Download Selection Guide

Selection Guide
DeviceNet Digital Remote I/O [ARD-D Series]
Ordering information
AR
D
D
I
08
A
E
4S
Terminal
※2
block
No-mark
4S
Standard terminal block type
Sensor connector type(4pin)
No-mark
※4
E
Basic unit
Expansion unit
A
N
P
AC voltage
NPN open collector
PNP open collector
08
16
8 points type
16 points type
I
O
X
Input type
Output type
I/O mixed type
D
※5
A
Digital type
Analog type
D
※3
X
Basic unit(DeviceNet type)
Expansion unit(use in DeviceNet/Modbus)
AR
Autonics Remote I/O
Structure
I/O specification
※1
I/O point
I/O type
Digital/Analog
Network
Item
R
S
Relay
SSR
※1: Sensor connector type (ARD-4S) model is only for NPN, PNP I/O specifications.
※2: Sensor connector(CNE-P04- ) is sold separately. It is compatible with e-CON connector.
※3: It is only for an expansion unit of sensor connector type.
※4: It is only for an expansion unit of standard terminal block type.
※5: For ARD-A Series as analog type, refer to the 328 page.
Specifications
Type
Model
Basic
unit
Expansion
unit
Standard terminal block type
ARDARDARDDI08A
DI16N
DI16P
ARDARDARDDI08AE
DI16NE
DI16PE
ARDDO08R
ARDDO08RE
ARDDO08S
ARDDO08SE
ARDDO16N
ARDDO16NE
ARDDO16P
ARDDO16PE
ARDDX16N
ARDDX16NE
ARDDX16P
ARDDX16PE
PNP
output
16-point
NPN input
8-point
+ output
8-point
PNP input
8-point
+ output
8-point
Appearances
Power supply
Power consumption
Insulation type
Rated voltage: 24VDC, Voltage range: 12-28VDC
Max. 3W
Photocoupler isolated
I/O points
AC input
8-point
Control
I/O
324
NPN input
16-point
Voltage
75-250VAC 10-28VDC
Current
13mA/point 10mA/point
PNP input
16-point
Relay
output
8-point
NPN
SSR output
output
8-point
16-point
30-250VAC 10-28VDC(voltage drop: max. 0.5VDC)
Normally
open(N.O.)
0.5A/point (leakage cur- Input: 10mA,
250VAC
Output: 0.5A/point
1A/point
2A 1a
rent: max. 0.5 mA)
(leakage current: max. 0.5mA)
Selection Guide
Specifications
Type
Model
Basic
unit
Expansion
unit
Standard terminal block type
ARDARDARDARDARDARDARDARDDI08A
DI16N
DI16P
DO08R
DO08S
DO16N
DO16P
DX16N
ARDARDARDARDARDARDARDARDDI08AE
DI16NE
DI16PE
DO08RE
DO08SE
DO16NE
DO16PE
DX16NE
8-point, common
1-point, COM 8-point, common
Min. 200MΩ(at 500VDC megger)
±240 V the square wave noise (pulse width: 1㎲) by the noise simulator
1000 VAC 50/60 Hz for 1 min.
1.5 mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each of X, Y, Z directions for 2 hours
500 m/s2(approx. 50G) in X, Y, Z directions for 3 times
Photo
electric
sensor
ARDDX16P
ARDDX16PE
Fiber
optic
sensor
Common
Insulation resistance
Noise resistance
Dielectric strength
Vibration
Shock
Ambient tem-10 to 50℃, storage : -25 to 75 ℃
Environ- perature
ment
Ambient humidity 35 to 85%RH, storage : 35 to 85%RH
Protection
IP20(IEC standard)
Surge protection circuit, Reverse polarity protection circuit (common)
●Transistor output type - Overcurrent protection circuit (NPN type : operated at min. 1.9A → re-supply power in
Protection circuit
overcurrent status, PNP type : operated at min. 0.7A),
Overheating protection circuit(Min. 165℃), Short-circuit protection circuit
Indicator
Network status (NS) LED (green, red), Unit status (MS) LED (green, red), I/O status LED (input: green, output: red)
Material
Front case, Body Case: PC, Rubber cap: NBR
Mounting
DIN rail or screw lock type
Approval
Unit weight
Approx. 150g Approx. 140g
Approx. 160g Approx. 170g Approx. 140g
Door/Area
sensor
Proximity
sensor
Pressure
sensor
Rotary
encoder
Connector/
Socket
Temp.
controller
SSR/
Power
controller
※Environment resistance is rated at no freezing or condensation.
