Download QUOTATION LCR Meter

EMIN Vietnam Joint Stock Company
Office in Ha Noi City:
Add : No 8A, Hoang Cau Street, Dong Da Distric, Ha Noi, Vietnam
Tel : (04) 35.381.269 - ( 04) 35.381.271
Fax : (04) 35 190 360;
Email: [email protected]
Office in Ho Chi Minh City:
Add : No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City
Tel : (08) 3811 96 36 - (08) 3811 93 59
Fax : (08) 3811 95 45 ; Email: [email protected]
QUOTATION
LCR Meter
14/05/2017
To:
Company:
Address:
Email:
Tel:
Fax
Thank you very much for your requirement and we would like to offer you the price as under:
Commodity
Sanwa LCR700 LCR (
20kH,2000mF,200MΩ,0.3%)
Description
Manuafacturer:Sanwa
Model : LCR700
Origin: Taiwan
Waranty : 12 month
Price
219
USD
Ls/Lp : 20 μH, 200 μH, 2000 μH, 20 mH, 200 mH, 2000 mH, 20 H,
200 H, 2000 H,20000H
Cs/Cp : 20 pF, 200 pF 2000 pF, 0.1 pF, 20 nF, 200 nF,
2000 nF, 20 μF, 200 μF, 2000 μF, 20 Mf
Rs/Rp : 2 Ω, 20 Ω, 200 Ω, 2000 Ω, 20 kΩ, 200 kΩ, 2000 kΩ,
2000 kΩ, 20 MΩ, 2000 MΩ
Resitance : 2 Ω, 20 Ω, 200 Ω, 2000 Ω, 20 kΩ, 200 kΩ, 2000 kΩ,
2000 kΩ, 20 MΩ, 200 MΩ
Dimensions: 184x87x45mm
Weight: 400 g
Accessories: Test Lead
TTI LCR400 low-cost
precision LCR bridge
(10kHz)
Model: LCR400
Manufacturer: TTI
Warranty: 12 months
MEASUREMENT FUNCTIONS
Parameters Measured: R, L, C, D, & Q.
Parameter Selection: Manual or automatic selection of R, L or
C.
Measurement Modes: Series or parallel equivalent circuit.
Range Hold: Prevents autoranging when changing
components.
Zero Function: Nulls out up to 100pF at test fixture.
0 USD
Measurement Freq.: Selectable as 100Hz/120Hz, 1kHz,
10kHz.
Displayed Functions: R+Q, L+Q, C+D, C+R.
MEASURING RANGES
Resistance: 0.1m to 990M
Inductance: 0.001µH to 9900H
Capacitance: 0.001pF to 99000µF
D: 0.001 to 999
Q: 0.001 to 999
Accuracy Limits: 100Hz 1kHz 10kHz
R 0.1% ± 1 digit 2-1M 2-500k 2-50k
0.5% ± 1 digit 0.4-5M 0.4-2M 0.4-200k
2% 1 digit 0.1-20M 0.1-10M 0.1-500k
L 0.1% ± 1 digit 4mH-500H 0.4mH-50H 40µH-5H
0.5% ± 1 digit 0.8mH-2500H 80µH-250H 8µH-25H
2% ± 1 digit 0.2mH-9900H 20µH-1000H 2µH-100H
C 0.1% ± 1 digit 10nF-1000µF 1nF-100µF 100pF-10µF
0.5% ± 1 digit 2nF-5000µF 200pF-500µF 20pF-50µF
2% ± 1 digit 500pF-20000µF 50pF-2000µF 5pF-200µF
(R accuracies apply for Q<0.1. L accuracies apply for Q>10.
C accuracies apply for D<0.1 and after Null).
LIMITS COMPARATOR
GENERAL
Keyboard: Full numeric keyboard.
Non-volatile memory: Up to 9 complete set-ups.
Input Voltage: 230V or 115V ±14%, 50/60Hz, internally
adjustable,
25VA max. Installation Category ll.
Temperature Range: +5o
C to 40o
C operating 20 - 80% RH,
-40o
C to 70o
C storage.
Safety: Complies with EN61010-1.
EMC: Complies with EN61326.
Size: 360 x 240 x 95 mm including feet.
Weight: 2.9kg.
GwinStek LCR-08 Clip
Tweezers (1MHz)
Manufacture: GwinStek
Model: LCR-08
Warranty: 12 month
191
USD
Frequency:DC ~ 1MHz
Max. Voltage: +/- 35V
Applicable Instruments:
+ LCR-8101G/8101
+ LCR-821/819/817/816
+ LCR-829/827/826
Manufacture: Global
Model: LCR-58
Global LCR-58 Tweezer LCR
Made in
Meter with ESR
Warranty: 12 month
99 USD
Capabilities: Inductance, capacitance, resistance, diode test
Battery Indicator: Shows status of the battery
Auto Power-Off: Approx. 30 min
Frequency: 100/120 Hz, 1 kHz, 10 kHz
Inductance
+ Ranges: 600 µH, 6000 µH, 60 mH, 600 mH, 6 H, 60 H, 200
H
+ Resolution: 0.1 µH
+ Accuracy: (Q >10)
Capacitance
+ Ranges: 600 pF, 6 nF, 60 nF, 600 nF, 6 µF, 60 µF, 600 µF, 6
mF
+ Resolution: 0.1 pF
+ Accuracy: (D<0.1)
Resistance
+ Ranges: 60 Ω, 600 Ω, 6 kΩ, 60 kΩ, 600 kΩ, 6 MΩ, 20 MΩ
+ Resolution: 0.01 Ω
+ Accuracy: (Q< 0.1)
Accuracy: 1.0% ~ 3.0%
Storage Temperature: -20ºC ~ 60ºC (-4ºF ~ 104ºF)
Operating Environment: 0ºC ~ 40ºC (32ºF ~ 104ºF) at < 70%
R.H.
Power: 3.0 V button-type lithium battery ×2, CR2032
Battery Life: 50 hours continuous operation
Weight: Approx. 3.9 oz ( 110 g ) including battery
Size: 205 mm (H) × 40 mm (W) ×24.5 mm (D)
ProsKit MT-5110 3 1/2
Capacitance Meter
(0.1pF~20,000μF)
Manufacturer: Proskit
Model: MT-5110
Made in : Taiwan
Warranty: 12 Months
0 USD
Capacitance: 200pF ±(0.5%+7d),2n/20n/200n/2μ/20μ/200μF
±(0.5%+5d),
2,000μF ±(2.0%+5d),20,000μF ±(3.0%+10d)
Zero adjustment Manual (range:±20pF)
Over-input: Display shows 1
Input overload protections: Yes
Sampling time 0~5 second
EN61010-1 CE
Power source NEDA1604/6F22 (9V) x 1pcs
(Not included)
Size 182x90x46mm
Test Lead model no. MT-9906
HIOKI IM7581
IMPEDANCE ANALYZER
(100kHz to 300MHz)
Hãng sản xuất: Hioki
Xuất xứ: Nhật
Bảo hành: 12 tháng
Chế độ đo: chế độ LCR, chế độ Analyzer, chế độ đo liên tục
thông số đo: Z, Y, θ, Rs (ESR), Rp, X, G, B, C, Cp, Ls, Lp, D
(tanδ), Q
0 USD
Dải do: 100 mΩ đến 5 kΩ
Phạm vi hiển thị:
- Z: 0,00 m đến 9,99999 GΩ / Rs, Rp, X: ± (0,00 m đến
9,99999 GΩ)
- Ls, Lp: ± (0,00000 n để 9,99999 GH) / Q: ± (0,00-9999,99)
- Θ: ± (0.000 ° đến 180.000 °), Cs, Cp: ± (0,00000 p để
9,99999 GF)
- D: ± (0,00000-9,99999), Y: (0.000 n để 9,99999 GS)
- G, B: ± (0.000 n để 9,99999 GS), Δ%: ± (0,000% đến
999,999%)
Độ chính xác Z: ± 0.72% RDG. θ: ± 0,41 °
Tần số đo: 100.00 kHz to 300.00 MHz (độ phân giải 5 chữ
số) MHz
Mức tín hiệu đo:
- Công suất: -40,0 dBm đến 7,0 dBm
- Nguồn điện: 4 mV đến 1001 mVrms
- Dòng: 0.09 mA đến 20.02 mArms
- Công suất người dùng cấu hình, điện áp, và hiện tại
Trở khánng đầu ra: 50 Ω
Màn hình: 8.4-inch TFT với màn hình cảm ứng
tốc độ phân tích: FAST: 0.5 ms / MED: 0.9 ms / SLOW: 2.1
ms / SLOW2: 3.7 ms
Chức năng: kiểm tra Contact check, Comparator, BIN
measurement (classification), Panel loading/saving, Memory
function, Equivalent circuit analysis, Correlation
compensation
Giao tiếp: Handler, USB, LAN, GP-IB (optional), RS-232C
(optional)
Nguồn cung cấp: 100 đến 240 V AC, 50/60 Hz, 70 VA max.
Kích thước và khối lượng:
- Thân Máy: 215 mm (8.46 in) W × 200 mm (7.87 in) H × 268
mm (10,55 in) D, 6,5 kg (229,3 oz)
- Test head: 61 mm (2,40 in) W × 55 mm (2,17 in) H × 24 mm
(0,94 in) D, 175 g (6.2 oz)
Phụ kiện: Test head × 1, cáp kết nối × 1, Hướng dẫn sử dụng
× 1, đĩa đơn LCR (hướng dẫn sử dụng kết nối) × 1, dây điện ×
1
0 USD
HIOKI IM7580A
IMPEDANCE ANALYZER
(1 ~ 300MHz )
Manufacturer: Hioki
Model: IM7580A
Origin: Japan
Warranty: 12 months
Measurement modes: LCR mode, Analyzer mode, Continuous
measurement mode
Measurement parameters:Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs,
Cp, Ls, Lp, D (tanδ), Q
Measurable range: 100 mΩ to 5 kΩ
