* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Power Bank User`s Guide
Survey
Document related concepts
Power engineering wikipedia , lookup
History of electric power transmission wikipedia , lookup
Voltage optimisation wikipedia , lookup
Opto-isolator wikipedia , lookup
Buck converter wikipedia , lookup
Alternating current wikipedia , lookup
Power electronics wikipedia , lookup
Gender of connectors and fasteners wikipedia , lookup
Mains electricity wikipedia , lookup
Rechargeable battery wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Power over Ethernet wikipedia , lookup
Charging station wikipedia , lookup
Electrical connector wikipedia , lookup
Transcript
Power Bank User’s Guide Introduction The Power Bank is practical and easy to use and can be easily charged by Global Solar Energy, Inc. (GSE) solar products. It is compatible with many mobile phones, PDAs, digital cameras and many other devices by using the specialized connectors, making it a versatile travel companion. In addition, the 12V CLA cable nearly completes the universal connectivity by enabling small electronics loads (less than ~3.5Watts) to be operated through the customer-provided male CLA adapter. CLA will not operate loads that are rated higher than 3.5 watts. Therefore, this battery bank will typically not work with many of smart phones, PDAs, hand-held computers, pocket PCs, unless they are listed in the compatibility section. Please read this User’s Guide carefully before using the Power Bank. The suppliers assume no responsibility for any damages that may happen with the improper operation of this product. Contact your personal device supplier to ensure compatibility before connecting. 1. Product and Accessories No. Names Quantity Remarks 1 Power Bank 1 pc. Figure 1 2 100-240VAC Wall Charger 1 pc. 3 CLA Auto Charger 1 pc. 4 DC connector for digital camera 6 pcs./ set Figure 5 5 Universal cable for camera 1 pc. Figure 6 6 Universal adaptor for Mobile phone and PDA 1 pc. Figure 4 7 Mobile phone cable 5 pcs. Figure 7 8 PDA cable 2 pcs. Figure 7 9 12V CLA cable 1 pc Figure 8 10 GSE Adapter Cable 28001 1 pc. Figure 9 11 GSE Adapter Cable 28002 1 pc. Figure 10 12 User guide 1 PC Note: Figures are for reference only and are subject to change without notice 1 2. Technical Parameters Items Capacity of Built-in Battery Power bank output voltage Power bank max output current Power bank nominal input voltage / current Adaptor output voltage Adaptor output current Power bank dimensions Power bank net weight Safety certified Parameters Remarks 3.6 V 2600mAh Li-ion battery DC: 5.2 V/ 6.2 V/ 7.2 V Adjustable 1800mA DC 4.8-5.2 V / 400 – 600mA DC 5.2 – 13 V 15- 700mA 102mm * 64mm * 26mm 167 g CE / FCC 3. Illustration of the Product and Functions Figure 1 (Power Bank Main Unit) Figure 2 When TIP is accordant with “+”, DC connector is inner positive and outer negative 2 Figure 3 When TIP is accordant with “-”, DC connector is inner negative and outer positive Figure 4 Universal Adaptor for Mobile Phone / PDA Figure 5 DC Connectors for Digital Cameras Figure 6 Universal Cable for Digital Cameras Figure 7 Mobile Phone / PDA cable 3 Figure 8 Step-up cable for 12V CLA Figure 9 GSE Adapter Cable 28001 Figure 10 GSE Adapter Cable 28002 4 4. General Operation Methods 4.1. Before using the power bank, check the capacity of the power bank battery: connect the 3.5 mm DC connector digital camera or mobile phone / PDA adaptor to the DC jack of the power bank. Then switch the voltage to the DC 5.2 V and press the battery capacity indicator button. The table below will explain the battery capacity remaining for your reference. Indicator Display 1 red LED 1 red LED, 1 green LED 1 red LED, 2 green LED 4 LED Capacity 30% 50% 80% Full Note: The Battery Capacity