Type
Model
Sensor connector type
Basic unit
ARD-DI08N-4S
Expansion unit ARX-DI08N-4S
Counter
ARD-DI08P-4S
ARX-DI08P-4S
ARD-DO08N-4S
ARX-DO08N-4S
ARD-DO08P-4S
ARX-DO08P-4S
Timer
Panel
meter
Appearances
Tacho/
Speed/ Pulse
meter
Display
unit
Power supply
Power consumption
Insulation type
I/O points
Voltage
Control
I/O
Current
Common
Insulation resistance
Noise resistance
Dielectric strength
Vibration
Shock
Ambient temEnviron- perature
ment
Ambient humidity
Protection
Protection circuit
Indicator
Material
Mounting
Rated voltage: 24VDC, Voltage range: 12-28VDC)
Max. 3W
Photocoupler isolated
NPN input 8-point
PNP input 8-point
NPN output 8-point
PNP output 8-point
10-28VDC
10-28VDC(voltage drop: max. 0.5VDC)
10mA/point(Sensor current: 150 mA/point)
0.3A/point(leakage current: max.0.5mA)
8-point, common
Min. 200MΩ(at 500VDC megger)
±240V the square wave noise (pulse width: 1㎲) by the noise simulator
1,000VAC 50/60Hz for 1min. (between external terminals and case)
1.5mm amplitude at frequency of 10 to 55 Hz (for 1 min.) in each of X, Y, Z directions for 2 hours
500m/s2(approx. 50 G) in X, Y, Z directions for 3 times
Sensor
controller
Switching
mode power
supply
Stepper
motor&
Driver&Controller
Graphic/
Logic
panel
Field
network
device
-10 to 50℃, storage : -25 to 75℃
35 to 85%RH, storage : 35 to 85%RH
IP20(IEC standard)
Surge, Short-circuit, Overheating (over 165 ℃) and ESD protection, Reverse polarity protection circuit
Overcurrent protection circuit(operated at min. 0.17A)
Over current protection circuit(operated at min. 0.7A)
Network status (NS) LED (green, red), Unit status (MS) LED (green, red), I/O status LED (Input: green, Output: red)
Front case, Body Case: PC
DIN rail or screw lock type
Approval
Basic unit
Approx. 64 g
Approx. 64 g
Unit
weight
Expansion unit Approx. 56 g
Approx. 57 g
※Environment resistance is rated at no freezing or condensation.