Display range:
- Z: 0.00 m to 9.99999 GΩ / Rs, Rp, X: ± (0.00 m to 9.99999
GΩ)
- Ls, Lp: ± (0.00000 n to 9.99999 GH) / Q: ± (0.00 to
9999.99)
- θ: ± (0.000° to 180.000°), Cs, Cp: ± (0.00000 p to 9.99999
GF)
- D: ± (0.00000 to 9.99999), Y: (0.000 n to 9.99999 GS)
- G, B: ± (0.000 n to 9.99999 GS), Δ%: ± (0.000 % to 999.999
%)
Basic accuracy Z: ±0.72 % rdg. θ: ±0.41°
Measurement frequency: 1.0000 MHz to 300.00 MHz (5
digits resolution)
Measurement signal level:
- Power: -40.0 dBm to +7.0 dBm
- Voltage: 4 mV to 1001 mVrms
- Current: 0.09 mA to 20.02 mArms
Output impedance: 50 Ω
Display: 8.4-inch color TFT with touch screen
Measurement speeds *1FAST: 0.5 ms (Analog measurement
time, typical value)
Functions: Contact check, Comparator, BIN measurement
(classification), Panel loading/saving, Memory function,
Equivalent circuit analysis, Correlation compensation
Interfaces: EXT I/O (Handler), USB communication, USB
memory, LAN, RS-232C (optional), GP-IB (optional)
Power supply: 100 to 240 V AC, 50/60 Hz, 70 VA max.
Dimensions and mass:
- Main unit: 215 mm (8.46 in) W × 200 mm (7.87 in) H × 268
mm (10.55 in) D, 6.5 kg (229.3 oz)
- Test head: 61 mm (2.40 in) W × 55 mm (2.17 in) H × 24 mm
(0.94 in) D, 175 g (6.2 oz)
Accessories: Test head ×1, Connection cable ×1, Instruction
manual ×1, LCR application disc (Communications user
manual) ×1, Power cord ×1
Model: 891
Manual: BK Precision
BK Precision 891 Bench LCR
Warranty: 12 months
Meter (300kHz)
Best accuracy 0.05%
Test frequency 20 Hz - 300 kHz
Test levels 0.5 Vrms and 1 Vrms selectable
Measurement parameters C/L/R/G/B/Y/D/Q/θ/DCR
Cs, Cp 0.000 F to ± 9999 F
Ls, Lp 0.000 H to ± 9999 H
Rs, Rp, R, Z 0.000 Ω to ± 9.999 GΩ
G, B, Y 0.000 S to ± 9.999 GS
D 0.000 to ± 9999
Q 0.000 to ± 9999
θ 0.000 ° to ± 180.00 °
DCR 0.000 Ω to ± 9.999 GΩ
1.495
USD
Impedance: 0.1 Ω – 20MΩ
Dimension (L × W × H): 258 × 113 × 381 mm
Weight: 3.4Kg
Standard Accessories User manual, power cord, Kelvin clips
(TL 889A), certificate of calibration & test report
Optional Accessories TL89F1 test fixture (axial and radial)
2.800
USD
Frequency range : 10 Hz ~ 300KHz
High Precision LCR Meter
Gwinstek LCR-6300 (300Khz,
0.05%)
OUTPUT IMPEDANCE : 30Ω / 50Ω / 100Ω selectable
BASIC ACCURACY : Slow / Med 0.05%, Fast 0.1%
TEST SPEED : FAST: 25ms / MED: 100ms / SLOW: 333ms
TEST SIGNAL LEVELS
Voltage 10.00mV- 2.00V (±10%)
2.00V(±6%)
CV :10.00mV-
Current 100.0uA- 20.00mA (±10%) CC :100.0uA20.00mA(±6%) (@2VMax)
DC BIAS : Internal ±2.5V (0.5%+0.005V)
DISPLAY RANGE
R,X,|Z| : 0.00001Ω ~ 99.9999MΩ
G,B,|Y| : 0.01nS ~ 999.999S
L : 0.00001uH ~ 9999.99H
C : 0.00001pF ~ 9999.99mF
D : 0.00001 ~ 9.99999
Q : 0.00001 ~ 99999.9
θd : -179.999° ~ 179.999°
θr : -3.14159 ~ 3.14159
DCR : 0.00001Ω ~ 99.9999MΩ
Δ% : -99999% ~ 99999%
TEST MODE : 16 Combinations Cs-Rs, Cs-D, Cp-Rp, CpD, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q,
Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR, Monitor
parameter (2 selectable) Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R,
X, G, B, Y
LISTED MODE : 10 steps
BIN FUNCTION : Comparator (9BIN,AUX:1BIN)
MEMORY
INT – panel setting 10 file name
INT – measured data 10000 Data(.csv)
USB storage 10 file name for setting, 9999 file name for data,
999 Log file for LCD screen
OTHER FUNCTION : Auto Level Control (ALC) ON/OFF
Average 1~256 times
Trigger INT / MAN / EXT / BUS
Delay 0ms~60s
Judgment PASS / FAIL
Auto LCZ ON / OFF
Screen Capture Saving in to USB (Bmp form)
DISPLAY : 3.5’ LCD, RGB color (320x240)
INTERFACE : RS-232(SCPI), Handler, USB Host
POWER SOURCE : AC 90V-250V, 50-60Hz, Max. 30VA
DIMENSION & WEIGHT : 265(W)x107(H)x312(D) mm,
Approx. 3kg
Optional Accessories
LCR-05 Test Fixture for Axial & Radial Lead
Components
LCR-06A
LCR-07
Kelvin Clip Test Lead
Test Fixture, Two-Wire with Alligator Clips
LCR-08
Test Fixture (Tweezers) for SMD/Chip
Components
LCR-15
1812)
Test Fixture for SMD/Chip Components (0201 to
LCR-16
Test Fixture – ±45V DC Bias Voltage Box
LCR-17
Test Fixture – ±2.5A DC Bias Current Box
GTL-232 RS-232C Cable, 9-pin Female to 9-pin, null
Modem for Computer, Approx. 2m
2.450
USD
Frequency range : 10 Hz ~ 200KHz
High Precision LCR Meter
LCR-6200 (200Khz, 0.05%)
OUTPUT IMPEDANCE : 30Ω / 50Ω / 100Ω selectable
BASIC ACCURACY : Slow / Med 0.05%, Fast 0.1%
TEST SPEED : FAST: 25ms / MED: 100ms / SLOW: 333ms
TEST SIGNAL LEVELS
Voltage 10.00mV- 2.00V (±10%)
2.00V(±6%)
CV :10.00mV-
Current 100.0uA- 20.00mA (±10%) CC :100.0uA20.00mA(±6%) (@2VMax)
DC BIAS : Internal ±2.5V (0.5%+0.005V)
DISPLAY RANGE
R,X,|Z| : 0.00001Ω ~ 99.9999MΩ
G,B,|Y| : 0.01nS ~ 999.999S
L : 0.00001uH ~ 9999.99H
C : 0.00001pF ~ 9999.99mF
D : 0.00001 ~ 9.99999
Q : 0.00001 ~ 99999.9
θd : -179.999° ~ 179.999°
θr : -3.14159 ~ 3.14159
DCR : 0.00001Ω ~ 99.9999MΩ
Δ% : -99999% ~ 99999%
TEST MODE : 16 Combinations Cs-Rs, Cs-D, Cp-Rp, CpD, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q,
Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR, Monitor
parameter (2 selectable) Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R,
X, G, B, Y
LISTED MODE : 10 steps
BIN FUNCTION : Comparator (9BIN,AUX:1BIN)
MEMORY
INT – panel setting 10 file name
INT – measured data 10000 Data(.csv)
USB storage 10 file name for setting, 9999 file name for data,
999 Log file for LCD screen
OTHER FUNCTION : Auto Level Control (ALC) ON/OFF
Average 1~256 times
Trigger INT / MAN / EXT / BUS
Delay 0ms~60s
Judgment PASS / FAIL
Auto LCZ ON / OFF
Screen Capture Saving in to USB (Bmp form)
DISPLAY : 3.5’ LCD, RGB color (320x240)
INTERFACE : RS-232(SCPI), Handler, USB Host
POWER SOURCE : AC 90V-250V, 50-60Hz, Max. 30VA
DIMENSION & WEIGHT : 265(W)x107(H)x312(D) mm,
Approx. 3kg
Optional Accessories
LCR-05 Test Fixture for Axial & Radial Lead
Components
LCR-06A
Kelvin Clip Test Lead
LCR-07
Test Fixture, Two-Wire with Alligator Clips
LCR-08
Test Fixture (Tweezers) for SMD/Chip
Components
LCR-15
1812)
Test Fixture for SMD/Chip Components (0201 to
LCR-16
Test Fixture – ±45V DC Bias Voltage Box
LCR-17
Test Fixture – ±2.5A DC Bias Current Box
GTL-232 RS-232C Cable, 9-pin Female to 9-pin, null
Modem for Computer, Approx. 2m
1.700
USD
Frequency range : 10 Hz ~ 100KHz
High Precision LCR Meter
LCR-6100 (100Khz, 0.05%)
OUTPUT IMPEDANCE : 30Ω / 50Ω / 100Ω selectable
BASIC ACCURACY : Slow / Med 0.05%, Fast 0.1%
TEST SPEED : FAST: 25ms / MED: 100ms / SLOW: 333ms
