Download d1000/d1100 series

International
Fiber
Systems
Incorporated
Installation/Operation Instructions
and Warranty Information for Models...
D1010
D1010WDMA
D1010WDMB
D1020
D1025
D1110
D1111
D1110WDMA
D1110WDMB
D1111-ISO
D1120
D1125
D1010-R3
D1010WDMA-R3
D1010WDMB-R3
D1020-R3
D1025-R3
D1110-R3
D1111-R3
D1110WDMA-R3
D1110WDMB-R3
D1111-ISO-R3
D1120-R3
D1125-R3
SERIES DESCRIPTION
This operating guide describes a family of International Fiber Systems, Inc. (IFS) fiber optic modems.
Not all modems have all of the features listed in this guide.
The D1000/D1100 series is designed to function as a fully transparent fiber optic transceiver for RS232
or RS422 equipment. The units can be used in a point-to-point configuration or in conjunction with the D2100
series modules to form a daisy chain configuration.
PART NUMBER DESCRIPTION
D1000/D1100 SERIES
D1010/D1110
D1010/D1110-24
D1010/D1110-R3
D1010/D1110WDMA
D1010/D1110WDMA-24
D1010/D1110WDMA-R3
D1010/D1110WDMB
D1010/D1110WDMB-24
D1010/D1110WDMB-R3
D1020/D1120
D1020/D1120-24
D1020/D1120-R3
D1025/D1125
D1025/D1125-24
D1025/D1125-R3
D1111
D1111-24
D1111-R3
D1111-ISO
D1111-ISO-24
D1111-ISO-R3
RS232/RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE
RS232/RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, +24 VDC
RS232/RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, RACK MOUNT
RS232/RS422 TRANSCEIVER, 850/1300 nm, 1 FIBER, MULTIMODE
RS232/RS422 TRANSCEIVER, 850/1300 nm, 1 FIBER, MULTIMODE, +24 VDC
RS232/RS422 TRANSCEIVER, 850/1300 nm, 1 FIBER, MULTIMODE, RACK MOUNT
RS232/RS422 TRANSCEIVER, 1300/850 nm, 1 FIBER, MULTIMODE
RS232/RS422 TRANSCEIVER, 1300/850 nm, 1 FIBER, MULTIMODE, +24 VDC
RS232/RS422 TRANSCEIVER, 1300/850 nm, 1 FIBER, MULTIMODE, RACK MOUNT
RS232/RS422 TRANSCEIVER, 1300 nm, 2 FIBERS, MULTIMODE
RS232/RS422 TRANSCEIVER, 1300 nm, 2 FIBERS, MULTIMODE, +24 VDC
RS232/RS422 TRANSCEIVER, 1300 nm, 2 FIBERS, MULTIMODE, RACK MOUNT
RS232/RS422 TRANSCEIVER, 1300 nm, 2 FIBERS, SINGLE MODE
RS232/RS422 TRANSCEIVER, 1300 nm, 2 FIBERS, SINGLE MODE, +24 VDC
RS232/RS422 TRANSCEIVER, 1300 nm, 2 FIBERS, SINGLE MODE, RACK MOUNT
RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, HIGH SPEED
RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, HIGH SPEED, +24 VDC
RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, HIGH SPEED, RACK
MOUNT
RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, SIGNAL-CASE ISOLATION
RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, SIGNAL-CASE
ISOLATION, +24 VDC
RS422 TRANSCEIVER, 850 nm, 2 FIBERS, MULTIMODE, SIGNAL-CASE
ISOLATION, RACK MOUNT
International Fiber Systems, Inc.
16 Commerce Road • Newtown, Connecticut 06470 USA • Tel: 203.426.1180 • Fax: 203.426.3326
D1010/1110 Rev: 1 05/26/98
COMPATIBILITY CHART
TRANSCEIVER
COMPATIBLE TRANSCEIVER
D1010/D1110
D1010/D1110-24
D1010/D1110-R3
D1010/D1110WDMA
D1010/D1110, D1010/D1110-24, D1010/D1110-R3, D2100, D2100-24
D1010/D1110, D1010/D1110-24, D1010/D1110-R3, D2100, D2100-24
D1010/D1110, D1010/D1110-24, D1010/D1110-R3, D2100, D2100-24
D1010/D1110WDMB, D1010/D1110WDMB-24, D1010/D1110WDMB-R3,
D2100WDM, D2100WDM-24
D1010/D1110WDMB, D1010/D1110WDMB-24, D1010/D1110WDMB-R3,
D2100WDM, D2100WDM-24
D1010/D1110WDMA, D1010/D1110WDMA-24, D1010/D1110WDMA-R3,
D2100WDM, D2100WDM-24
D1010/D1110WDMA, D1010/D1110WDMA-24, D1010/D1110WDMA-R3,
D2100WDM, D2100WDM-24
D1020/D1120, D1020/D1120-24, D1010/D1120-R3, D2120, D2120-24
D1020/D1120, D1020/D1120-24, D1010/D1120-R3, D2120, D2120-24
D1020/D1120, D1020/D1120-24, D1010/D1120-R3, D2120, D2120-24
D1025/D1125, D1025/D1125-24, D1025/D1125-R3, D2125. D2125-24
D1025/D1125, D1025/D1125-24, D1025/D1125-R3, D2125. D2125-24
D1025/D1125, D1025/D1125-24, D1025/D1125-R3, D2125. D2125-24
D1111, D1111-24, D1111-R3, D2100
D1010, D1010-R3, D1110, D1110-R3, D1111, D1111-R3, D2100
D1010, D1010-R3, D1110, D1110-R3, D1111, D1111-R3, D2100
D1111-ISO, D1111-24, D1111-ISO-R3
D1111-ISO, D1111-24, D1111-ISO-R3
D1111-ISO, D1111-24, D1111-ISO-R3
D1010/D1110WDMA-R3
D1010/D1110WDMB
D1010/D1110WDMB-R3
D1020/D1120
D1020/D1120-24
D1020/D1120-R3
D1025/D1125
D1025/D1125-24
D1025/D1125-R3
D1111
D1111-24
D1111-R3
D1111-ISO
D1111-ISO-24
D1111-ISO-R3
POWER CONNECTIONS
a. Surface-mount Modules:
D1000/D1100 SERIES*
PIN 1
PIN 2
+ 12 VDC
GROUND
*D10XX/D11XX-24 MODELS ONLY
PIN 1
PIN 2
+ 24 VDC
GROUND
b. “–R3” Modules:
All “-R3” modules receive power from the back plane of the R3 rack. Insert the “-R3” module into any
available R3 rack slot such that the female 3-pin connector on the back of the module engages the
companion male connector of the back plane. The red power LED will glow when voltage is applied to
the module.
International Fiber Systems, Inc.
16 Commerce Road • Newtown, Connecticut 06470 USA • Tel: 203.426.1180 • Fax: 203.426.3326
D1010/1110 Rev: 1 05/26/98
DATA CONNECTIONS
SURFACE MOUNT ONLY
D1000/D1100 SERIES
DATA INPUT
DATA OUTPUT
RS232
RS232
PIN 7
PIN 8
RS422
PIN 6
PIN 7
DATA INPUT
SIGNAL GROUND
(Bi-phase or Manchester)
- DATA INPUT
+ DATA INPUT
PIN 2
PIN 3
RS422
PIN 4
PIN 5
SIGNAL GROUND
DATA OUTPUT
(Bi-phase or Manchester)
- DATA OUTPUT
+ DATA OUTPUT
RACK MOUNT (R3) ONLY
D1000/D1100 SERIES
DATA INPUT
RS232
RS232
PIN 5
PIN 7
RS422
DATA OUTPUT
DATA INPUT
SIGNAL GROUND
(Bi-phase or Manchester)
PIN 4
- DATA INPUT
PIN 5
+ DATA INPUT
PIN 1
PIN 6
RS422
PIN 2
PIN 3
DATA OUTPUT
SIGNAL GROUND
(Bi-phase or Manchester)
- DATA OUTPUT
+ DATA OUTPUT
NOTE: The D1000/D1100 series can be used to transmit RS232 or RS422 but not simultaneously.