Approx. 65 g
Approx. 58 g
Approx. 67 g
Approx. 59 g
325
Selection Guide
Connections
Standard terminal block type
● ARD-DI08A(E)
[AC input]
VAC VAC IN0 IN1 IN2 IN3 IN4 IN5 IN6 IN7
COM COM COM COM COM COM COM COM COM COM
● ARD-DI16N(E)
[DC NPN input]
COM IN0
VDC IN0 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8
VDC
IN1
IN3
IN5
IN7
VDC
● ARD-DI16P(E)
IN9 IN11 IN13 IN15
COM IN1
+ -
[Relay output]
VDC N·C OUT0 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7
IN3
[DC PNP input]
IN6 COM IN8 IN10 IN12 IN14
IN5
IN7 COM IN9 IN11 IN13 IN15
● ARD-DO08S(E)
COM COM COM COM COM COM COM COM COM COM
Load
Load
● ARD-DO16N(E)
[NPN output]
VDC OUT0 OUT2 OUT4 OUT6 VDC OUT8 OUT10 OUT12 OUT14
● ARD-DO16P(E)
[PNP output]
VDC OUT0 OUT2 OUT4 OUT6 VDC OUT8 OUT10 OUT12 OUT14
GND OUT1 OUT3 OUT5 OUT7 GND OUT9 OUT11 OUT13 OUT15
GND OUT1 OUT3 OUT5 OUT7 GND OUT9 OUT11 OUT13 OUT15
+ -
Load
Load
● ARD-DX16N(E)
● ARD-DX16P(E)
[DC NPN input/DC NPN output]
IN0 IN2 IN4 IN6 VDC OUT8 OUT10 OUT12 OUT14
[DC PNP input/DC PNP output]
+
IN0
COM
VDC IN1 IN3 IN5 IN7 GND OUT9 OUT11 OUT13 OUT15
+ -
[SSR output]
VAC VAC OUT0 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7
GND N·C COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7
+ -
VDC
IN4
- +
● ARD-DO08R(E)
+
IN2
IN2
COM IN1
IN4
IN3
IN6 VDC IN8 IN10 IN12 IN14
IN5
- +
IN7 GND OUT9 OUT11 OUT13 OUT15
+-
Load
Load
Sensor connector type
● AR -DI08N-4S
● AR -DI08P-4S
24VDC
4
3
NC
GND
IN0
IN1
-
+
1
4
3
NC
VDC
NC
GND
GND
NC
VDC
IN0
GND
NC
VDC
IN1
IN2
GND
NC
VDC
IN3
GND
NC
IN4
GND
IN5
GND
IN6
IN7
+
4
3
NC
VDC
NC
GND
NC
VDC
GND
NC
VDC
IN2
GND
NC
VDC
IN3
GND
NC
VDC
IN4
NC
VDC
IN5
GND
NC
VDC
GND
NC
VDC
Three-wire
NPN output
IN : 8P, 24VDC 10mA
326
-
● AR -DO08P-4S
24VDC
1
Sensor
2
● AR -DO08N-4S
24VDC
-
+
24VDC
-
+
2
1
4
3
2
1
GND
NC
VDC
NC
GND
NC
VDC
OUT0
NC
NC
VDC
OUT0
GND
NC
NC
OUT1
NC
NC
VDC
OUT1
GND
NC
NC
VDC
OUT2
NC
NC
VDC
OUT2
GND
NC
NC
NC
VDC
OUT3
NC
NC
VDC
OUT3
GND
NC
NC
GND
NC
VDC
OUT4
NC
NC
VDC
OUT4
GND
NC
NC
GND
NC
VDC
OUT5
NC
NC
VDC
OUT5
GND
NC
NC
IN6
GND
NC
VDC
OUT6
NC
NC
VDC
OUT5
GND
NC
NC
IN7
GND
NC
VDC
OUT7
NC
NC
VDC
OUT7
GND
NC
NC
Sensor
2
Three-wire
PNP output
IN : 8P, 24VDC 10mA
Load
OUT : 8P, 24VDC 0.3A/Point
Load
OUT : 8P, 24VDC 0.3A/Point
Selection Guide
Dimensions
(unit:mm)
Standard terminal block type
105
50
Fiber
optic
sensor
● Panel cut-out
50
3-Ø4.5
Photo
electric
sensor
3-M4 TAP
Door/Area
sensor
60.5
Pressure
sensor
Rotary
encoder
※Tightening torque: 1.8 to 2.5N·m
※Same dimensions are applied to both
basic and expansion unit.
※Connecting connectors are included for
expansion units.
38.5
52
60.5
Proximity
sensor
35.3
Connector/
Socket
Temp.
controller
SSR/
Power
controller
Sensor connector type
● Mounting on DIN rail
31
26
● Mounting with screws
2-Ø4.5
Counter
12
Timer
Tacho/
Speed/ Pulse
meter
94
86
82
76
Panel
meter
Display
unit
Sensor
controller
※Tightening torque: 1.8 to 2.5N·m
4.9
Switching
mode power
supply
59
Stepper
motor&
Driver&Controller
Graphic/
Logic
panel
35.3
※Same dimensions are applied to
both basic and expansion unit.