TEST SIGNAL LEVELS
Voltage 10.00mV- 2.00V (±10%)
2.00V(±6%)
CV :10.00mV-
Current 100.0uA- 20.00mA (±10%) CC :100.0uA20.00mA(±6%) (@2VMax)
DC BIAS : Internal ±2.5V (0.5%+0.005V)
DISPLAY RANGE
R,X,|Z| : 0.00001Ω ~ 99.9999MΩ
G,B,|Y| : 0.01nS ~ 999.999S
L : 0.00001uH ~ 9999.99H
C : 0.00001pF ~ 9999.99mF
D : 0.00001 ~ 9.99999
Q : 0.00001 ~ 99999.9
θd : -179.999° ~ 179.999°
θr : -3.14159 ~ 3.14159
DCR : 0.00001Ω ~ 99.9999MΩ
Δ% : -99999% ~ 99999%
TEST MODE : 16 Combinations Cs-Rs, Cs-D, Cp-Rp, CpD, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q,
Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR, Monitor
parameter (2 selectable) Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R,
X, G, B, Y
LISTED MODE : 10 steps
BIN FUNCTION : Comparator (9BIN,AUX:1BIN)
MEMORY
INT – panel setting 10 file name
INT – measured data 10000 Data(.csv)
USB storage 10 file name for setting, 9999 file name for data,
999 Log file for LCD screen
OTHER FUNCTION : Auto Level Control (ALC) ON/OFF
Average 1~256 times
Trigger INT / MAN / EXT / BUS
Delay 0ms~60s
Judgment PASS / FAIL
Auto LCZ ON / OFF
Screen Capture Saving in to USB (Bmp form)
DISPLAY : 3.5’ LCD, RGB color (320x240)
INTERFACE : RS-232(SCPI), Handler, USB Host
POWER SOURCE : AC 90V-250V, 50-60Hz, Max. 30VA
DIMENSION & WEIGHT : 265(W)x107(H)x312(D) mm,
Approx. 3kg
Optional Accessories
LCR-05 Test Fixture for Axial & Radial Lead
Components
LCR-06A
LCR-07
Kelvin Clip Test Lead
Test Fixture, Two-Wire with Alligator Clips
LCR-08
Test Fixture (Tweezers) for SMD/Chip
Components
LCR-15
1812)
Test Fixture for SMD/Chip Components (0201 to
LCR-16
Test Fixture – ±45V DC Bias Voltage Box
LCR-17
Test Fixture – ±2.5A DC Bias Current Box
GTL-232 RS-232C Cable, 9-pin Female to 9-pin, null
Modem for Computer, Approx. 2m
1.490
USD
Frequency range : 10 Hz ~ 20KHz
High Precision LCR Meter
LCR-6020 (20Khz, 0.05%)
OUTPUT IMPEDANCE : 30Ω / 50Ω / 100Ω selectable
BASIC ACCURACY : Slow / Med 0.05%, Fast 0.1%
TEST SPEED : FAST: 25ms / MED: 100ms / SLOW: 333ms
TEST SIGNAL LEVELS
Voltage 10.00mV- 2.00V (±10%)
2.00V(±6%)
CV :10.00mV-
Current 100.0uA- 20.00mA (±10%) CC :100.0uA20.00mA(±6%) (@2VMax)
DC BIAS : Internal ±2.5V (0.5%+0.005V)
DISPLAY RANGE
R,X,|Z| : 0.00001Ω ~ 99.9999MΩ
G,B,|Y| : 0.01nS ~ 999.999S
L : 0.00001uH ~ 9999.99H
C : 0.00001pF ~ 9999.99mF
D : 0.00001 ~ 9.99999
Q : 0.00001 ~ 99999.9
θd : -179.999° ~ 179.999°
θr : -3.14159 ~ 3.14159
DCR : 0.00001Ω ~ 99.9999MΩ
Δ% : -99999% ~ 99999%
TEST MODE : 16 Combinations Cs-Rs, Cs-D, Cp-Rp, CpD, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q,
Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR, Monitor
parameter (2 selectable) Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R,
X, G, B, Y
LISTED MODE : 10 steps
BIN FUNCTION : Comparator (9BIN,AUX:1BIN)
MEMORY
INT – panel setting 10 file name
INT – measured data 10000 Data(.csv)
USB storage 10 file name for setting, 9999 file name for data,
999 Log file for LCD screen
OTHER FUNCTION : Auto Level Control (ALC) ON/OFF
Average 1~256 times
Trigger INT / MAN / EXT / BUS
Delay 0ms~60s
Judgment PASS / FAIL
Auto LCZ ON / OFF
Screen Capture Saving in to USB (Bmp form)
DISPLAY : 3.5’ LCD, RGB color (320x240)
INTERFACE : RS-232(SCPI), Handler, USB Host
POWER SOURCE : AC 90V-250V, 50-60Hz, Max. 30VA
DIMENSION & WEIGHT : 265(W)x107(H)x312(D) mm,
Approx. 3kg
Optional Accessories
LCR-05 Test Fixture for Axial & Radial Lead
Components
LCR-06A
LCR-07
Kelvin Clip Test Lead
Test Fixture, Two-Wire with Alligator Clips
LCR-08
Test Fixture (Tweezers) for SMD/Chip
Components
LCR-15
1812)
Test Fixture for SMD/Chip Components (0201 to
LCR-16
Test Fixture – ±45V DC Bias Voltage Box
LCR-17
Test Fixture – ±2.5A DC Bias Current Box
GTL-232 RS-232C Cable, 9-pin Female to 9-pin, null
Modem for Computer, Approx. 2m
Frequency range : 10 Hz ~ 2KHz
High Precision LCR Meter
Gwinstek LCR-6002 (2Khz,
0.05%)
OUTPUT IMPEDANCE : 30Ω / 50Ω / 100Ω selectable
BASIC ACCURACY : Slow / Med 0.05%, Fast 0.1%
TEST SPEED : FAST: 25ms / MED: 100ms / SLOW: 333ms
TEST SIGNAL LEVELS
Voltage 10.00mV- 2.00V (±10%)
CV :10.00mV- 2.00V(±6%)
Current 100.0uA- 20.00mA (±10%) CC :100.0uA- 20.00mA(±6%)
(@2VMax)
DC BIAS : Internal ±2.5V (0.5%+0.005V)
DISPLAY RANGE
R,X,|Z| : 0.00001Ω ~ 99.9999MΩ
G,B,|Y| : 0.01nS ~ 999.999S
L : 0.00001uH ~ 9999.99H
C : 0.00001pF ~ 9999.99mF
D : 0.00001 ~ 9.99999
Q : 0.00001 ~ 99999.9
θd : -179.999° ~ 179.999°
θr : -3.14159 ~ 3.14159
DCR : 0.00001Ω ~ 99.9999MΩ
Δ% : -99999% ~ 99999%
TEST MODE : 16 Combinations Cs-Rs, Cs-D, Cp-Rp, Cp-D, Lp-Rp, LpQ, Ls-Rs, Ls-Q,
Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR, Monitor parameter (2
selectable) Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R, X, G, B, Y
LISTED MODE : 10 steps
BIN FUNCTION : Comparator (9BIN,AUX:1BIN)
MEMORY
INT – panel setting 10 file name
INT – measured data 10000 Data(.csv)
USB storage 10 file name for setting, 9999 file name for data, 999 Log file
for LCD screen
OTHER FUNCTION : Auto Level Control (ALC) ON/OFF
Average 1~256 times
Trigger INT / MAN / EXT / BUS
Delay 0ms~60s
Judgment PASS / FAIL
Auto LCZ ON / OFF
990
USD
Screen Capture Saving in to USB (Bmp form)
DISPLAY : 3.5’ LCD, RGB color (320x240)
INTERFACE : RS-232(SCPI), Handler, USB Host
POWER SOURCE : AC 90V-250V, 50-60Hz, Max. 30VA
DIMENSION & WEIGHT : 265(W)x107(H)x312(D) mm, Approx. 3kg
Optional Accessories
LCR-05 Test Fixture for Axial & Radial Lead Components
LCR-06A
Kelvin Clip Test Lead
LCR-07
Test Fixture, Two-Wire with Alligator Clips
LCR-08
Test Fixture (Tweezers) for SMD/Chip Components
LCR-15 Test Fixture for SMD/Chip Components (0201 to 1812)
LCR-16
Test Fixture – ±45V DC Bias Voltage Box
LCR-17 Test Fixture – ±2.5A DC Bias Current Box
GTL-232 RS-232C Cable, 9-pin Female to 9-pin, null Modem for
Computer, Approx. 2m
Instek LCR-800 Series Specifications
GWinstek LCR-819 High
Precision LCR Meter
TEST FREQUENCY
1.545
USD
12Hz ~ 200kHz (504 steps) for LCR821
12Hz ~ 100kHz(503 steps) for LCR819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for
LCR-821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for
LCR-816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation
Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle
(Degree)
θ -180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage
Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
Approx. 5.5kg

