Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
DATASHEET DuraMAR 1000 ™ Rugged Mobile IP Router FEATURES BEST-IN-CLASS MOBILE ROUTING •Cisco 3200 Mobile Access Router (MAR) Technology •Wide Protocol Support: Mobile IP, OSPF, IP Multicast, IGMP, IP Policy Routing, IP Multicasting PIM, Cisco GMP, EIGRP-IP, RIP, IP Multicast Load Splitting, Cisco Discovery Protocol RUGGEDIZED MECHANICAL DESIGN •Designed to meet MIL-STD-810F (Rotary Aircraft/ Ground Vehicle) •IP67 Sealed Circular Connectors • Rain-Proof NEMA 4X Conduction-Cooled Chassis • Lightweight (7lbs) and Compact (8”x4”x6” L-W-H) • Wide Operating Temp Range: -40°C to 70°C • Spring-Loaded ATR-type Dagger Pins and Mounting Tray Brackets Enable Easy Installation ROBUST POWER SUPPLY •150 Watt Supply with Wide Input Range, Surge Protection and Galvanic Isolation •Intelligent Power Management and External Power Reset Switch POWER INJECTORS FOR REMOTE DEVICES •Power-Over-Ethernet (POE) [IEEE 802.3af] on 3 Fast Ethernet RJ-45 Ports •Power-with-Serial (PwS) on 3 Serial Ports •Eliminates Separate Power Supplies and Cables REMOTE NODE “BACKPACK” SUPPORT •External Modular Computing/Communication Nodes can be Mounted Remotely or on Top of DuraMAR to Support System Expansion (i.e. 802.11, Ethernet Switch, 1553, CPU) •Perpetual Radio and Functional Upgrade Support Without Having to Replace/Upgrade DuraMAR Router •RF Signal Strength and Heat Dissipation can be Optimized with Remote Nodes (Closer Proximity to Vehicle Antennas) PRODUCT DESCRIPTION The DuraMAR™ 1000 is a rugged Mobile IP (Internet Protocol) router designed for harsh mobile environments. Leveraging Cisco Systems’ industry standard IOS® software and mobile access routing (MAR) technology, the DuraMAR enables a wide range of new in-vehicle net-centric and situational awareness applications, from wireless Internet access to Voice over IP (VoIP) to streaming video surveillance and smart vehicle diagnostics. Front View Designed to global environment standards for vehicle/military grade electronics, the DuraMAR integrates a highly robust power supply and hardened enclosure isolated against voltage spikes, transients and harsh environmental stresses (shock, vibe, humidity, EMI/EMC) experienced onboard aircraft, naval and land vehicles. The unit’s power supply also incorporates intelligent power management circuitry to prevent adverse power conditions from disabling the router. LED status indicators for power, network and serial connections, as well as a console port and manual reset switch are located on the front panel. The rear panel includes a series of IP67 Ethernet and serial connectors. Rear View The unit’s compact chassis is conveniently designed for easy removal and upgrade, snapping into a mounting tray with spring-loaded dagger pins. The unit also integrates multiple Power-Over-Ethernet (POE) RJ-45 injector ports and Power with Serial (PwS) Connectors so that clean isolated power and signal are carried over a single standard Ethernet or serial cable. This eliminates the need for separate power cables or power supplies, while bringing new communications capabilities to legacy serial or Ethernet devices. Companion “nodes” can be mounted remotely or on top of the base DuraMAR unit to support cellular, 802.11, or custom functionality. Since these nodes are external to the DuraMAR chassis, they enable heat dissipation to be improved and RF signals to be strengthened (due to reduced analog antenna cable length), while providing a simplified upgrade path for future communications technologies. SPECIFICATIONS POWER •150 Watt Supply with 90 Watt Output available for External Devices (15 Watts per POE/PwS port) •Power Consumption: 18 Watts (typical) for DuraMAR; 2 to 15 Watts per Node POE/PwS Port used •Voltage Input Range: 9-36VDC (20-80VDC Option) •Surge Protection: 40J (RIA12 / EN50155 Compliant) •Galvanic Isolation: 1.5KV CONNECTORS •Sealed: IP67 Rated for Dust and Water Protection •Ethernet: One L3 and Two L2 E/FE Ports (w/ POE) •Serial: One Async port, Two Sync/Async Ports with Power; 1.5KV Dielectric Isolation on Auxiliary Serial Port •Router Console: 1 Serial port PHYSICAL •Dimensions: 8.37”x5.90”x4.17” L-W-H (DuraMAR); 8.37”x5.90x5.81” (w/CDMA node on top); 6.31”x5.30”x2.10” L-W-H (CMDA node only) •Weight: approx. 7lbs. (DuraMAR), 2-3lbs (node) •Mounting: Quick-Release Spring-Loaded Dagger Pins; No Tools Required for Removal/Installation from Brackets ENVIRONMENTAL •Designed to Meet or Exceed MIL-STD-810F / EN50155 / Standards (Temp, Shock, Vibration, Humidity) •Operating Temp: -40ºC to +70ºC (-40ºF to +158ºF) •Non-Operating Temp: -40ºC to +85ºC (-40ºF to +185ºF) •Immersion: Designed to meet NEMA 4X & 6 Compliance •EMI/EMC: Designed to MIL-STD-461E, EN50155