indicator only works if 5.2V is selected and a plug is inserted into output jack. 4.2. If the low battery indicator lights up during work mode, recharge the power bank: connect the DC connector of the travel charger or car charger to the power bank to commence charging. When charging, the charge indicator lights up and will fade out automatically once charging is complete. It is advisable to charge overnight before using the first time. 4.3. Charging a digital camera a. Select the right size DC connector for your digital camera. b. Correctly connect DC connector to digital camera. If the camera charging jack is inner positive and outer negative, a “+” symbol on the DC connector should be accordant with the “TIP” symbol on the digital camera cable (see Figure 2); If the camera charging jack is inner negative and outer positive, a “-” symbol on the DC connector should be accordant with the “TIP” symbol on digital camera cable (see Figure 3). c. Select the voltage required by the digital camera, i.e. 5.2 V, 6.2 V or 7.2 V. d. After Connecting the DC connector to the digital camera, insert the digital camera cable to the power bank’s DC jack to commence charging. WARNINGS: 1. Please ensure that the connection between the digital camera cable is correct as the wrong connection will damage the connected devices. 2. Do not push the voltage switch when charging devices, the connected device may be damaged. 4.4. Charging a mobile phone / PDA a. Select the right size cable that the mobile phone / PDA requires. b. Connect the mobile phone / PDA cable to the universal adaptor. c. Switch the voltage to DC 5.2 V. d. Connect the mobile phone / PDA connector to the mobile phone / PDA and connect DC connector to the output jack of the battery bank. WARNING: Do not push the voltage switch when charging the mobile phone or PDA, or the connected device may be damaged. 4.5. Charging devices through the CLA a. Select the 12V CLA Cable (Figure 8) b. Connect the CLA adapter for your cell phone / PDA to the CLA cable receptacle c. Switch the voltage to DC 5.2V. d. Connect the 12V CLA cable to the output jack of the battery bank 5. Special Considerations When Utilizing Solar for Charging Battery 5.1. Unfold and place the Solar Panel in a sunny location 5.2. Tilting or propping the module towards the sun reduces the charge time. 5 5.3. Batteries are not intended for use at temperatures higher than approximately 45C (122F) or below 0C (32F). Be sure to place the Battery Bank in the shade during charging to avoid overtemperature and damage. 5.4. The attachment from the GSE solar module can be made using a 5.5mm OD, 2.1mm ID barrel plug adapter. To enhance this connectivity, GSE offers: a. the GSE adapter cable #28001 [See Figure 9] to go from 2-prong SAE connector to barrel plug, and b. the GSE adapter cable #28002 [See Figure 10] to adapt from a 2.5mm ID to a 2.1mm ID barrel plug. 5.5. Estimated Charging times are shown in the table below for charging the Battery Bank with different sizes of Solar Product. Charging Method EstimatedCharging Time SunlinQ12 Solar Module* 4-6 hours SunlinQ6.5 Solar Module* 7-8 hours ~6V, Quarter cell Solar Module (e.g. ScotteVest cape) 10-15 hours 100-240VAC Wall Charger 7-8 hours 12VDC* 7-8 hours *Assumes charged through the CLA Adapter provided for best efficiency Note: Charge times assume that the module is sitting in direct sunlight and tilted toward the sun. 6. Precautions 6.1. 6.2. 6.3. 6.4. Keep this product in a dry place. Never place or use the product in wet or dirty conditions. Never throw this product into a fire. Never throw or drop this product to avoid causing damages. If you do not plan to use the product, please disconnect digital camera cable or 3.5 mm DC connector of universal adaptor from the power bank. The power bank will change to power saver mode to conserve the battery. 