Chroma 3312 Telecom
Transformer Test System














Chroma 3302 Transformer
Test System / Component
Analyzer




















Chroma 3252 Transformer
Test System / Component
Analyzer




ncludes most test items in telecommunication transformer
inspection
Programmable frequency : 20Hz~1MHz, 0.02% accuracy
Basic accuracy : 0.1%
3 different output impedance modes, measurement results are
compatible with other well-known LCR meters
Enhanced Turn Ratio measurement accuracy for low permeability
core
ast Inductance/ Turn Ratio measurement speed up to 80 meas./sec
Fast DCR measurement speed up to 50 meas./sec
1320 Bias Current Source directly control capability
320x240 dot-matrix LCD display
Support versatile standard and custom-design test jigs
Four-terminal test for accurate, stable DCR, inductance and turn
ratio measurements
Built-in comparator; 10 bin sorting with counter capability
4M SRAM memory card, for setup back-up between units
Standard RS-232, Handler and Printer interface, option GPIB
Interface for LCR function only
15 internal instrument setups for store/recall capability
0 USD
Test frequency: 20Hz~200kHz/1MHz, 0.02% accuracy
Basic accuracy: 0.1%
Different output impedance modes, measurement results are
compatible with other well-known LCR meters
Enhanced Turn Ratio measurement accuracy for low permeability
core
Fast Inductance/ Turn Ratio measurement speed up to 80
meas./sec
Fast DCR measurement speed up to 50 meas./sec
Graphical and tabular display of swept frequency, voltage current
and bias current measurements (3252/3302)
Build-in 8mA bias for RJ45 transmission transformer saturation
condition (option)
Leakage inductance 100 bin sorting and balance of leakage
inductance for TV inverter transformer
ALC (Auto Level Compensation) function for MLCC
measurement (3252/3302)
Test fixture residual capacitance compensation for transformer
inductance measurement
1320 Bias Current Source directly control capability (3252/3302)
320x240 dot-matrix LCD display
Support versatile standard and custom-design test jigs
Four-terminal test for accurate, stable DCR, inductance and turn
ratio measurements
Built-in comparator; 10 bin sorting with counter capability
(3252/3302)
Lk standard value with Lx measure value
4M SRAM memory card, for setup back-up between units
Standard RS-232, Handler, and Printer Interface, option GPIB
Interface for LCR function only
15 internal instrument setups for store/recall capability
0 USD
Test frequency: 20Hz~200kHz/1MHz, 0.02% accuracy
Basic accuracy: 0.1%
Different output impedance modes, measurement results are
compatible with other well-known LCR meters
Enhanced Turn Ratio measurement accuracy for low permeability
core
0 USD
















Chroma 3250 Transformer
Test System / Component
Analyzer




















Fast Inductance/ Turn Ratio measurement speed up to 80
meas./sec
Fast DCR measurement speed up to 50 meas./sec
Graphical and tabular display of swept frequency, voltage current
and bias current measurements (3252/3302)
Build-in 8mA bias for RJ45 transmission transformer saturation
condition (option)
Leakage inductance 100 bin sorting and balance of leakage
inductance for TV inverter transformer
ALC (Auto Level Compensation) function for MLCC
measurement (3252/3302)
Test fixture residual capacitance compensation for transformer
inductance measurement
1320 Bias Current Source directly control capability (3252/3302)
320x240 dot-matrix LCD display
Support versatile standard and custom-design test jigs
Four-terminal test for accurate, stable DCR, inductance and turn
ratio measurements
Built-in comparator; 10 bin sorting with counter capability
(3252/3302)
Lk standard value with Lx measure value
4M SRAM memory card, for setup back-up between units
Standard RS-232, Handler, and Printer Interface, option GPIB
Interface for LCR function only
15 internal instrument setups for store/recall capability
Test frequency: 20Hz~200kHz/1MHz, 0.02% accuracy
Basic accuracy: 0.1%
Different output impedance modes, measurement results are
compatible with other well-known LCR meters
Enhanced Turn Ratio measurement accuracy for low permeability
core
Fast Inductance/ Turn Ratio measurement speed up to 80
meas./sec
Fast DCR measurement speed up to 50 meas./sec
Graphical and tabular display of swept frequency, voltage current
and bias current measurements (3252/3302)
Build-in 8mA bias for RJ45 transmission transformer saturation
condition (option)
Leakage inductance 100 bin sorting and balance of leakage
inductance for TV inverter transformer
ALC (Auto Level Compensation) function for MLCC
measurement (3252/3302)
Test fixture residual capacitance compensation for transformer
inductance measurement
1320 Bias Current Source directly control capability (3252/3302)
320x240 dot-matrix LCD display
Support versatile standard and custom-design test jigs
Four-terminal test for accurate, stable DCR, inductance and turn
ratio measurements
Built-in comparator; 10 bin sorting with counter capability
(3252/3302)
Lk standard value with Lx measure value
4M SRAM memory card, for setup back-up between units
Standard RS-232, Handler, and Printer Interface, option GPIB
Interface for LCR function only
15 internal instrument setups for store/recall capability
0 USD
Chroma 13350 Automatic
Transformer Tester





0 USD



est frequency 20Hz ~ 200kHz
Turn Ratio, Phase, L, Q, Lk, ACR, DCR, Cp,Pin short, Balance
Basic accuracy : 0.1%
Three different output impedance modes
Scan unit/box including :
- 20ch scan test unit
- 80ch* scan box
- C.T.* test fixture
Compensation for individual channel
*Combine measurement unit with scanbox to reduce
measurement errors
*USB storage interface
*10-100 LAN/ USB-H interface (option)
*Built-in programmable 100mA bias current (RJ-45)
*Test frequency, voltage and speed set separately
*Fail Lock function
*Auto Test function
*Equipped with external standard test on 20ch scan test unit
*Reduce the short-circuit loss in secondary side for leakage (Lk)
test (A133502 20ch scan unit)
*Short-circuit pin selectable for every test item
*Multiple language: English & Simplified Chinese
*RS232 interface compatible SCPI commands








Test frequencies: 100Hz, 120Hz, 1kHz
Basic accuracy: 0.1%
High measurement speed: 5ms in 1kHz, 15ms in 100Hz/120Hz
Large LCD display (240x64 dot-matrix)
Wide measurement range: 0.1pF ~ 3.999F
Standard Handler interface
Comparator and pass/fail alarming beeper function
Setups backup function
0 USD


0.1% basic accuracy
Transformer test parameters (11025), Turns Ratio, DCR, Mutual
Inductance
0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz,
100kHz test frequencies
21ms measurement time (≧100Hz)
Agilent 4263B LCR Meter commands compatible
4 different output resistance modes selectable for non-linear
inductor and capacitor measuring
High resolution in low impedance(0.01mΩ) and high accuracy
0.3% till 100mΩ range
Adjustable DC bias current up to 200mA (constant 25Ω) (11025)
1320 Bias Current Source directly control capability
0.01mΩ ~ 99.99MΩ wide measurement range (4 1/2 digits)
Dual frequency function (11022 option) for automatic production
BIAS comparator function
Comparator function and 8/99 bin-sorting function
Pass/fail judge result for automatic production
Handler interface trigger edge (rising/falling) programmable
Test signal level monitor function
Standard GPIB (IEEE-488) and handler interface, option RS 232
I/F
Open/short zeroing, load correction
LabView® Driver
0 USD










Chroma 11020 Capacitance
Meter
Chroma 11025 LCR Meter



















Chroma 11022 LCR Meter

















Chroma 11021-L LCR Meter















Chroma 11021 LCR Meter














0.1% basic accuracy
0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz,
100kHz test frequencies
21ms measurement time (≧100Hz)
Agilent 4263B LCR Meter commands compatible
4 different output resistance modes selectable for non-linear
inductor and capacitor measuring
High resolution in low impedance(0.01mΩ) and high accuracy
0.3% till 100mΩ range
Adjustable DC bias current up to 200mA (constant 25Ω) (11025)
1320 Bias Current Source directly control capability
0.01mΩ ~ 99.99MΩ wide measurement range (4 1/2 digits)
Dual frequency function (11022 option) for automatic production
BIAS comparator function
Comparator function and 8/99 bin-sorting function
Pass/fail judge result for automatic production
Handler interface trigger edge (rising/falling) programmable
Test signal level monitor function
Standard GPIB (IEEE-488) and handler interface, option RS 232
I/F
Open/short zeroing, load correction
LabView® Driver
0 USD
Test frequencies:
1kHz, 10kHz, 40kHz, 50kHz (11021-L)
Basic accuracy: 0.1% (11021), 0.2% (11021-L)
0.1mΩ~99.99 MΩ measurement range, 4 1/2 digits resolution
Lower harmonic-distortion affection
Fast measurement speed (75ms)
Standard RS-232 interface
Optional GPIB & Handler interface
Programmable trigger delay time is convenient for measurement
timing adjustment in automatic production
Bin-sorting function
Comparator and pass/fail alarming beeper function
Text mode 40x4 matrixes LCD display
Friendly user interface
Open/short zeroing
On-line fireware refreshable (via RS-232)
Input protection (1 Joule)
0 USD
Test frequencies:
100Hz, 120Hz, 1kHz and 10kHz (9.6kHz)
Basic accuracy: 0.1% (11021), 0.2% (11021-L)
0.1mΩ~99.99 MΩ measurement range, 4 1/2 digits resolution
Lower harmonic-distortion affection
Fast measurement speed (75ms)
Standard RS-232 interface
Optional GPIB & Handler interface
Programmable trigger delay time is convenient for measurement
timing adjustment in automatic production
Bin-sorting function
Comparator and pass/fail alarming beeper function
Text mode 40x4 matrixes LCD display
Friendly user interface
Open/short zeroing
On-line fireware refreshable (via RS-232)
Input protection (1 Joule)
0 USD
Chroma 11050 HF LCR
Meter












