* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download www.premier1supplies.com Installation Instructions
Survey
Document related concepts
Aluminium-conductor steel-reinforced cable wikipedia , lookup
Three-phase electric power wikipedia , lookup
Mains electricity wikipedia , lookup
Ground (electricity) wikipedia , lookup
Skin effect wikipedia , lookup
Ground loop (electricity) wikipedia , lookup
Alternating current wikipedia , lookup
Surge protector wikipedia , lookup
Electrical connector wikipedia , lookup
Telecommunications engineering wikipedia , lookup
Single-wire earth return wikipedia , lookup
National Electrical Code wikipedia , lookup
Transcript
800-282-6631 For a 3-wire fence, the spacing from the ground up would be 12, 26 and 40 in. For 7 strands, space 12, 20, 28, 35 and 48 in. with a hot wire offset on the grazed side(s). A. www.premier1supplies.com Up to 25 to 40 ft between line posts Washington, IA 284 INTELLICHECK SWITCH PUSH SWITCH UP if light goes out, either pulse voltage or pulse energy may be too low CHeck fence line for faults or excessive weed contact G. 44" - L. P. 36" + F. J. WARNING ELECTRIC FENCE PREMIER 2031 300th Street Washington IA 52353 800-282-6631 319-653-7622 O. M. 28"+/- E. 20"+/N M. 12"+/-/N J . & N. B. K. B. Insert Posts 42"–48" Installation Instructions C. 6-Light Tester D. Surge Protector Fencing diagram H. Galv. Steel T Post I. Combo Ins J. SupaTube A.Battery or Plug-in Energizers G.Cut-Out Switch H.Galv. Steel T Post, 6' B.Ground Rod, 6' x 5/8" #151000 I.Combo Ins., white Stainless Steel Clamp #151800 J. SupaTube for HT, 5" C.5-Light Tester #134100 SupaTube for HT, 10" D.Surge Protector #156500 E.Insulated Cable SupaTube for HT, 20" SupaTube for HT, 48" F.Warning Sign #346000 K. T Gripple #333000 #327600 #380321 #360500 #361000 #362000 #364800 L. TwistLink M. Round In-Line N. HT Wire Strainer Staples K.T Gripple L.TwistLink, 13" M.Round In-Line Strainer N.HT Wire Staples, 1.6" SupaTube Staples, 2" O.Speed Brace, (2 pack) P.GreenCote Wire, 2100' #336855 #336500 #330100 #360200 #360000 #336840 #301210 O. Speed Brace P. High-Tensile Wire HT Wire, 2000' HT Wire, 4000' #301200 #301300 Items not shown Gripple Tensioner Tool Round Strainer Handle #336830 #408200 1. Hand-set or power-drive end, corner, brace, line and dip posts. (T Posts can be used as an option to wood posts.) 2. Using a wire dispenser, unroll the HT smooth wire. Attach wires to the posts with staples at desired height from the ground and space from one another. 3. Insulate all wires that may be energized. 4. Tie wire ends off at end post assemblies with TwistLinks (see below #336500). 5. Strain all wires to 125 to 150 lbs. by installing InLine Strainers (see below #330100). 6. Connect the energized wires (using the insulated cable) to each other and to the energizer. 7. Connect all other wires to a ground rod. #111113 02/11