°F to 104°F
185 x 240.5 x 61 / 7.28 x 9.47 x 2.40
1.6 / 3.4
12001-SEC-1223BBM-0713
To view a full selection of Samlex products visit our website at www.samlexamerica.com or contact us: 1(800) 561-5885 or [email protected]