Test Parameter: L/C/R/Z/Y/DCR/Q/D/ θ
Test Frequency: 1kHz ~ 10MHz
Test Level: 10mV ~ 5V
Basic Accuracy: 0.1%
15ms fast speed measurement
3 output impedance modes
Test signal monitoring function
Compare & bin-sorting function
Open/short zeroing & load correction function
Detached measurement & display unit design
Standard Handler, RS-232C, USB storage & external bias current
control interface
Optional GPIB or LAN interface
1.182
USD
TEST FREQUENCY
LCR-826 2kHz High
Precision LCR Meter with
Handler Interface
0 USD
12Hz ~ 200kHz (504 steps) for LCR-821
12Hz ~ 100kHz(503 steps) for LCR819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for LCR821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for LCR816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle (Degree)
θ
-180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
Approx. 5.5kg
820
USD
TEST FREQUENCY
LCR-816 2kHz High
Precision LCR Meter
12Hz ~ 200kHz (504 steps) for LCR-821
12Hz ~ 100kHz(503 steps) for LCR819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for LCR821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for LCR816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle (Degree)
θ
-180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
Approx. 5.5kg
1.727
USD
TEST FREQUENCY
LCR-827 10kHz High
Precision LCR Meter with
Handler Interface
12Hz ~ 200kHz (504 steps) for LCR-821
12Hz ~ 100kHz(503 steps) for LCR819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for LCR821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for LCR816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle (Degree)
θ
-180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
Approx. 5.5kg
1.358
USD
TEST FREQUENCY
LCR-817 10kHz High
Precision LCR Meter
12Hz ~ 200kHz (504 steps) for LCR-821
12Hz ~ 100kHz(503 steps) for LCR819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for LCR821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for LCR816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle (Degree)
θ
-180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
Approx. 5.5kg
1.909
USD
TEST FREQUENCY
LCR-829 100kHz High
Precision LCR Meter with
Handler Interface
12Hz ~ 200kHz (504 steps) for LCR-821
12Hz ~ 100kHz(503 steps) for LCR819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for LCR821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for LCR816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle (Degree)
θ
-180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
2.222
USD
TEST FREQUENCY
LCR-821 200kHz High
Precision LCR Meter with
RS-232
12Hz ~ 200kHz (504 steps) for LCR-821
12Hz ~ 100kHz(503 steps) for LCR-
819/829
12Hz ~ 10kHz(489 steps) for LCR817/827
100Hz ~2kHz (245 steps) for LCR816/826
BASIC ACCURACY (*)
0.05% for basic accuracy for LCR821/819/817
0.1% for basic accuracy for LCR829/827/826/816
TEST SPEED
68ms for LCR-821/819/817/816, 34ms
for LCR-829/827/826
TEST SIGNAL LEVELS
5mV ~ 1.275Vrms ( 5mV/step ) for LCR821/819/829/817/827
0.1V ~ 1.275Vrms ( 5mV/step )for LCR816/826
DC BIAS
Internal
2V
External
0 ~ 35V for LCR-821; 0 ~ 30V for LCR819/829/817/827/816/826
DISPLAY RANGE (**)
Resistance
R 0.00001Ω ~ 99999kΩ
Capacitance
C 0.00001pF ~ 99999uF
Inductance
L 0.00001mH ~ 99999H
Quality Factor
Q 0.0001 ~ 9999
Dissipation Factor
D 0.0001 ~ 9999
Impedance
|Z| 0.00001Ω ~ 99999kΩ for LCR-821
Phase Angle (Degree)
θ
-180.00° ~ 180.00° for LCR-821
TEST MODE
R/Q, C/D, C/R, L/Q,
Z/θ, L/R for LCR-821 only
EQUIVALENT CIRCUIT
Parallel or series selectable
MEMORY
100 memory blocks total
AVERAGE
1 to 255 times
TEST SPEED MODE
SLOW, MEDIUM and FAST
DISPLAY MODE
Value, △, △%
DISPLAY
240 x 128 dot matrix C.C.F.L back light
LCD
INTERFACE
Standard : RS-232C for LCR-821
Standard : Handler Interface for LCR829/827/826
Optional : RS-232C Interface for LCR819/817/816
(Including LCR-Viewer Software for RS232C interface)
POWER SOURCE
Line Voltage Range
100V - 240V, 47-63Hz/400Hz
DIMENSIONS & WEIGHT
330(W) x 149(H) x 437(D)mm
Approx. 5.5kg
9.500
USD
TEST FREQUENCY
LCR-8110G 10 MHz
Precision LCR Meter
20Hz ~ 10 / 5 / 1 MHz, 5 Digits, ±0.005%
INPUT IMPEDANCE
100Ω
BASIC ACCURACY (*)
±0.1% (R, Z, X, G, Y, B, L, C)
TEST SPEED
AC (＞ 2kHz)
DC
MAX: 75mS
MAX: 30mS
FAST: 150mS
FAST: 60mS
MEDIUM: 450mS
MEDIUM: 120mS
SLOW: 600mS
SLOW: 900mS
TEST SIGNAL LEVELS
≦3MHz：10mV~2Vrms, 1mV/Step or 10mV/Step, 2%±5mV
＞3MHz：10mV~1Vrms, 1mV/Step or 10mV/Step, 2%±5mV
SHORT CIRCUIT CURRENT
Max. 20mA
MEASUREMENT RANGES
R, Z, X
0.1mΩ ~ 100MΩ
G, Y, B
10nS ~ 1000S
L
0.1nH ~ 100kH
C
0.01pF ~ 1F
D
0.00001 ~ 9.9999
Q
0.1 ~ 9999.9
θ
-180° ~ +180°
Rdc
0.1mΩ ~ 100MΩ
MEASUREMENT PARAMETERS
Impedance (Z), Phase Angle (θ), Inductance (L), Capacitance (C), AC
Resistance (Rac), Quality Factor (Q), Dissipation Factor (D), Admittance
(Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance
(Rdc)
SERIES OR PARALLEL EQUIVALENT CIRCUIT
C + R, C + D, C + Q, L + R, L + Q, L + D
SERIES EQUIVALENT CIRCUIT ONLY
X + R, X + D, X + Q
PARALLEL EQUIVALENT CIRCUIT ONLY
C + G, B + G, B + D, B + Q, B + R, L + G
POLAR FORM
Z + Phase Angle, Y + Phase Angle
AVERAGE
1 ~ 256 TIMES
LCD DISPLAY
320 x 240 DOT-MATRIX
INTERFACE
RS-232, GPIB
POWER SOURCE
AC 115V(+10% / -25%), 230V(+15% / -14%) (Selectable), 50/60Hz
DIMENSIONS & WEIGHT
330(W) x 170(H) x 340(D)mm, Approx. 5kg
7.800
USD
TEST FREQUENCY
Gw instek LCR-8105G 5
MHz Precision LCR Meter
20Hz ~ 10 / 5 / 1 MHz, 5 Digits, ±0.005%
INPUT IMPEDANCE
100Ω
BASIC ACCURACY (*)
±0.1% (R, Z, X, G, Y, B, L, C)
TEST SPEED
AC (＞ 2kHz)
DC
MAX: 75mS
MAX: 30mS
FAST: 150mS
FAST: 60mS
MEDIUM: 450mS
MEDIUM: 120mS
SLOW: 600mS
SLOW: 900mS
TEST SIGNAL LEVELS
≦3MHz：10mV~2Vrms, 1mV/Step or 10mV/Step, 2%±5mV
＞3MHz：10mV~1Vrms, 1mV/Step or 10mV/Step, 2%±5mV
SHORT CIRCUIT CURRENT
Max. 20mA
MEASUREMENT RANGES
R, Z, X
0.1mΩ ~ 100MΩ
G, Y, B
10nS ~ 1000S
L
0.1nH ~ 100kH
C
0.01pF ~ 1F
D
0.00001 ~ 9.9999
Q
0.1 ~ 9999.9
θ
-180° ~ +180°
Rdc
0.1mΩ ~ 100MΩ
MEASUREMENT PARAMETERS
Impedance (Z), Phase Angle (θ), Inductance (L), Capacitance (C), AC
Resistance (Rac), Quality Factor (Q), Dissipation Factor (D), Admittance
(Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance
(Rdc)
SERIES OR PARALLEL EQUIVALENT CIRCUIT
C + R, C + D, C + Q, L + R, L + Q, L + D
SERIES EQUIVALENT CIRCUIT ONLY
X + R, X + D, X + Q
PARALLEL EQUIVALENT CIRCUIT ONLY
C + G, B + G, B + D, B + Q, B + R, L + G
POLAR FORM
Z + Phase Angle, Y + Phase Angle
AVERAGE
1 ~ 256 TIMES
LCD DISPLAY
320 x 240 DOT-MATRIX
INTERFACE
RS-232, GPIB
POWER SOURCE
AC 115V(+10% / -25%), 230V(+15% / -14%) (Selectable), 50/60Hz
DIMENSIONS & WEIGHT
330(W) x 170(H) x 340(D)mm, Approx. 5kg
6.615
USD
TEST FREQUENCY
Gw instek LCR-8101G 1
MHz Precision LCR Meter
20Hz ~ 10 / 5 / 1 MHz, 5 Digits, ±0.005%
INPUT IMPEDANCE
100Ω
BASIC ACCURACY (*)
±0.1% (R, Z, X, G, Y, B, L, C)
TEST SPEED
AC (＞ 2kHz)
DC
MAX: 75mS
MAX: 30mS
FAST: 150mS
FAST: 60mS
MEDIUM: 450mS
