Download LexCom Home Control

PDL Making Homes Smarter
PDL’s LexCom Home Control creates custom, ambient lighting throughout any home.
Not only will the home be beautifully lit, but it will also be responsive to the owners needs..
Easy to Install
Designed for ease of installation without the need for complete rewiring or special cables, they
operate just like conventional 2-wire 240V AC light switches. With integral dimmer and relay
controls, they can be installed into standard mounting accessories such as wall boxes and metal
brackets. The switches use secure RF radio signals for communication which greatly simplifies
2 and 3 way switching, as any switch can be enabled to control any other load in the home.
No Programming Required
Factory configured to work right out of the box, with On/Off control, and Dim Up/Down functionality
designed so that customers will instinctively know how to use it. System capability can be enhanced
through the use of configurable scene and timing functions, allowing different mood lighting to be
selected at the touch of a button. This simple configuration can be done by the installer on site,
and does not require the use of a computer.
Affordable for Every Customer
LexCom Home Control devices are surprisingly inexpensive, which has finally made intelligent
lighting control affordable. The use of advanced wireless technology reduces installation costs and
makes installation quick and easy in any home. It is also fully scalable allowing you to begin with
just one room with lower entry costs, and expand later to the whole home.
Beautiful on Any Wall
The sleek profile and elegant design of the PDL Modena styled switches fit beautifully in any home.
The use of interchangeable cover plates allows the home owner to choose any colour to match
their homes décor.
LexCom Home Control
LexCom Home Control – Wall Switches
These intelligent wall switches allow existing, 2-wire 240V AC wall switches to be replaced
directly with a wall switch containing LexCom wireless communication technology. They are able
to communicate with other LexCom Home Control devices using Radio frequency (RF) Wireless
messaging to form a network. The wall switches are 2-wire devices (240V AC Active and Load),
with no Neutral connection required. This enables the wall switches to be installed without any
changes to existing mains wiring at a wall switch. The buttons on the front of the wall switch
are able to control a load connected directly to the unit, and to control loads connected to other
LexCom Home Control devices. Each button can be configured to function as an on/off switch,
a dimmer (where applicable), a scene controller, as well as a number of other functions.
Electrical
Specifications
2-Wire Leading Edge
Dimmer Units
2-Wire Trailing Edge
Dimmer Units
2-Wire Relay Units
Supply Voltage
240V a.c. @ 50Hz
Min. Load Per Channel
25W Lamp or
0.25A Fan Motor
25W Lamp
25W, 0.1A
Max Load Per Channel
500W, 2A (Single Chan)
250W, 1A (Two Chan)
500W, 2A (Single Chan)
250W, 1A (Two Chan)
2000W, 8A
2A
2A
2A
-
2A
2A
-
8A
8A
8A
2A
4A
0.5W
0.5W
0.25W
12mA Chan 1
5mA Chan 2
15mA Chan 1
10mA Chan 2
10mA Chan 1
0mA Chan 2
Load Rating
Incandescent/Halogen
Iron Core LV Lighting
Electronic LV Lighting
Fan Motors
Fluorescent
Off State Power
Consumption
Off State Leakage Current
LexCom Home Control – Plug Adaptors
LexCom Home Control plug adaptor allows devices normally plugged into 240V AC GPO’s
to be controlled using the LexCom Home wireless technology. The plug adaptors are able to
communicate with other LexCom Home Control devices using RF wireless messaging and
form a network. LexCom Home Control plug adaptors plug into existing power outlets, and
the device to be controlled then plugs into the adaptor. No additions or alterations to existing
wiring are required.
Electrical
Specifications
Supply Voltage
Plug Adapter Leading
Edge Dimmer Units
Plug Adapter Trailing
Edge Dimmer Units
Plug Adapter
Relay Units
240V a.c. @ 50Hz
Max Load Per Channel
750W, 3A
500W, 2A
2400W, 10A
Load Rating
Incandescent/Halogen
Iron Core LV Lighting
Electronic LV Lighting
Fan Motors
Fluorescent
3A
3A
-
2A
2A
-
10A
10A
10A
2A
4A
LexCom Home Control – Remote Control
The LexCom Home Control remote control unit allows the control of LexCom Home Control
devices from a walk-around, hand-held unit. The remote control unit features 5 configurable
buttons (a Shift button doubles up to 10 functions), allowing sophisticated mobile scene
setting. The unit also features “Up”, “Down” and “All Off” buttons, an LCD Display, blue LED
backlighting, plus the ability to label each function button.
Electrical Specifications
RF Frequency
Transmitting Power
10mW
Typical range
20-25m
Maximum Range
Backlighting
Display
Batteries
Sales & Customer Service
Tel: 1300 PDLCOM (1300 735 266)
Fax: 1300 PDLFAX (1300 735 329)
[email protected]
www.pdl.com.au
www.lexcom.com.au
433.92 MHz
70m (free air)
Blue LEDs
LCD
2 x AAA