Download M-Pulse series

Energy for magnets
Impulse Magnetizers
M-Pulse series
Energy
· Magnetization of NdFeB, SmCo, Ferrite, AlNico
· Capacitor discharge principle
· strong and low inductive setup
Convenience
· Easy usage by Touch Screen Monitor
· Clear and descriptive functions
· Diagnose functions
Flexibility
· Modular design; scalable up to any extend
· 100J to 200000J
· Extendable PLC control, scalable up to any extend
we make your products attractive
Technical Data:
· Selectable voltage standards:
5000V, 3000V, 2000V, 1400V, 1000V, 700V, 450V
· Selectable current capability
<50kA, <25kA, 10kA
· Current rise:
<2000A/µm, <1000A/µs, <500A/µs
· Current shape:
Sine halfwave used for magnetization
of non conductive assemblies
Exponential damped used for
magnetization of conductive assemblies
Ringing
Used for demagnetisation
· # of high current outputs selectable:
1 – 10 pcs.
· High current output impedance:
1mΩ .. 2mΩ
500nH .. 2µH dependant on energy
· Selectable charging power:
200W, 300W, 600W, 1800W, 3600W
· Cycle time
= energy / charging power
Control
· PLC
Siemens S7-1200 or others
· HMI
Touchpanel
· Interfaces:
PLC, other interfaces available
Safety features:
Triple redundant voltage control
Evaluation of magnetizing current
Evaluation of coil resistance
Over temperature detection of coil and magnetizer
Internal safety discharge in case of: Power off, Open door, Emergency stop
M-Pulse GmbH & Co. KG I Haunerbusch 110
58566 Kierspe I Germany
Tel.: +49 2359 508099-0 I Fax: +49 2359 508099-20
www.m-pulse.eu
M-Pulse (Asia) Pte Ltd I Block 5012, Ang Mo Kio Ave 5
05-01/02 Techplace I 569876 Singapore
Tel.: +65 67 49 49 91 I Fax: +65 68 48 49 66
www.m-pulse-asia.com