327
Field
network
device
Selection Guide
DeviceNet Analog Remote I/O [ARD-A Series]
Ordering information
AR D
A
I
04
I/O points
I/O type
Digital/Analog
Network
Item
04
4-point type
I
O
Input type
Output type
A
※1
D
Analog type
Digital type
D
DeviceNet type
AR
Autonics Remote I/O
※1. For digital type ARD-D Series, refer to the 324 page.
Specifications
Model
ARD-AI04
ARD-AO04
Rated voltage: 24 VDC, Voltage range: 12-28 VDC
Max. 3 W
Photocoupler isolated
Input 4-point (switchable voltage/current)
0-10 VDC, -10-10 VDC, 0-5 VDC, 1-5 VDC, -5-5 VDC
(input impedance: max. 1 MΩ)
DC4-20 mA, DC0-20mA (input impedance: 250Ω)
±5% F.S of rated I/O range
1 ms/point
±0.3% F.S
Output 4-point (voltage 2CH, current 2CH)
0-10 VDC, -10-10 VDC, 0-5 VDC, 1-5 VDC, -5-5 VDC
(load resistance: max. 1 KΩ)
DC4-20 mA, DC0-20 mA (load resistance: max. 600 Ω)
Appearances
Power supply
Power consumption
Insulation type
I/O points
Control
I/O
Voltage
Current
Max. allowable I/O
Sampling cycle
25±5 ℃
Accu-10 ±20 ℃
racy
30 to 50 ℃
Resolution
Insulation resistance
Noise resistance
Dielectric strength
Vibration
Shock
Ambient
Environ- temperature
ment
Ambient humidity
Protection
Protection circuit
Indicator
Material
Mounting
Approval
※
Weight 1
±0.6% F.S.
1/16,000
Min. 200 MΩ(at 500 VDC megger)
±240 V the square wave noise (pulse width: 1 ㎲) by the noise simulator
500 VAC 50/60Hz for 1 min. (between external terminals and case, between i/o and power terminals)
1.5 mm amplitude at frequency of 10 to 55 Hz (for 1 min.) in each of X, Y, Z directions for 2 hours
500m/s2 (approx. 50 G) in each of X, Y, Z directions for 3 times
-10 to 50 ℃, storage: -25 to 75 ℃
35 to 85%RH, storage: 35 to 85%RH
IP20(IEC standard)
Surge, ESD protection, Reverse polarity protection circuit
Network status(NS) LED(green, red), Unit status(MS) LED(green, red)
Front case, Body Case: PC
DIN rail or screw lock type
Approx. 210 g (approx. 145 g)
※1. The weight is with packaging and the weight in parentheses is only unit weight.
※Environment resistance is rated at no freezing or condensation.
328
Selection Guide
Dimensions
(unit : mm)
●Panel cut-out
105
50
50
3-M4 TAP
Fiber
optic
sensor
Door/Area
sensor
60.5
60.5
52
3-ø4.5
Photo
electric
sensor
Proximity
sensor
38.5
Pressure
sensor
Rotary
encoder
35.3
Connector/
Socket
Connections
※1
Short
V0-
V1+
I0+
AG
V
I1+
V1-
AG
I2+
V2+
V2-
I3+
V3+
AG
V3-
AG
N.C
N.C
N.C
V1+
V0+
I1+
COM COM COM COM N.C
V
mA
I0+
N.C
N.C
N.C
N.C
N.C
N.C
N.C
N.C
N.C
N.C
N.C
mA
1 to 5 VDC
SSR/
Power
controller
-5-5 VDC
0-10 VDC
-10-10 VDC
Current
V0+
N.C
Temp.
controller
0-5 VDC
lARD-AO04
Voltage
lARD-AI04
Counter
DC 0-20 mA
DC 4-20 mA
※1: For current input, short between V□+ and I□+.