MEDIUM: 120mS
SLOW: 600mS
SLOW: 900mS
TEST SIGNAL LEVELS
≦3MHz：10mV~2Vrms, 1mV/Step or 10mV/Step, 2%±5mV
＞3MHz：10mV~1Vrms, 1mV/Step or 10mV/Step, 2%±5mV
SHORT CIRCUIT CURRENT
Max. 20mA
MEASUREMENT RANGES
R, Z, X
0.1mΩ ~ 100MΩ
G, Y, B
10nS ~ 1000S
L
0.1nH ~ 100kH
C
0.01pF ~ 1F
D
0.00001 ~ 9.9999
Q
0.1 ~ 9999.9
θ
-180° ~ +180°
Rdc
0.1mΩ ~ 100MΩ
MEASUREMENT PARAMETERS
Impedance (Z), Phase Angle (θ), Inductance (L), Capacitance (C), AC
Resistance (Rac), Quality Factor (Q), Dissipation Factor (D), Admittance
(Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance
(Rdc)
SERIES OR PARALLEL EQUIVALENT CIRCUIT
C + R, C + D, C + Q, L + R, L + Q, L + D
SERIES EQUIVALENT CIRCUIT ONLY
X + R, X + D, X + Q
PARALLEL EQUIVALENT CIRCUIT ONLY
C + G, B + G, B + D, B + Q, B + R, L + G
POLAR FORM
Z + Phase Angle, Y + Phase Angle
AVERAGE
1 ~ 256 TIMES
LCD DISPLAY
320 x 240 DOT-MATRIX
INTERFACE
RS-232, GPIB
POWER SOURCE
AC 115V(+10% / -25%), 230V(+15% / -14%) (Selectable), 50/60Hz
DIMENSIONS & WEIGHT
330(W) x 170(H) x 340(D)mm, Approx. 5kg
LCR-916
LCR-915 10kHz Hand-held
LCR Meter
LCR-915
LCR-914
TEST FREQUENCY
100Hz/120Hz/1k/10k/10 100Hz/120Hz/1k/10 100Hz/120Hz/1
0kHz
kHz
kHz
selectable
Selectable
Selectable
FULL SCALE
Main
20,000/2,000 counts selectable
Display
Sub
2,000 counts
Display
INDUCTANCE
Range
20uH ~ 20kH depends on the selected test frequency
Best
+(0.2% rdg + 2 digits)
Accurac
y
Resoluti 0.001uH ~ 0.001kH depends on selected range
on
CAPACITANCE
Range
20pF ~ 20mF depends on the selected test frequency
Best
+(0.2% rdg + 2 digits)
Accurac
y
Resoluti 0.001pF ~ 0.001mF depends on selected range
on
RESISTANCE
Range
20Ω ~ 200MΩ depends on the selected test frequency
Best
+(0.2% rdg+ 2 digits)
Accurac
y
Resoluti 0.001Ω ~ 0.01MΩ depends on selected range
on
DC RESISTANCE
Range
200Ω ~ 200MΩ
Best
+(0.2% rdg+ 2 digits)
Accurac
y
Resoluti 0.01Ω ~ 0.01MΩ depends on selected range
on
QUALITY FACTOR (Q)
Range
0.000 ~ 999
260
USD
Accurac 2 x (main parameter accuracy)
y
Best
0.001
Resoluti
on
DISSIPATION FACTOR (D)
Range
0.000 ~ 999
Accurac 2 x (main parameter accuracy)
y
Best
0.001
Resoluti
on
PHASE ANGLE (θ)
Range
-90° ~ 90°
Accurac +(0.2% rdg+ 5 digits)
y
Resoluti 0.1°
on
MEASUREMENT CIRCUIT
Parallel or Series selectable
AUTO LCR MODE
Automatically identifies and measures the DUT when the meter
is switch on
SORTING MODE
+0.1%, +0.2%, +0.25%, +0.5%, +1.0%, +2.0%, +5.0%,
+10.0%, +20.0%, +80%/-20% Selectable
OTHER FUNCTIONS
Auto range, Auto backlit, Max, Min, Data hold, Zero, Auto
power off, 46 segments analogue bar
DISPLAY
LCD mono display
INTERFACE
USB
POWER SOURCE
AA Battery 1.5V x 4 or DC 5V(through AC adapter or USB
cable)
DIMENSIONS & WEIGHT
95(W) × 207(H) × 52(D) mm, Approx. 630g
Gw instek LCR-916 LCR
Meter ( 100kHz, 0.2%)
Model: LCR-916
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
Accessories: Shorting Cube, 2Wire Alligator Clip Set, Battery, User
Manual
Options: Magnetic Hang Kit, SMD Test Probe, AC Adapter, USB Cable,
4Wire DIP Clip Set
LCR-916
TEST FREQUENCY
100Hz/120Hz/1k/10k/100kHz
selectable
FULL SCALE
Main Display 20,000/2,000 counts selectable
350
USD
Sub Display
2,000 counts
INDUCTANCE
Range
20uH ~ 20kH depends on the selected test
frequency
Best
Accuracy
+(0.2% rdg + 2 digits)
Resolution
0.001uH ~ 0.001kH depends on selected range
CAPACITANCE
Range
20pF ~ 20mF depends on the selected test
frequency
Best
Accuracy
+(0.2% rdg + 2 digits)
Resolution
0.001pF ~ 0.001mF depends on selected range
RESISTANCE
Range
20Ω ~ 200MΩ depends on the selected test
frequency
Best
Accuracy
+(0.2% rdg+ 2 digits)
Resolution
0.001Ω ~ 0.01MΩ depends on selected range
DC RESISTANCE
Range
200Ω ~ 200MΩ
Best
Accuracy
+(0.2% rdg+ 2 digits)
Resolution
0.01Ω ~ 0.01MΩ depends on selected range
QUALITY FACTOR (Q)
Range
0.000 ~ 999
Accuracy
2 x (main parameter accuracy)
Best
Resolution
0.001
DISSIPATION FACTOR (D)
Range
0.000 ~ 999
Accuracy
2 x (main parameter accuracy)
Best
Resolution
0.001
PHASE ANGLE (θ)
Range
-90° ~ 90°
Accuracy
+(0.2% rdg+ 5 digits)
Resolution
0.1°
MEASUREMENT CIRCUIT
Parallel or Series selectable
AUTO LCR MODE
Automatically identifies and measures the DUT when
the meter is switch on
SORTING MODE
+0.1%, +0.2%, +0.25%, +0.5%, +1.0%, +2.0%,
+5.0%, +10.0%, +20.0%, +80%/-20% Selectable
OTHER FUNCTIONS
Auto range, Auto backlit, Max, Min, Data hold, Zero,
Auto power off, 46 segments analogue bar
DISPLAY
LCD mono display
INTERFACE
USB
POWER SOURCE
AA Battery 1.5V x 4 or DC 5V(through AC adapter or
USB cable)
DIMENSIONS & WEIGHT
95(W) × 207(H) × 52(D) mm, Approx. 630g
Gw instek LCR-914 LCR
Meter ( 1kHz, 0.2%)
Model: LCR-914
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
Accessories: Shorting Cube, 2Wire Alligator Clip Set, Battery, User
Manual
Options: Magnetic Hang Kit, SMD Test Probe, AC Adapter, USB Cable,
4Wire DIP Clip Set
LCR-914
TEST FREQUENCY
100Hz/120Hz/1kHz
Selectable
FULL SCALE
Main Display 20,000/2,000 counts selectable
Sub Display
2,000 counts
INDUCTANCE
Range
20uH ~ 20kH depends on the selected test
frequency
Best Accuracy +(0.2% rdg + 2 digits)
Resolution
0.001uH ~ 0.001kH depends on selected range
CAPACITANCE
Range
20pF ~ 20mF depends on the selected test
frequency
Best Accuracy +(0.2% rdg + 2 digits)
Resolution
0.001pF ~ 0.001mF depends on selected range
RESISTANCE
Range
20Ω ~ 200MΩ depends on the selected test
frequency
Best Accuracy +(0.2% rdg+ 2 digits)
Resolution
0.001Ω ~ 0.01MΩ depends on selected range
DC RESISTANCE
Range
200Ω ~ 200MΩ
Best Accuracy +(0.2% rdg+ 2 digits)
Resolution
0.01Ω ~ 0.01MΩ depends on selected range
QUALITY FACTOR (Q)
Range
0.000 ~ 999
Accuracy
2 x (main parameter accuracy)
Best
Resolution
0.001
DISSIPATION FACTOR (D)
Range
0.000 ~ 999
Accuracy
2 x (main parameter accuracy)
Best
Resolution
0.001
200
USD
PHASE ANGLE (θ)
Range
-90° ~ 90°
Accuracy
+(0.2% rdg+ 5 digits)
Resolution
0.1°
MEASUREMENT CIRCUIT
Parallel or Series selectable
AUTO LCR MODE
Automatically identifies and measures the DUT when
the meter is switch on
SORTING MODE
+0.1%, +0.2%, +0.25%, +0.5%, +1.0%, +2.0%,
+5.0%, +10.0%, +20.0%, +80%/-20% Selectable
OTHER FUNCTIONS
Auto range, Auto backlit, Max, Min, Data hold, Zero,
Auto power off, 46 segments analogue bar
DISPLAY
LCD mono display
INTERFACE
USB
POWER SOURCE
AA Battery 1.5V x 4 or DC 5V(through AC adapter or
USB cable)
DIMENSIONS & WEIGHT
95(W) × 207(H) × 52(D) mm, Approx. 630g
Test frequency: 100 Hz, 120 Hz, 1kHz, 10Khz
Measurements: Z/L/C/R/D/Q/θ/ESR
KEYSIGHT U1732C
Resistance: 2 Ω, 20 Ω, 200 Ω, 2000 Ω, 20 kΩ, 200 kΩ, 2000
Handheld LCR Meter
(100Hz, 120Hz, 1kHz, 10kHz) kΩ, 2000 kΩ, 20 MΩ, 200 MΩ
Accuracy: 0.2-0.7%
Capacitance: 20 pF, 200 pF 2000 pF, 0.1 pF, 20 nF, 200 nF,
2000 nF, 20 μF, 200 μF, 2000 μF, 20 mF
Accuracy: 0.2-0.5%
Inductance: 20 μH, 200 μH, 2000 μH, 20 mH, 200 mH, 2000
mH, 20 H, 200 H, 2000 H
Accuracy: 0.2-1%
Phase Angle of Impedance: –180o ~180 o
