Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
AMERITHERM INC. TM Precision Induction Heating 1 & 2kW RF Power Supplies Compact & Light 17"W x 13"D x 5.25"H; 25 lbs Versatile • • • • for parts of many sizes and shapes two 3-language display suites serial communication option field-calibration capable Rugged • 100% solid-state, operates in environments up to 120°F Easy to Use • • • LCD readout built-in timer, stop-watch push-button RF power control Fast Operation • Heats most parts in just seconds HOTSHOT Free-Front with remote heat station HOTSHOT RF power supplies provide a compact alternative for heating parts that require a quick, clean source of heat. Two models are available: • 2 kW HOTSHOT: ideal for quick, non-contact heating of your parts, supplied with a convenient remote heat station, located up to ten feet from the power supply • 1kW HOTSHOT: available with either a remote heat station or an integrated, front panel heat station • Remote models also available ® with Free-Front configuration, with all utilities co-located at the back For maximum flexibility in heating parts of different sizes and composition, both models operate over a 150 to 400 kHz frequency range with excellent power control to under 10W resolution. The heating process is quick and clean; the part or material to be heated is placed inside an induction-heating coil made of copper tubing. The design of the heating coil and size of the remote heat station depend on the characteristics of the part being heated. The Ameritherm Applications Lab will assist you in determining the optimum coil design and heat station for your application. After the part is placed in the coil, it generally requires only seconds to achieve the target temperature without flame or gaseous exhaust. Power is controlled and monitored with the convenient front panel LCD and sealed touchpad. The length of the heating cycle can be easily controlled with a built-in digital timer, which can be set from 10 milliseconds up to 10,000 seconds (2 hours, 46 minutes). Excess heat is removed by a builtin water-cooling system, which connects to a heat exchanger or chiller for dissipating heat. With a rack-mountable 17" x 13" footprint, 5.25" (3U) height and weight of just 25 lbs., the HOTSHOT is a truly portable heat source for soldering, brazing, bonding, curing, catheter tipping, melting precious metals and for many other applications. While normally used with electrically conductive materials, the HOTSHOT can also be used to heat plastics and other nonconductive materials by utilizing a conductive metal susceptor for heat transfer. HOTSHOT power supplies are manufactured at our IS0 9001:2000 certified Scottsville NY facility. © 2005 Ameritherm Inc., 39 Main Street, Scottsville, NY 14546 USA www.ameritherm.com Tel: 585.889.9000 Fax: 585.889.4030 4110030b All information subject to change without notice AMERITHERM INC. TM Precision Induction Heating RF INDUCTION POWER SUPPLIES Specification RF Deliverable Power RF Terminal Power Frequency RF Coil Current AC Line Voltage AC Line Power AC Line Circuit Protection Water Cooling (System*) Flow Pressure Differential Temperature Power Factor HOTSHOT features a front panel programmable heating controller allowing the operator to pre-set up to 4 different heating profiles, each with up to 5 time/temperature steps. Two display language suites available: EN IT ES or EN DE FR. Models 1kW with integrated heat station 1kW with remote heat station 2kW with remote heat station Free-Front for any remote model (specified when ordering) 1kW 2kW units 1 1.2 150 - 400 300 117 / 220 1.6 15 / 7.5 2 2.4 150 - 400 400 220 3.3 15 kW kW kHz A max Vac ±10%, 1∅ kVA max A 0.4 0.75 g/m 40-80 40-80 psi 95 (34.6) 95 (34.6) ºF (ºC) max .78 .78 2 line x 16 character LCD; displays frequency, Front Panel Display power, setpoint, timer & fault descriptions Display Language Suite EN IT ES (default) or EN DE FR. Serial Communications (opt) via RS485: terminal mode or Modbus selectable** Timer Built in; settable from 10mSec to 10,000 seconds Heating Controller 4 programmable heating profiles, 5 steps per profile Power On/Off Rise/Fall Time <5 <5 ms Tune Time <10 <10 ms each activation Designed to Meet UL1012, EN61010-1, NFPA79 System Shipping Weight 50 (22.7) 50 (22.7) lb (kg) Dimensions 17x13x5.25 (432x330x133) WxDxH in(mm) Reference Coil Dimensions 0.7,5 (18,127) ID, length in(mm) * includes power supply and heat station, typical **future Removable screw terminal connections AC power switch/breaker Options and Accessories Water-to-air heat exchanger Optical pyrometer (closed-loop temperature control) Footswitch Pendant Station Serial Communication (with RS232/485 converter) Water outlet Free-Front® (specified when ordering) colocates utilities at rear, freeing workspace at the front. Also simplifies utilities routing for rack-mounted units. Water inlet AC line inlet The standard remote heat station (shown at front above) measures 4” W x 8” D x 4” H”, weights just 8 lbs. and handles most HOTSHOT heating applications. Some applications may require the extended remote heat station (shown behind standard model) which measures 4” W x 10.5” D x 4” H and weighs 10 lbs. © 2005 Ameritherm Inc., 39 Main Street, Scottsville, NY 14546 USA www.ameritherm.com Tel: 585.889.9000 Fax: 585.889.4030 4110030b All information subject to change without notice