Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Technologies GmbH & Co KG Catalogue Magnetoresistive Sensors Copyright© 2012, ChenYang Technologies GmbH & Co. KG All rights reserved. No part of this catalogue may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright holder. Contact Address: Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de Technologies GmbH & Co KG Contents Differential Magnetoresistive Sensor CY-DMR-01, CY-DMR-01H, CY-DMR-02 and CYDMR-02H ............................................................................................................................. 1 Differential Magnetoresistive Sensor CY-DMR-03 ............................................................... 5 Dual Differential Magnetoresistive Sensor CY-SMR-04 ....................................................... 8 Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de Technologies GmbH & Co KG Differential Magnetoresistive Sensor CY-DMR-01, CYDMR-01H, CY-DMR-02 and CY-DMR-02H Features Typical applications Sensing over wide rotation speed range Robust metallic or plastic housing Signal amplitude is speed independent Biasing magnet built in Best suited for harsh environments Speed detection Position detection Rotation detection Angle encoder Linear position sensing The differential magnetoresistive sensors CY-DMR-01, CY-DMR-01H, CY-DMR-02 and CY-DMR-02H consist of two series coupled magneto resistors (D-type InSb/NiSb semiconductor resistors whose value can be magnetically controlled), which are mounted onto an insulated ferrite substrate. The sensors are encapsulated in a metallic or plastic package and each of them has 3 connection terminals. The basic resistance of the total system is from 2x120Ω to 2x300Ω. A permanent magnet, which supplies a biasing magnetic field, is fixed on the base of the sensor. Outlines Case Style A: Ø8.5x6.5mm Ø0.5 2 6.5 Diameter of leads is 0.71mm Ø 8.5 3 1 Dimensions in mm R1-2 75 Sensing direction R2-3 5 3: V+ power supply (+5V) 1 black 2 white 3 red 2: Output signal 1: GND Ø7.5 Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de -1- Technologies GmbH & Co KG Case Style B: Ø10x10mm Sensing direction Ø0.5 3 2 1 Ø7.4 10 3 1 3.4 10 2 1.0 R1-2 R2-3 Ø10 3: V+ power supply (+5V) 2: Output signal 0.5 1: GND Part number Part number CY-DMR-01-A CY-DMR-01-B CY-DMR-01H-A CY-DMR-01H-B CY-DMR-02-A CY-DMR-02-B CY-DMR-02H-A CY-DMR-02H-B Case style A B A B A B A B Markt Schwabener Str. 8 D-85464 Finsing Germany Outline Ø8.5x6.5mm Ø10x10mm Ø8.5x6.5mm Ø10x10mm Ø8.5x6.5mm Ø10x10mm Ø8.5x6.5mm Ø10x10mm Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de Cross reference Infineon FP212D250-22 Infineon FP210D250-22 Infineon FP212D250-22 Infineon FP210D250-22 Infineon FP212L100-22 Infineon FP210L100-22 Infineon FP212L100-22 Infineon FP210L100-22 -2- Technologies GmbH & Co KG Specifications Maximum power supply Vmax Nominal power supply Total resistance R 1-3 (δ=∞, I≤mA, t=25°C) 10V DC 5V DC 900 Ω – 1600 Ω 900 Ω – 1600 Ω 220 Ω – 660 Ω 220 Ω – 660 Ω ≤10% ≤ 130mV ≥900mV ≥900mV ≥1000mV ≥1000mV >20kHz -30°C ~ +70°C -30°C ~ +100°C -30°C ~ +70°C -30°C ~ +100°C -40°C ~ +85°C -40°C ~ +100°C -40°C ~ +85°C -40°C ~ +100°C CY-DMR-01 CY-DMR-01H CY-DMR-02 CY-DMR-02H Center symmetry M=100% (R1-2-R2-3)/R1-2 (δ=∞) Offset voltage (at Vin and δ=∞) Open circuit output voltage Vout pp (at Vin CY-DMR-01 and δ=0.15mm) CY-DMR-01H CY-DMR-02 CY-DMR-02H Cut-off frequency Operating temperature CY-DMR-01 CY-DMR-01H CY-DMR-02 CY-DMR-02H Storage temperature CY-DMR-01 CY-DMR-01H CY-DMR-02 CY-DMR-02H Standard target object: 1.8x5x4mm (1.8x5mm face moves in the sensing direction of the sensor). Measurement Arrangement Standard target object A measuring bridge is used for applications of the magnetoresistive sensors CY-DMR-01, CY-DMR-01H, CY-DMR-02 and CY-DMR02H. The resistance of one sensor is changed by approaching a small soft iron part (standard target object) close to it. As result an output voltage change of measuring bridge is caused by the resistance change (see below). Markt Schwabener Str. 8 D-85464 Finsing Germany S δ 0.15mm Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de 1 2 3 -3- Technologies GmbH & Co KG VOUT ~ S S To convert small distance into a proportional electric signal, one can use a small soft iron part with definite width (e.g. b=1.8mm) to move over the face of the sensor. A linear signal up to 1.5mm can be obtained in this way. The sinusoidal signal gives a voltage output proportional to the distance in the zero crossover region. Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de -4- Technologies GmbH & Co KG Differential Magnetoresistive Sensor CY-DMR-03 Features Typical applications Sensing over wide rotation speed range (0~100kHz) Robust metallic or plastic housing Signal amplitude is speed independent Biasing magnet built in Best suited for harsh environments Rotation speed detection Rotation position detection Proximity Switch Angle encoder Linear position sensing The differential magnetoresistive sensor CY-DMR-03 consists of two series coupled magneto resistors (D-type InSb/NiSb semiconductor resistors whose value can be magnetically controlled), which are mounted onto an insulated ferrite substrate. The sensor is encapsulated in a metallic package and has 3 connection terminals. The basic resistance of the total system is 2 x 250Ω. A permanent magnet, which supplies a biasing magnetic field, is fixed on the base of the sensor. Sensor Outline Ø10 Ø10 180 Sensing direction 10 3 red 2 black 1 white Ø12.6 20 Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de -5- Technologies GmbH & Co KG Sensor Circuits a) Without Amplifier 2 B B 1 R1-2 3 3: V+ power supply (+5V), 2: Vout Output signal, 1: GND R2-3 b) Built-In Inner Amplifier 3 R2-3 B 20k 10k 10k - 2 LM258 3: V+ (+5V), 2: Vout Output signal, 1: GND + R1-2 6.8k B 10k 10k 1 Specifications Part numbers Built-in Inner amplifier Maximum power supply Vmax Nominal power supply Inner total resistance R 1-3 (δ=∞, I≤mA, t=25°C) Center symmetry M=100% (R1-2-R2-3)/R1-2 (δ=∞) Offset voltage (at Vin and δ=∞) Open circuit output voltage Vout pp (at Vin and δ=0.15mm) Frequency range Operating temperature Storage temperature CY-DMR-03A no 10V DC 5V DC 700 Ω – 1500 Ω ≤10% ≤ 130mV ≥1100mV CY-DMR-03B yes 5.5V DC 5V DC 700 Ω – 1500 Ω ≤10% ≤ 130mV 3500mV 0-100kHz -20°C ~ +80°C -40°C ~ +85°C 0-100kHz -20°C ~ +80°C -40°C ~ +85°C Standard target object: 1.8x5x4mm (1.8x5mm face moves in the sensing direction of the sensor). Cross Reference Part number CY-DMR-03A CY-DMR-03B Markt Schwabener Str. 8 D-85464 Finsing Germany Cross reference MuRata FR05CM21AR --- Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de -6- Technologies GmbH & Co KG Measurement Arrangement Standard target object A measuring bridge is used for applications of the magnetoresistive sensor CY-DMR-03. The resistance of the sensor is changed by approaching a small soft iron part (standard target object) close to it. As result an output voltage change of measuring bridge is caused by the resistance change (see below). S δ 0.15mm Sensor CY-DMR-03A VOUT ~ S R R Sensor CY-DMR-03B 10k VOUT ~ S VOUT VO G 3 10k To convert small distance into a proportional electric signal, one can use a small soft iron part with definite width (e.g. b=1.8mm) to move over the face of the sensor. A linear signal up to 1.5mm can be obtained in this way. The sinusoidal signal gives a voltage output proportional to the distance in the zero crossover region. Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de -7- Technologies GmbH & Co KG Dual Differential Magnetoresistive Sensor CY-SMR-04 Features Typical applications The gear rotation direction can be detected by monitoring the phase shift direction of the two output signals A and B Wide sensing range, detecting frequency range 0 ~ 100kHz Good Signal-to-Noise ratio, high resolution, high sensitivity Contactless measurement, easy to use Detection of gear rotation speed and direction in factory automation equipments Detection of the direction of linear motion servo Motor controller for wehicles Measurement of needle position in industrial knitting machines The differential magnetoresistive sensor CY-SMR-04 consists of two groups of two series coupled magneto resistors (D-type InSb/NiSb semiconductor resistors whose value can be magnetically controlled). The magneto resistors are mounted onto an insulated ferrite substrate. The sensor is encapsulated in a metallic and plastic package and has 2 output signals. The phase shift between the two output signals is 90°. A permanent magnet, which supplies a biasing magnetic field, is fixed on the base of the sensor. Outlines MR1 3x3.14 2 Ø0.6 MR2 7.0 MR3 Sensing direction MR4 1.0 12.5 10 3 1 4 2 Ø10.3 Ø12.9 0.5 Markt Schwabener Str. 8 D-85464 Finsing Germany Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de -8- Technologies GmbH & Co KG Inner Circuit 1: Vcc MR2 MR1 2: Va 3: Vb MR3 MR4 4: GND Output Signal Wave Vout Va Vb 0.5 Vcc t 0 Specifications Maximum power supply Vmax Nominal power supply Total resistance R 14 (δ=∞, I≤mA, t=25°C) R14 = (MR1+MR3)x(MR2+MR4)/(MR1+MR2+MR3+MR4) Center symmetry M=100% (R1-2-R2-3)/R1-2 (δ=∞) Open circuit output voltage Vout pp (at Vin and gap δ=0.15mm) Frequency range Target Gear Modulus Phase difference between two output signals Va and Vb Operating temperature Storage temperature 10V DC 5V DC 0.5kΩ –3kΩ ≤10% ≥450mV 0-100kHz 0.4mm 90° ± 10° -20°C ~ +80°C -40°C ~ +85°C Part number Part number CY-SMR-04 Case style Cylinder Markt Schwabener Str. 8 D-85464 Finsing Germany Outline Ø12.9 x 12.5mm Tel: +49 (0)8121-2574100 Fax: +49 (0)8121-2574101 Email: [email protected] http://www.chenyang.de Cross reference MuRata FR05CM12AL -9-