Timer
Panel
meter
Modbus sensor connector type digital remote I/O [ARM Series]
Tacho/
Speed/ Pulse
meter
Ordering information
AR
M
D
I
08
N
Display
unit
4S
Sensor
controller
Switching
mode power
supply
Terminal block
I/O specifications
I/O points
I/O type
Digital/Analog
Network
Item
4S
Sensor connector 4-pin socket
N
NPN open collector
P
PNP open collector
08
8 points type
I
Input type
O
Output type
D
Digital type
M
Basic unit(Modbus RTU type)
X
Expansion unit(Use in DeviceNet/Modbus)
AR
Autonics Remote I/O
Stepper
motor&
Driver&Controller
Graphic/
Logic
panel
Field
network
device
329
Selection Guide
Specifications
Model
Basic unit
Expansion unit
ARM-DI08N-4S
ARX-DI08N-4S
ARM-DI08P-4S
ARX-DI08P-4S
ARM-DO08N-4S
ARX-DO08N-4S
ARM-DO08P-4S
ARX-DO08P-4S
Appearances
Power supply
Power consumption
I/O points
Control Voltage
I/O
Current
Common
Communication speed
Communication method
Communication distance
Multi-drop
Medium access
Application standard
Protocol
Data bit
Stop bit
Parity bit
Rated voltage: 24VDC, Voltage range: 12-28VDC
Max. 3W
NPN input 8 points
PNP input 8 points
NPN output 8 points
PNP output 8 points
10-28VDC
10-28VDC Output(voltage drop: Max. 0.5V)
10mA/point (sensor current: 150mA/points)
0.3A/point (leakage current: Max. 0.5mA)
8 points, common
2400, 4800, 9600, 19200, 38400, 57600, 115200bps(default 9600bps)
2-wire half duplex
Max. 800m
Max. 32 Multi-Drop
POLL
Compliance with EIA RS485
Modbus RTU
8 bits
1 or 2 bits(default: 2)
None/Odd/Even(default: None)
Isolation type
I/O and inner circuit: Photocoupler insulation
Modbus to internal bus and inner circuit: Insulation
Unit power: Non-insulation
Insulation resistance
Noise resistance
Dielectric strength
Vibration
Shock
Environ Ambient temperature
-ment Ambient humidity
Protection
Protection circuit
Indicator
Material
Mounting
Min. 200MΩ (at 500VDC megger)
±240V the square wave noise (pulse width: 1㎲) by the noise simulator
1,000VAC 50/60Hz for 1 minute
1.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
500m/s²(approx. 50G) in each of X, Y, Z directions for3 times
-10 to 55℃, storage: -25 to 75℃
35 to 85%RH, storage: 35 to 85%RH
IP20(IEC standards)
Surge, Short-circuit, Overheating and static protection, Reversed polarity protection circuit
Over current protection(Operated at min. 0.17A)
Over current protection(Operated at min. 0.7A)
Network status(NS) LED (Green, Red), Module status(MS) LED (Green, Red)
I/O status LED (Input: Green, Output: Red)
Front case: PC, Body case: PC
DIN Rail or Screw lock type
Approval
Basic unit
Unit
weight Expansion unit
Approx. 65g
Approx. 55g
Approx. 65g
Approx. 55g
※ Environment resistance is rated at no freezing or condensation.
330
Approx. 65g
Approx. 55g
Approx. 66g
Approx. 56g
Selection Guide
Connections
●ARM-DI08N-4S
●ARX-DI08N-4S
●ARM-DI08P-4S
●ARX-DI08P-4S
24VDC
4
3
NC
GND
IN0
IN1
-
+
2
●ARM-DO08N-4S
●ARX-DO08N-4S
24VDC
1
4
3
NC
VDC
NC
GND
GND
NC
VDC
IN0
GND
NC
VDC
IN1
IN2
GND
NC
VDC
IN3
GND
NC
VDC
IN4
GND
NC
IN5
GND
NC
IN6
GND
IN7
GND
-
+
1
4
3
NC
VDC
NC
GND
GND
NC
VDC
OUT0
GND
NC
VDC
OUT1
IN2
GND
NC
VDC
IN3
GND
NC
VDC
VDC
IN4
GND
NC
VDC
IN5
GND
NC
NC
VDC
IN6
GND
NC
VDC
IN7
GND
Three-wire
NPN output
Sensor
Sensor
2
24VDC
+
-
+
3
NC
VDC
NC
GND
NC
VDC
NC
NC
VDC
OUT0
GND
NC
NC
NC
NC
VDC
OUT1
GND
NC
NC
OUT2
NC
NC
VDC
OUT2
GND
NC
NC
OUT3
NC
NC
VDC
OUT3
GND
NC
NC
VDC
OUT4
NC
NC
VDC
OUT4
GND
NC
NC
VDC
OUT5
NC
NC
VDC
OUT5
GND
NC
NC
NC
VDC
OUT6
NC
NC
VDC
OUT6
GND
NC
NC
NC
VDC
OUT7
NC
NC
VDC
OUT7
GND
NC
NC
Load
OUT : 8P, 24VDC 0.3A/Point
Fiber
optic
sensor
24VDC
4
Three-wire
NPN output
2
●ARM-DO08P-4S
●ARX-DO08P-4S
1
IN : 8P, 24VDC 10mA
IN : 8P, 24VDC 10mA
-
Photo
electric
sensor
2
1
Door/Area
sensor
Proximity
sensor
Pressure
sensor
Rotary
encoder
Connector/
Socket
Load
Temp.
