Download Membrane Deaerator Inquiry Form

4265 SAN FELIPE, SUITE 620
HOUSTON, TEXAS 77027
(+1) 713.400.4777
[email protected]
Name:
Date:
Company:
Phone:
Address:
Email:
Project Name:
Project Location:
Membrane Deaerator Inquiry Form
Design Parameter
Client Response
Operating Conditions
Units
Inlet Water Flow Rate
Inlet Pressure
Turndown Requirement
Pretreatment Description
Inlet Water Quality
Select
Select
%
Inlet Water Temperature (normal, max, min)
Inlet Dissolved Oxygen (normal, max, min)
Inlet Total Suspended Solids (TSS)
Inlet Suspended Oil
Inlet Total Dissolved Solids (TDS)
Inlet pH
Select
Select
mg/L
mg/L
mg/L
norm:
norm:
max:
max:
min:
min:
Inlet Silt Density Index (SDI)
Outlet Water Quality
Outlet Dissolved Oxygen Requirement
Maximum Allowable Pressure Drop
Select
Select
Design Specifications
Footprint and/or Weight Constraints
Installation Location
Hazardous Area Classification
☐ Onshore ☐ Offshore
Comments:
☐Yes ☐No
Utilities/Auxiliaries
Is nitrogen supply available onsite? If so, at what purity?
Is dry air available onsite? If so, at what pressure?
Is utility water available? If so, seawater or freshwater?
Are there Clean-In-Place (CIP) facilities on site? If so, what are tank
and pump capacity?
Are acid dosing facilities available on site?
Are caustic dosing facilities available on site?
Power Available
Additional Comments:
Rev. 10/9/14
☐Yes ☐No
☐Yes ☐No
☐Yes ☐No
☐Yes ☐No
☐Yes ☐No
☐Yes ☐No
Voltage:
Purity (%):
Pressure (Select):
☐ Seawater ☐ Freshwater
Tank (Select):
Pump (Select):
Comments:
Comments:
Phase:
Frequency: