Download lps-112 cc power supply - LED-NER

L P S - 1 1 2 C C P O W E R S U P P LY
This power supply with microprocessor is a
technological masterpiece!
It incorporates an exclusive dual PWM dimming device.
.
.
Main dimming with potentiometer, 0/5V,
0/10V or PWM (DMX for example)
Temporary dimming with push-button
This allows for example to control the lighting
in a home automation system, and to take
control at any time without changing the settings on the main program.
Recommended applications
.
.
.
.
(Ref.: ALM311)
SPECIFICATIONS
High efficiency SMPS
Supply of LEDs in constant current
Integration in fixtures
Continuous power recommended: 12W
Output specifications: 2 to 48V ; 150mA to 1A4
Miniature device easy to put behind furniture or paintings
Puissance d’entrée
Input Power
Can be integrated into a standard wall box
Signaux d’entrée
Input signals
Adjustable current in 10 steps : 150mA, 250mA, 350mA,
425mA, 500mA, 600mA, 700mA, 850mA, 1A, 1A4.
Input specifications: 90 to 260V AC ; 0,1A
Thermal protection
Dimming by pulse width modulation(PWM) for a
perfect LED dimming
Disengageable automation controls 0/10V
or DMX
Minimum PWM Ratio: 1% High Frequency
Puissance de sortie
Output power
Signaux de sortie
Output signals
Control voltage of the dimming with potentiometer internal, external, entry 0/5V or 0/10V
Temporary dimming with push-button ; Cycle time min/max :
3 sec ; increment and decrement by pressing the button
Temporary dimming via push button can also work in
PWM mode
PWM input and output compatible with EPWM to control
more powerful power supplies.
Cable lengths: power cable 18cm ; signals 30cm
CE Marking
Basic operating
Use with push-button or capacitive
The Push Button provides access to two functions:
- ON / OFF by pressing <0.3 sec, in this case, the
position "ON" matches the power determined by the
integrated potentiometer.
Dimming is done through an integrated potentiometer.
A choice of 5 colored shafts included with the device, will help to indicate the controlled color, in
a case of RGB for example.
- Dimming by pressing> 0.3 s, the power gradually
increases and remains at maximum; releasing and
pressing again, the power decreases to zero.
The capacitive sensor is ideal for integration.
Connection to a PLM-DC1R wall panel
CONTROL IT YOURSELF WITH A REMOTE !
Simply connect the receiver RF-4C-LPS using the 3-wire cable included with the device. You can connect up to 4 power supplies on the same
receiver.Dimming and ON/OFF functions are accessible from both the wall panel and remote control, or by remote control only ...
The LPS-112 CC power supply and the PLM-DC1R wall panel can be integrated into a standard 67mm diameter wall box.
The button on the panel is both rotating and push-button.
The potentiometer allows to set an average value of the desired light
A short press on the button turns the light on or off
A long press allows a temporary modification of the light power, without changing the potentiometer’s setting
Use as Master - Slave
This wiring allows you to connect multiple power supplies to have exactly the same dimming everywhere. The
first power supply is set as "master", it means that it is going to be the one which will determine the dimming. The
second power supply is connected just by the green wires (0) and purple (PWM signal). It is possible to connect
up to 10 slave power supplies.Warning: All "+" on power supplies must not be connected together.
The principle of controlling is the same for the constant current LPS-112 CC power supply and the constant voltage
LPS-118 CV24 power supply. Therefore it is possible to combine the two types of power supplies in order to obtain
the same dimming with a strip and power LEDs.
DMX controlling with INT-DMX4 » interface
It is possible to connect from 1 to 4 power supplies to a "INT-DMX4" interface. Dimming of one
channel in white to WRGB or dimming of 4 areas.Note that it is possible to connect the pushbuttons on the power supply using the 3-wire cables included. Thus, we can change the dimming
issued by the DMX signal.Once a sufficiently different DMX dimming is detected, it takes
control.Warning: All "+" on power supplies must not be connected together.
Dimensions