Impedance Zx: 1999.9 Ω, 199.9 Ω, 19.9 Ω, 1.9 Ω
Quality Factor Z, L, C: 0.001~999
Power supply: Single standard 9 V battery (alkaline or carbonzinc) or optional power adaptor
Dimensions (H x W x D): 184 mm x 87 mm x 41 mm
include: Quick Start Guide, Certificate of Calibration (CoC),
Alligator clip leads, 9 V alkaline battery
Manufacturer: KEYSIGHT - USA
Resistance meter Hioki
RM3548
- Manufacturer: Hioki
- Model: RM3548
- Made in: Japan
Specifiction
- Resistnce range:
386
USD
0 USD
+3 mO (Max:3.5mO, resolution 0.1µO)
+3 MO (Max:3.5MO, resolution 100O)
- Accuracy: ±0.02 % rdg. ±0.007 % f.s
- Testing current:
+ 1A DC( ? thang 3mO)
+ 500nA DC(? thang 3MO)
- Open-terminal voltage: Max 5.5 V DC
- Temperature measurement: -10.0 to 99.9°C, Accuracy:
±0.5°C
- Measurement speed: Fixed
- Display refresh rate:
+ Without OVC~100ms
+ With OVC~230ms
- Function:
+ Temperature correction, temperature conversion
+ Offset voltage compensation (OVC)
+ Comparator(ABS/REF%), length conversion
+ Auto hold, Auto power save (APS)
- Memory storge:
+ 1000 interval~ 6000 interval : 0.2 to 10s (steps 0.2s)
+ Accquisition os data from memory: display, USB
(CSV,TXT files)
- Other function:
+ Averaging, USB communication interfce.
- Power supply: Pin LR6(AA)*8, Continuous use: 10h, Rate
power consumption: 5VA
- Dimensions: 192x121x55mm
- Mass:770g
- Supplied Accessories:
+ Clip type lead 9287-10 ×1, Temperature sensor Z2002 ×1
+ LR6 ×8 battery, Intruction manual x1, Cable USB x1
+ STrap x1, Fuse x1
- The warranty period: 12 month
Test frequency: 100 Hz, 120 Hz, 1kHz, 10Khz, 100Khz
Measurements: Z/L/C/R/D/Q/θ/ESR/DCR
KEYSIGHT U1733C
Resistance: 2 Ω, 20 Ω, 200 Ω, 2000 Ω, 20 kΩ, 200 kΩ, 2000
Handheld LCR Meter
(100Hz,120Hz,1kHz,10kHz,10 kΩ, 2000 kΩ, 20 MΩ, 200 MΩ
Accuracy: 0.2-0.7%
0kHz)
Capacitance: 20 pF, 200 pF 2000 pF, 0.1 pF, 20 nF, 200 nF,
2000 nF, 20 μF, 200 μF, 2000 μF, 20 mF
Accuracy: 0.2-0.5%
Inductance: 20 μH, 200 μH, 2000 μH, 20 mH, 200 mH, 2000
mH, 20 H, 200 H, 2000 H
Accuracy: 0.2-1%
Phase Angle of Impedance: –180o ~180 o
Impedance Zx: 1999.9 Ω, 199.9 Ω, 19.9 Ω, 1.9 Ω
Quality Factor Z, L, C: 0.001~999
Power supply: Single standard 9 V battery (alkaline or carbonzinc) or optional power adaptor
Dimensions (H x W x D): 184 mm x 87 mm x 41 mm
include: Quick Start Guide, Certificate of Calibration (CoC),
Alligator clip leads, 9 V alkaline battery
Manufacturer: KEYSIGHT - USA
0 USD
Microtest 6379 Impendance
Analyzer (10MHz)
Microtest 6378 Impendance
Analyzer (5MHz)
Manufacturer: Microtest
Model: 6379
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement Circuit：
Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 10MHz
+ Frequncey Step Resolutin: 5 Digits
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
+ C: 0.01pF ~ 1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 150x440x525mm
Weight: 9kgs
Include: BNC Kelvin Clips With High Frequency F423901
13.750
USD
Manufacturer: Microtest
Model: 6378
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement Circuit：
11.500
USD
Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 5MHz
+ Frequncey Step Resolutin: 5 Digits
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
+ C: 0.01pF ~ 1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 150x440x525mm
Weight: 9kgs
Include: BNC Kelvin Clips With High Frequency F423901
Microtest 6377 LCR Meter
(1MHz)
Manufacturer: Microtest
Model: 6377
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement Circuit：Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 1MHz
+ Frequncey Step Resolutin: 5 Digits
6.500
USD
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
+ C: 0.01pF ~ >1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 100x340x330mm
Weight: 6.5kgs
Include: BNC Kelvin Clips With High Frequency (F423901)
Microtest 6376 LCR Meter
(500kHz)
Manufacturer: Microtest
Model: 6376
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement Circuit：Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 500KHz
+ Frequncey Step Resolutin: 5 Digits
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
5.125
USD
+ C: 0.01pF ~ >1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 100x340x330mm
Weight: 6.5kgs
Include: BNC Kelvin Clips F423501
Microtest 6375 LCR Meter
(200kHz)
Manufacturer: Microtest
Model: 6375
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement Circuit：Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 200KHz
+ Frequncey Step Resolutin: 5 Digits
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
+ C: 0.01pF ~ >1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
4.625
USD
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 100x340x330mm
Weight: 6.5kgs
Include: BNC Kelvin Clips F423501
Microtest 6373 LCR Meter
(20kHz)
Manufacturer: Microtest
Model: 6373
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement
Circuit：Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 20KHz
+ Frequncey Step Resolutin: 5 Digits
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
+ C: 0.01pF ~ >1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
2.250
USD
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 100x340x330mm
Weight: 6.5kgs
Include: BNC Kelvin Clips F423501
Microtest 6374 LCR Meter
(100kHz)
Manufacturer: Microtest
Model: 6374
- MEasurement parameters:
｜Z｜,｜Y｜,θ, R, X, G, B, L, C, Q, D, ESR, DCR
measurement
Circuit：Series/Parallel
- Mathematical Functions:
+ absolute/percent deviation
- Test Frequency: 20Hz ~ 100KHz
+ Frequncey Step Resolutin: 5 Digits
+ Frequency Accuracy: ±0.01%
+ Output Impendance: 100Ω
+ AC Drive Level: 10mV 至 2Vrms (1mVrms steps)
- Measurement Range:
+｜Z｜ R X: 0.1 mΩ ~ 100MΩ
+｜Y｜ G B: 10nS ~ 1000S
+ C: 0.01pF ~ >1F
+ L: 0.01nH - 100KH
+ D: 0.00001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ Θ: -180° ~ +180°
+ DCR: 0.1mΩ ~ 100MΩ
+ Δ%: -999.99% ~ 999.99%
- Basic Accuracy ±0.1% ｜Z｜,R,X,｜Y｜,G,B,C,L
- Measurement Time
+ Max: 30mS(DC), 75mS (AC)
+ Fast: 60mS (DC), 150mS (AC)
+ Medium: 120mS (DC), 450mS (AC)
2.750
USD
+ Slow : 500mS (DC), 600mS (AC)
- LCD Display: 320*240 dot-matrix display
- Correction:
+ Zero OPEN / SHORT: Eliminates measurement error due to
stray parasitc impendances in the test fixtures
- Comparator Fuction
+ High/Pass/Low For each primary measurement parameter
and secondary measurement parameter
- Other Functions:
+ Save/Recall: 64 Multi-step files can be saed/recalled from
the internal nonvolatile memory
+ Continous Memory Capability: If the instrument is turned
off, or if a power failure occurs, instrument setting are
automatically memorized
+ Interface: RS-232, GPIB, Handler (option)
Power Requirement: 90~132Vac or 198~264Vac(selectable)
Size: 100x340x330mm
Weight: 6.5kgs
Include: BNC Kelvin Clips F423501
Microtest 6370 LCR Meter
(20kHz)
Manufacturer: Microtest
Made in Taiwan
Model: 6370
- Measurement Parameters
+ ｜Z｜ R X: 0.01 mΩ ~ 100.00MΩ