controller
OUT : 8P, 24VDC 0.3A/Point
SSR/
Power
controller
Dimensions
● Mounting DIN rail
● Mounting with screws
12
31
26
(unit:mm)
Counter
2-ø4.5
Timer
Panel
meter
94
86
76
82
Tacho/
Speed/ Pulse
meter
Display
unit
Sensor
controller
4.9
Switching
mode power
supply
Stepper
motor&
Driver&Controller
59
Graphic/
Logic
panel
35.3
※ Same dimensions are applied to
both basic and expansion unit.
331
Field
network
device
Selection Guide
Communication Converter
● SCM-WF48: Wi-Fi/RS485, USB wireless communication converter
● SCM-US48I: USB to Serial converter
● SCM-38I: RS232C to RS485 converter
● SCM-US: USB to Serial converter
Specifications(SCM-WF48)
SCM-WF48
Model
(available soon)
(pending)
Appearances
Power supply
Allowable voltage range
Communication type
Isolation resistance
Protection circuit
Dielectric strength
Noise resistance
Vibration
Shock
Ambient
Environ temperature
-ment
Ambient humidity
Protection
Mounting
Accessories
※1
Weight
24VDC
12-28VDC
RS485, USB, Wi-Fi
Min. 200 MΩ(at 500 VDC megger between external terminal and case)
Reverse polarity protection circuit, surge protection circuit
1,000VAC 50/60Hz for 1 min.(between external terminal and case)
±500 V the square wave noise(pulse width: 1㎲) by the noise simulator
1.5 mm amplitude at frequency of 10 to 55 Hz(for 1min.) in each of X, Y, Z directions for 2 hours
500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times
-10 to 55℃, storage: -20 to 60℃
35 to 80%RH, storage: 35 to 80%RH
IP20(IEC standards)
DIN rail or panel mounting
USB 2.0 Mini 5P type cable (length: 1 m),
Connector for RS-485 (4-pin, male type) 1EA
Approx. 160g(approx. 57g)
※1: The weight is with packaging and the weight in parentheses is only unit weight.
※Environment resistance is rated at no freezing or condensation.
RS485 communication specifications
Connection
Standard
Protocol
Com. method
Synchronous method
Effective com.
distance
Com. speed※1
Data bit※1
Stop bit※1
Parity bit※1
Multi-drop
Connection type
RS485
EIA RS485
Modbus RTU
2-wire half duplex
Asynchronous
Max. 800m
4800, 9600, 19200, 38400, 57600,
115200bps
(factory default: 115200bps)
5bit,6bit,7bit,8bit(factory default:8bit)
1bit, 2bit(factory default: 1bit)
None, Even, Odd(factory default: None)
Max. 31 Multi-drop
4-wire screw terminal
(2-wire communication method)
※1: You can set this by DAQMaster.