6.5. If battery level of charge is less than ~10%, the internal controller automatically switches to Power Saver mode (i.e. trickle charging). To reset, assuming Low Power Light is on, disconnect load, disconnect and reconnect the input plug, and charge for 15-30 minutes prior to reconnecting load. 6.6. Never attempt to alter or disassemble the product. If there is a problem with the product please contact your dealer for further assistance. 7. POWER BANK COMPATIBILITY As described above, the Power Bank is compatible with many mobile phones, PDAs, digital cameras and many other devices by using the optional charger connectors, making it a versatile travel companion. In addition, the 12V CLA cable nearly completes the universal connectivity by enabling small electronics loads (less than ~3.5Watts) to be operated through the customer-provided male CLA adapter. Please see the following links for helpful CLA attachments for your electronics: www.belkin.com www.ziplinq.com www.thesupplynet.com Warning: Be sure to check the compatibility of your electronics prior to attaching to Power Bank to avoid any possible damage. Contact your electronic supplier first. Adaptor Designation SIM C55 MOT V60 NKI6110 ERIT68 SAM E700 Compatibility With Siemens Cell Phones Motorola Cell Phones Nokia Cell Phones Ericsson Cell Phones Samsung Cell Phones 6 PALM 505 PDA IPAQ PalmOne Tungsten and Zire series handhelds HP iPAQ series, Asus MyPal series, Toshiba e800, Mio 168 Pocket PC Phones and imate Pocket PC Phones 12V CLA Various products through customer-supplied CLA (which require less than 3.5 Watts) The cell phone manufacturers with a direct-connection adapter are noted above and the specific listing of compatibilities is shown below. If your cell phone is not listed, then a 12V CLA adapter or one of the USB adapters may still be able to operate : 1.SIM C55: Siemens C55/S55/SL55/M55/A55/A56/C56/CT56/S56/C60/A60/C62/MC60/S57/2128/CF62/CFX65/CX65/CX70/CX70 Emoty/SF65/SK65/SL65 2.ERI T68: Ericsson ERIT28/T28Word/A26/8S/A2638SC/T20S/K600/29S/T39/R320S/R380S/R520M/T60/T61/T20/R20/R278/T68/T65/T6 6/T300/T310/T610/T316/T616/T630/Z200/A2628/T500/T600/T400/P800/T618/T312/T62/TF500i/K700i/P800/P900/P9 10/S700i/T100/T200/T230/T68i/V800/Z1010/Z200/Z500/Z600/T39M/R600/T68# 3.NKI 6110: Nokia NOK6110/5110/6162/6150/6160/6210/6310/6138/6650/6200/6500/5510/6510/6600/6220/5100/6100/6108/6590/6610 i/6610/6630/6670/6800/6820/5510/5100/5140/7110/7210/7650/7700/7270/7260/7600/7280/7250/7250i/7610/3330/33 10/3320/3360/3390/3510/3650/3200/3585/3570/3588i/3315/3210/3100/3105(CDMA)/3600/8210/8310/8250/8810/885 0/8290/8260/8279/8890/8855/8260/8910/8910i/9210i/9300/9500/2300/1261/N-Gage/N-Gage QD; 4.SAM E700: Samsung A288/A200/A300/A388/A400/A408/N200/N288/R200/R210S/A800/S300/V200/V205/V208/5CH200/A308/C100/R225/ R235/A530/V206/E105/X100/X600/E700/X105/T100/T108/T208/T508/N500/N600/R220/N620/N628/E820/X450/E80 0/E400/E600/E710/P400/P510/C110/D410/E300/E310/A500/C200/E330/N400/P100/Q200/S300M/T410/T500/V100/ X100/X120/X400/X430/X460 5.MOT V60: Mototola V60/66/I85/I90C/I100/I500/I30V120/V70/V200/P280/270C/V60C/V60I/T721/T722/V120T/V120C/V120X/V120E/V60C /V60I/2800/V500/V600/V525/V60t/V300/I90C/I80C/A835/A920/A925/T720/V547/V550/V620/V80/V980/C975/C980/T 720i/E398/MPX/MPX220 Reference Info 1. The maximum input voltage to the Power bank is 15V 2. CLA input cable (which reduces the input voltage to match the battery voltage) to the Power bank has an input rating of 12-24V but withstands 26V (i.e. the Voc of OEMs and P3s (except for P315W)) 3. The efficiency of the CLA is ~75% 4. The 12VCLA cable will not operate loads that require more than 300 mA of current (~3.5 Watts at 12V) 7