Download DELTA reflex Motion Detectors, IP55

© Siemens AG 2008
DELTA Switches and Socket Outlets
DELTA reflex Motion Detectors, IP55
Unpack, connect, done no further work required
A key feature of the DELTA reflex motion detector IP55 is the precision with which its values
can be preset compared to standard motion detectors, which are set over potentiometers. So
there is no need to go back and adjust the devices. Convenient mounting: quick and easy
wiring in the terminal box. And then simply
plug in the motion detector. Commissioning of
the motion detector is automatic.
The DELTA reflex motion detector IP55 is available for two different sensing ranges: 120° and
290°. The 290° version is also available with remote control. A key feature of the new DELTA
reflex motion detector IP55 is its particularly attractive design.
DELTA
www.siemens.com/delta
Benefits
• Instant commissioning
• Preset standard mode with 2 min delay time
and 7 lux brightness value
• Precise adjustment of values for twilight and
delay time, so no need to keep going back to
a site to readjust the device
• Convenient mounting – the motion detector
simply plugs into the terminal box
• Automatic test mode after initial application
of voltage
• Change preset brightness values and delay
times with a simple touch of the button
• Flexible use: suitable for wall, ceiling or corner installation
• Attractive price-performance ratio
• Attractive design
• Available in titanium white and anthracite
• Additional functions over remote control
with the 290° IR version
© Siemens AG 2008
Motion Detectors
DELTA reflex motion detectors, IP55
Overview
Installation steps
1. Installation and wiring of terminal box
In the first step, the terminal box is mounted. Wiring the device
couldn't be easier.
2. Plug in the motion detector
In the second step, the motion detector is simply plugged into
the terminal box. The four connecting pins establish the connection between the motion detector and connecting cables.
3. Fixing the motion detector
In the third step, the motion detector is screwed to the terminal
box. This ensures degree of protection IP55. Screw-fixing the
motion detector helps prevent unauthorized removal or theft.
One, two, three ... and done
Three installation steps - that's all it takes and the motion detector is mounted and ready for use.
Commissioning the motion detector
The DELTA reflex motion detector is immediately ready for use:
• As soon as the power is connected and the initialization phase
has run for approx. 30 s, test mode starts automatically.
• After 10 min. the detector automatically switches to standard
mode with preset 2 min. delay time and a twilight value of
7 lux.
• It is also possible to interrupt the test mode and switch directly
to standard mode. To do this, simply press one of the two
pushbuttons on the motion detector or the green button on the
remote control (only for 290° IR).
Done!!!
2
Motion Detectors
© Siemens AG 2008
Simple changing of motion detector values
The values of the motion detector can be changed quickly and
easily using the two pushbuttons located behind the lens.
Operation of detector:
• Briefly press left pushbutton S1:
Stores a user-definable brightness value
• Briefly press right pushbutton S2:
Stores a user-definable delay time between 5 s and 30 min
• Left pushbutton S1 > 2 s:
Switches between brightness-dependent mode (normal
mode) and brightness-independent mode (day mode)
• Right pushbutton S2 > 2 s:
Switches between normal mode with delay time and pulse
mode
• Both pushbuttons > 3 s:
Activates test mode
The motion detector can be installed in three different ways
Wall mounting
Ceiling mounting
Inner corner and outer corner mounting
Setting and reducing the sensing range
The sensing range can be changed by turning the lens ±30° to
the left or right. The sensing range can be changed by adjusting
the swivel arm.
The motion detector is fitted with a cover plate that can be used
to limit the sensing range. To do this, the cover plate needs to be
cut out according to your requirements.
Cutouts for setting the sensing range
The sensing range can be limited by cutting out the cover plate to suit
your requirements
Motion Detectors
3
© Siemens AG 2008
Remote control for 290° IR motion detector
The 290° IR motion detector supports remote control. The remote control is included in delivery with the 290° IR motion detector and offers the functions listed in the table.
Direct selection pushbuttons
Vacation function / Absent
The vacation function is a permanently stored ON/OFF profile and simulates presence. The
ON/OFF profile is activated for approx. 4 hrs. as soon as it is dusk.
Light 4 hrs. ON
Switches the motion detection off and the light is switched continuously ON for 4 hrs.
Continuous OFF
The light is permanently OFF, the motion detection is disabled.
Test pushbutton
Enables test mode for 10 min (brightness-independent, 1 s ON and 2 s OFF).
Exit the direct selection function
Standard mode
Actuating this pushbutton exits the functions of the blue pushbuttons and reactivates the previously set operating mode.
Function only in conjunction with the
PROG pushbutton
Save brightness/twilight value
With this function, the stored brightness value is overwritten by the value currently being measured by the sensor.
Brightness-independent
day mode
The motion detector is enabled during the day - independent of the actual brightness.
Setting the delay time (starting and Using this function, you can program an individual delay time between 5 s and max. 30 min.
stopping the attendance recording)
4
Motion Detectors
10 min. delay time
This function can be selected when the motion detector is in the "individual setting" (standard
mode) or in brightness-independent day mode.
Pulse mode
Pulse mode 1 s ON / 9 s OFF. Application options, e.g. for stairwell time switch, door bells.
Programming pushbutton
It is necessary to activate the programming pushbutton before programming the functions of
the yellow pushbuttons.