332
Wi-Fi communication specifications
Protocol
Standard
Com. speed
Frequency range
Security
Antenna
Com. distance
TCP/IP(IPv4)
802.11 b/g/n(IEEE 802.11b) compatible
Max. 11 Mbps
2.4 to 2.497 GHz
WEP, WPA, WPA2-PSK, Enterprise
2dBi external antenna
Max. 100 m
USB communication specifications
Power
Standard
Com. method
Connections
5 V, 500 mA
USB 2.0(compatible sub-transmission)
2-wire half duplex
USB 2.0 Mini 5P type(Male)
Selection Guide
Specifications(SCM-US48I, SCM-38I, SCM-US)
SCM-US48I
Model
SCM-38I
Photo
electric
sensor
SCM-US
Fiber
optic
sensor
Door/Area
sensor
Appearances
Proximity
sensor
Power supply
Power consumption
※
Max. com speed 2
Communication type
5VDC USB bus Power
12-24VDC ± 10%
Max. 1W
Max. 1.7W
1,200 to 115,200bps(Recommended : 9,600bps)
Half duplex type
Available com. distance
USB: Max. 1m ± 30%
RS485: Max.1.2km
Multi-drop
Protocol
※2
Data bit
Stop bit
Parity bit
Connection type
Max. 1.2km
Max. 31 multi-drop
5 to 8 data bits
1 or 2 stop bits
None/Odd/Even
USB: B type connector
RS232: D-sub 9Pin
RS485: 4-wire screw terminal(2wire communication type)
5VDC USB bus Power
Max. 1W
Dielectric strength
●Between terminals and case:
200VAC 50/60Hz for 1 min.
●Between USB and RS485:
2500VAC 50/60Hz for 1 min.
Insulation resistance
Min. 100MΩ(at 500VDC megger)
-
Noise strength
±500V the square wave noise(pulse width: 1㎲) by the noise simulator
-
Shock
Environ
-ment
Rotary
encoder
USB: A type connector
Earphone jack(4 pole stereo phone
plug)
Non-isolation
Isolation
Vibration
Pressure
sensor
1.5m(not extension)
Isolation type
●Between terminals and case:
200VAC 50/60Hz for 1 min.
●Between RS232C and RS485:
2500VAC 50/60Hz for 1 min.
※1
0.75mm amplitude at frequency of 10 to 55Hz in each of X, Y, Z directions for 1 hour
0.5mm amplitude at frequency of 10 to 55Hz in each of X, Y, Z directions for 10 minutes
Mechanical
300m/s2 (approx. 30G) in each of X, Y, Z directions for 3 times
Malfunction
Ambient
temperature
Ambient
humidity
100m/s2 (approx. 10G) in each of X, Y, Z directions for 3 times
Panel
meter
Tacho/
Speed/ Pulse
meter
-10 to 55℃, storage: -20 to 60℃
Display
unit
35 to 85%RH, storage: 35 to 85%RH
Approval
Unit weight
Sensor
controller
Approx. 46g
Switching
mode power
supply
Approx. 41g
※There might be some differences in the specification above depending on PC environment.
※Environment resistance is rated at no freezing or condensation.
Stepper
motor&
Driver&Controller
Dimensions
(unit: mm)
SCM-WF48
76
98
41.3
25.3
45
2-Ø3.5
Graphic/
Logic
panel
Field
network
device
39
28
SSR/
Power
controller
Timer
Malfunction
USB 2.0 AB type connector
(length: 1m)
Approx. 34.5g
Temp.
controller
Counter
-
Mechanical
Accessory
Connector/
Socket
333
Selection Guide
SCM-US48I
※USB 2.0 AB type cable is including the product and is also sold separately.
(model: USB AB CABLE)
39
25.6
3-Ø4
38
23.5
75.5
< USB 2.0 AB type cable >
1,000±30
USB B Type
USB A Type
20±5
20±5
SCM-US38I
25.6
39
3-Ø4
38
75.5
9 8
23.5
81.7
SCM-US
52
A C.C
O.P.R
12
18
40.3
Ø2.5×4P-1.5m
1 2
VCC
GND
8
12
18
334
T×D
R×D
4.5
8
※LED indicator
1 . O.P.R: Power
2 . A.C.C: Rx/Tx data transmission