Download JS-1200-545/DT – Digitally controlled charger

JS-1200-545/DT – Digitally controlled charger
DESCRIPTION
The JS-1200-545/DT is a microprocessor controlled battery charger. Digital communication line allows remote adjusting
of the charging current or voltage and alarms and live report of system values and alarms. It can be switched on/off by an
external TTL signal.The charger has more than 90% efficiency and compact dimensions thanks to active regulated ventilation.
Mechanically is the charger designed as a desk-top metal box. All connections, input connector, ouput terminals as well as
signalization and communication line are fitted on the front panel. It can be paralleled.
Available as power supply in various output parameters
TECHNICAL PARAMETERS
Input voltage
input frequency
Input current
Output voltage
Output current
Dielectric withstand
Insulating resistance
Communication
Output current report
On/Off command
Stand-by power consumption
180V - 260V AC (IEC 320 C14), active PFC
47 - 63 Hz
7Amax @ 230V AC
54,5A DC
26,7A
3000V AC input-output, 1500V AC input-cover
> 50MΩ
I2 C
0-10V
TTL
1W
ENVIROMENTAL CONDITIONS
Operating temperature
Humidity (non condensation)
Installation altitude
Enviroment
Ingress protection class
Weight
Dimensions
-10 to +50ºC
10 to 80% RV
do 2000m n.m.
non explosive
IP20
3kg
190x90x290mm (WxHxL)
TECHNICAL STANDARDS
Safety
EMC
WARRANTY
EN 60950-1
EN 61000-6-1 ed.2
EN 61000-6-3 ed.2
2 years
Phone.: +420 547 236 111, Fax: +420 547 236 112, E-mail: [email protected], www.bke.cz