INDICATORS
RED
YELLOW
GREEN
POWER
DATA RECEIVE
DATA TRANSMIT
FIBER OPTIC CONNECTION
International Fiber Systems, Inc.
16 Commerce Road • Newtown, Connecticut 06470 USA • Tel: 203.426.1180 • Fax: 203.426.3326
D1010/1110 Rev: 1 05/26/98
Select a good quality fiber optic cable and attach a ST style fiber optic connector using the connector
manufacturer's recommended procedures. Connect the fiber optic cable to the ST connectors marked "XTMR"
on the first D1000/D1100 series module to the ST connector marked “REC” on the next D1000/D1100 series
module. In a similar fashion, Connect the ST connect the fiber optic cable to the ST connector marked and
"REC" on the first D1000/D1100 series module to the ST connector marked “XTMR” on the second
D1000/D1100 series module.
NOTE: When using a “WDM” fiber optic module (single fiber unit) simply connects the fiber optic between the
two modules at the ST connector marked “OPTICAL CABLE.”
MOUNTING STAND ALONE UNITS
Hold the D1000/D1100 series module against the mounting surface and mark the locations of the keyhole
slots on the rear mounting brackets. Install mounting screws into keyhole marks, allowing leeway under the
screw heads for the box to be mounted. Mount the brackets over the screws, slide, and tighten.
International Fiber Systems, Inc.
16 Commerce Road • Newtown, Connecticut 06470 USA • Tel: 203.426.1180 • Fax: 203.426.3326
D1010/1110 Rev: 1 05/26/98
D1010/1110
RS232/RS422 TRANSCIEVER
8
RS232
XTMR
RS422
RS422
REC
ifs
International
Fiber
+ DATA IN
7
- DATA IN
6
+ DATA OUT
5
- DATA OUT
4
RS232 OUT 3
2
+ 12 VDC
Systems
Incorporated
1
} RS232 Input
} RS422 Input
} RS422 Output
} RS232 Output
Black wire
Black with white stripe
POWER
203.426.1180
Duplex multimode
fiber optic cable
}
To D1010/1110 or
D2100 series module
Note: To verify the number of fiber optic cables, and fiber optic cable types
of other models within this series, check the compatibility chart and part
number description sections within this manual.
C-1232 REV
Ground
Ground
+Data
RS422 Input
-Data
+Data
RS422 Output
-Data
}
}
Power from
R3 backplane
RS232 Out
}
}
RS232 Input
RS232 Output
}
Ground
Ground
+Data
Duplex multimode
fiber optic cable
To D1010/1110 or
D2100 series module
Note: To verify the number of fiber optic cables, and fiber optic cable types
of other models within this series, check the compatibility chart and part
number description sections within this manual.
International Fiber Systems, Inc.
LIFETIME WARRANTY
INTERNATIONAL FIBER SYSTEMS, INC. (IFS) warrants to the
original purchaser that all IFS manufactured products shall be free from
defects in material or workmanship at the time of shipment.
LABOR AND PARTS: From the date of purchase to the original user, if
this product is determined to be defective, IFS will repair or replace the
product at no charge.
Our obligation under this warranty is limited only to the repair or
replacment of any of our products, providing said products are used within
the specified ratings and applications, and said products are applied in
accordance with good engineering practices, and providing said products are
proved by our examination to be defective.
This warranty does not extend to any IFS products which have been subject
to acts of God, accident, misuse, abuse, neglect, improper application or
installation, improper operation or maintenance, connection to an improper
voltage supply or to materials which have been altered or repaired outside of
an authorized IFS factory repair center.
This warranty shall constitute the fulfillment of IFS’ liability. IFS shall not
be liable for any incidental or consequential damages or breach of any
express or implied warranty on this product, except to the extent prohibited
by applicable law. Any implied warranty of merchantability or fitness for a
particular purpose of this product is limited in duration to the duration of
this warranty.
Exclusions:
Power transformers, batteries, or cosmetic damage.
16 COMMERCE RD • NEWTOWN, CT 06470 • TEL: 203.426.1180 • FAX: 203.426.3326