Download Crank Pulley - 1st

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
Crank pully
Weight reduction is how we are able to increase horsepower. Each pound of weight removed from the crankshaft worth approximately 2.7HP and
the gains jump even more dramatically with forced induction, nitrous, VTEC and increased RPM's. Only 15-200Io of the gains form our pulleys come
form underdriving. The diameter of each of our crank pulley is reduced up to 200Io. We fully maintain all accessory output minimums like air
conditioning efficiency, power steering feel, and voltge even at idle with everything electrical an in the car. There are no adverse effects from using
any of our pulley versions. Bolt them on and forget about them, then just follow your vehicles normal maintenance schedule.
The second type are our crank pulley which are available in 3 versions. First is the underdrive crank pulley in
standard belt alyout. They drive all the accessories that were available in the car from the factory. This version is up to 2D0Ia smaller in diameter.
But more important is they are 6D-900Io lighter than the BEM pulleys they replace. It's another reason why we do all of the underdriving at the
crankshaft pulley to maximize the reduction in weight on the crank. Second are the stack diameter crank pulley, also in standard belt alyout. It is
designed to maintain alternator output at stock levels for car owners with big stereos or for audio
competitions where system voltage must maintain specified levels.For cars with superchargers it maintains the original level of boost form the
aftermarket supercharger kit. Third are the single belt conversions. This version was designed to drive only the alternator or alternator and water
pump. It is used for engine swaps or far the racer where only the alternator is being used. This version has the same percentage of underdirving as
the Ultra or Tuner S version but is 90- 95% lighter than the OEM pulley it replaces.
P/NO
DESCRIPTION
CARTON
PACK
cp.9001
honda h22a
10
cp.9002
honda b18
10
cp.9003
honda accord
10
cp.9004
honda civic fd06
10
cp.9005
nissan s14/s15 (3pcs/set)
10
cp.9006
nissan rb20/rb25
10
cp.9007
nissan z33 350z (3pcs/set)
10
cp.9008
mitsubishi evo123
10
cp.9009
mitsubishi evo789
10
cp.9010
subaru impreza version 789(2pcs/set)
10
cp.9011
toyota supra v6 3.0/jza80(3pcs/set)
10
cp.9012
toyota mrs/cellica
10
cp.9013
mitsubishi 4g93
10
cp.9014
toyota vios
10
cp.9015
ford mustang
10
12