Reset pushbutton
The Reset pushbutton can be actuated in any operating mode (even continuous OFF) and
returns the motion detector to its factory settings (7 lux / 2 min delay time).
© Siemens AG 2008
Technical specifications
DELTA reflex motion detector
120°
290°
290° IR
• Titanium white (similar to RAL 9010)
5TC7 210
5TC7 212
5TC7 214
• Anthracite
5TC7 211
5TC7 213
5TC7 215
• Remote controllable, incl. remote control
--
--
4
• Degree of protection
IP55
IP55
IP55
• Sensing range
120°
290°
290°
• Connected load
1000 W 5 AX
2500 W 10 AX
2500 W 10 AX
• Screw terminals for solid conductors 1 ... 4 mm², max. 2 x 2.5 mm²
stranded conductors (only with end sleeves) 1 ... 2.5 mm², max. 1 x 2.5 mm²
4
4
4
• Sensing range at 22 °C
10 m
16 m
16 m
• Mounting height
2 ... 4 m
2 ... 4 m
2 ... 4 m
• Wall or ceiling mounting
4
4
4
• Surface mounting design: wiring of the detector is quick and easy, it is then sim- 4
ply plugged in
4
4
• Mounting with special base
4
4
4
• Incandescent lamps
1000 W
2500 W
2500 W
• HV halogen lamps
1000 W
2500 W
2500 W
• Fluorescent lamps
8 x 58 W
20 x 58 W
20 x 58 W
• Energy-saving lamps
max. 4 units
max. 8 units
max. 8 units
• Rear view monitoring
--
4
4
• Control via NC pushbutton
Only light ON possible
here (delay time)
4
4
• Pulse mode (1 s ON, 9 s OFF)
4
4
4
• Artificial light suppression (glare shield 60 s)
4
4
4
• Maloperation suppression
4
4
4
• Range stabilization
4
4
• Presence simulation/vacation function after dusk; 4 hr permanently programmed -ON/OFF profile in 24-h rhythm
--
4
• Remote-controllable
--
--
4
• Generous wiring space
4
4
4
• Numerous cable entries
4
4
4
• Convenient mounting – the motion detector simply plugs into the mounting base 4
4
4
• Convenient setting of the detector over 2-pushbutton control
4
4
4
• Automatic startup settings on initial application of voltage
4
4
4
• Easy two-pushbutton operation:
4
4
4
Order Nos.
Technical specifications
Loads
Features
- Light ON (delay time), continuous ON (4 h),
- Light OFF (returns to normal mode)
- Storage of a user-definable brightness value
- Stores a user-definable delay time between 5 s and 30 min
- Switchover to brightness-independent mode and pulse mode
- Resetting of detector to 7 lux and 2 min delay time
- Test mode for testing the sensing range
Motion Detectors
5
© Siemens AG 2008
Selection and ordering data (Dated 03/2008)
Version
DT Order No.
Price
per PU
PU
PS1)/
P. unit
PG
Unit(s) Unit(s)
DELTA reflex motion detectors, IP55
Versions
• 120°
- Titanium white (similar to RAL 9010)
}
5TC7 210
1
1
024
- Anthracite
}
5TC7 211
1
1
024
- Titanium white (similar to RAL 9010)
}
5TC7 212
1
1
024
- Anthracite
}
5TC7 213
1
1
024
- Titanium white (similar to RAL 9010)
}
5TC7 214
1
1
024
- Anthracite
}
5TC7 215
1
1
024
• Titanium white (similar to RAL 9010)
}
5TC7 900
1
1
024
• Anthracite
}
5TC7 901
1
1
024
Spare remote controls, for "DELTA reflex motion detectors, IP55,
290° IR"
}
5TC7 902
1
1
024
• 290°
5TC7 210
• 290° IR (incl. 5TC7 902 IR remote control)
5TC7 210
Special bases for "DELTA reflex motion detectors, IP55"
• For outside or inside-angle mounting
• Cable entry surface or flush-mounting
• Dimensions (H x W x D): 64 mm x 88 mm x 105 mm
5TC7 900
Versions
• Infrared remote control
• Range: approx. 5 m
• Functions
- Vacation function / presence
- Continuous ON (4 h) / normal mode
- Test mode
5TC7 902
- Programming of brightness value and delay time
- Switchover to brightness-independent mode and pulse mode
- Programming of a 10 min delay time
- Resetting of detector to 7 lux and 2 min delay time
• Power supply through CR2025 lithium button cell,
included in delivery
• Dimensions (H x W x D): 87 mm x 40 mm x 6 mm
1)
You can order this quantity or a multiple thereof.
Siemens AG
Industry Sector
Building Technologies
Electrical Installation Technology
Postfach 10 09 53
93009 REGENSBURG
GERMANY
www.siemens.com/delta
Subject to change without notice
Order No.: E86060-K8240-E230-A1-7600
Dispo 18303
PI 0308 1. ROT 6 En / 803082
Printed in Germany
© Siemens AG 2008
The information provided in this brochure contains descriptions
or characteristics of performance which in case of actual use do
not always apply as described or which may change as a result
of further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed
in the terms of contract. Availability and technical specifications
are subject to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third
parties for their own purposes could violate the rights of
the owners.