+ ｜Y｜ G B: 0.0001nS ~ 1000S
+ Cs Cp: 0.01pF ~ 1F
+ Ls Lp: 0.01uH ~ 100KH
+ D: 0.0001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ DCR: 0.01mΩ ~ 100.00MΩ
+ Δ%: -999.99% ~ 999.99%
+ Θ: -180° ~ +180°
- Measurement Speed
+ Fast: 5 measurements per second
+ Medium: 3 measurements per second
+ Slow: 2 measurements per second
- Basic Accuracy: 0.1%
+ Comparator Test Model: Upper and Lower test limits in
units and percentage
+ Test Frequency: 100Hz~20KHz in 372 steps
+ AC Test Voltage: 50mV 100mV 250mV 500mV 1V
+ DC Test Voltage: 0.5V
- Bias Voltage: 2V
- Ranging: Auto/Hold
- Trigger: Internal, Manual, External, and Bus
- LCD Display: 240x64 dot-matrix display
- Indicator: PASS, FAIL and BIAS LED indictors internal
speaker
- Connections: 4-Terminal BNC Guarded Connections
- Memory: 127 instrument set-up conditions can be saved
- Interface: RS-232port, Handler Interface, GPIB (option)
- Input Voltag 90-132Vac or 198-264Vac(selectable)
1.750
USD
- Dimension: 100x340x330mm
- Weight: 5kg
Include: - BNC Kelvin Clips ( F423501)
Microtest 6371 LCR Meter
(100kHz)
Microtest 6372 LCR Meter
(200kHz)
Manufacturer: Microtest
Made in Taiwan
Model: 6371
- Measurement Parameters
+ ｜Z｜ R X: 0.01 mΩ ~ 100.00MΩ
+ ｜Y｜ G B: 0.0001nS ~ 1000S
+ Cs Cp: 0.01pF ~ 1F
+ Ls Lp: 0.01uH ~ 100KH
+ D: 0.0001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ DCR: 0.01mΩ ~ 100.00MΩ
+ Δ%: -999.99% ~ 999.99%
+ Θ: -180° ~ +180°
- Measurement Speed
+ Fast: 5 measurements per second
+ Medium: 3 measurements per second
+ Slow: 2 measurements per second
- Basic Accuracy: 0.1%
+ Comparator Test Model: Upper and Lower test limits in
units and percentage
+ Test Frequency: 100Hz~100KHz in 372 steps
+ AC Test Voltage: 50mV 100mV 250mV 500mV 1V
+ DC Test Voltage: 0.5V
- Bias Voltage: 2V
- Ranging: Auto/Hold
- Trigger: Internal, Manual, External, and Bus
- LCD Display: 240x64 dot-matrix display
- Indicator: PASS, FAIL and BIAS LED indictors internal
speaker
- Connections: 4-Terminal BNC Guarded Connections
- Memory: 127 instrument set-up conditions can be saved
- Interface: RS-232port, Handler Interface, GPIB (option)
- Input Voltag 90-132Vac or 198-264Vac(selectable)
- Dimension: 100x340x330mm
- Weight: 5kg
Include: - BNC Kelvin Clips ( F423501)
2.250
USD
Manufacturer: Microtest
Made in Taiwan
Model: 6372
- Measurement Parameters
+ ｜Z｜ R X: 0.01 mΩ ~ 100.00MΩ
+ ｜Y｜ G B: 0.0001nS ~ 1000S
+ Cs Cp: 0.01pF ~ 1F
+ Ls Lp: 0.01uH ~ 100KH
+ D: 0.0001 ~ 9.9999
+ Q: 0.1 ~ 9999.9
+ DCR: 0.01mΩ ~ 100.00MΩ
+ Δ%: -999.99% ~ 999.99%
2.750
USD
+ Θ: -180° ~ +180°
- Measurement Speed
+ Fast: 5 measurements per second
+ Medium: 3 measurements per second
+ Slow: 2 measurements per second
- Basic Accuracy: 0.1%
+ Comparator Test Model: Upper and Lower test limits in
units and percentage
+ Test Frequency: 100Hz~200KHz in 372 steps
+ AC Test Voltage: 50mV 100mV 250mV 500mV 1V
+ DC Test Voltage: 0.5V
- Bias Voltage: 2V
- Ranging: Auto/Hold
- Trigger: Internal, Manual, External, and Bus
- LCD Display: 240x64 dot-matrix display
- Indicator: PASS, FAIL and BIAS LED indictors internal
speaker
- Connections: 4-Terminal BNC Guarded Connections
- Memory: 127 instrument set-up conditions can be saved
- Interface: RS-232port, Handler Interface, GPIB (option)
- Input Voltag 90-132Vac or 198-264Vac(selectable)
- Dimension: 100x340x330mm
- Weight: 5kg
Include: - BNC Kelvin Clips ( F423501)
Manufacturer: BK Precision - USA
Model: 879B
BK Precision 879B Handheld
- Measurement parameters: L/C/R/Z/D/Q/θ/ESR
LCR Meter with ESR (10K)
- Test conditions: 100 Hz,120 Hz, 1 kHz, 10 kHz
- Impedance (Z): 4 Ω -4000 kΩ
- Capacitance (C): 40 pF - 20 mF
- Inductance (L): 40 μH - 1000 H
- ESR: 1 Ω - 1000Ω
Power: DC 9V Battery ,
Dimensions (LxWxH): 190 × 90 × 41)
Weight: 330 g
Supplied Accessories: Banana to Alligator Test Leads, 9V
Battery , Mini USB Interface Cable, Manual, AC Adapter*
BK Precision 885 High
Accuracy Handheld
LCR/ESR Meters (10khz)
BK Precision 886 High
299
USD
Manufacturer: BK Precision - USA
Model: 885
- Measurement parameters: Z, L, C, DCR, ESR, D, Q, and Ø
- Test conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz,
- Impedance (Z): 0.1 Ω - 20 MΩ
- Capacitance (C): 0.795 pF - 15.91 mF
- Inductance (L): 1.591 µH - 31.83 kH
AC Operation: 110V/220V AC, 60/50Hz
Dimensions (LxWxH): 174 x 86 x 48mm
Weight: 470 g
Supplied Accessories: User manual, SMD probe, rechargeable
battery, shorting bar, and AC adapter*
595
USD
Manufacturer: BK Precision - USA
Model: 886
- Measurement parameters: Z, L, C, DCR, ESR, D, Q, and Ø
835
USD
Accuracy Handheld
LCR/ESR Meters (100khz)
- Test conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100k
- Impedance (Z): 0.1 Ω - 20 MΩ
- Capacitance (C): 0.159 pF - 15.91 mF
- Inductance (L): 0.159 µH - 31.83 kH
AC Operation: 110V/220V AC, 60/50Hz
Dimensions (LxWxH): 174 x 86 x 48mm
Weight: 470 g
Supplied Accessories: User manual, SMD probe, rechargeable
battery, shorting bar, and AC adapter*
Manufacturer: BK Precision - USA
Model: 889B
BK Precision 889B Bench
- Measurement parameters: Z, L, C, DCR, ESR, D, Q, ACV ,
LCR/ESR Meter with
Component Tester (200Khz) DCV , ACA, DCA and Ø
- Test conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz,
200 kHz,
- Impedance (Z): 0.1 Ω - 20 MΩ
- Capacitance (C): 0.079 pF - 15.91 mF
- Inductance (L): 159.1 µH- 31.83 kH
AC Operation: 110V/220V AC, 60/50Hz
Dimensions (LxWxH): 300 x 220 x 150mm
Weight: 4.5 kg
Supplied Accessories: User manual, Kelvin probe, DMM test
leads, and power cord
1.675
USD
Manufacturer: BK Precision - USA
Model: 878B
BK Precision 878B Handheld
- Measurement parameters: L/C/R/D/Q
LCR Meters (1Khz)
- Test conditions: 120 Hz, 1 kHz
- Impedance (Z): 4 Ω -4000 kΩ
- Capacitance (C): 400 pF - 20 mF
- Inductance (L): 400 μH - 1000 H
Power: DC 9V Battery ,
Dimensions (LxWxH): 190 × 90 × 41
Weight: 330 g
Supplied Accessories: Banana to Alligator Test Leads, 9V
Battery , Mini USB Interface Cable, Manual
249
USD
BK Precision 875B LCR
Meter
ESR BK Precision 881 InCircuit ESR Tester
Manufacturer: BK Precision - USA
Model: 875B
- L: 200uH/2mH/20mH/200mH/2H/20H/200H
- C: 200pF/2nF/20nF/200nF/2uF/20uF/200uF/2mF/ 20mF
- R: 2Ω/20Ω/200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
PowerSingle: 9 V battery
Dimensions: 177 x 88 x 40 mm
Weight: 14 oz (400 grams)
Supplied Accessories: Operation manual and one pair of test
clips (red & black)
Manufacturer: BK Precision - USA
Model: 881
- range of 0.47uF to 2200uF
- Open circuit probe voltage: 15mV pp
- Output test frequency: 100 KHz sine wave
225
USD
210
USD
- Measures ESR: 0.1 – 30 Ω (25 segment LED bar scale)
Beeps from 1 to 5 beeps depending on ESR of capacitor
- Measures DC Resistance: 0.5 – 30 Ω flashing the LED
Power One: 9V battery
Dimensions 1.5" x 3.8" x 5.7"
Manufacturer: BK Precision - USA
Model: 810C
BK Precision 810C Compact
Range:
Capacitance Meter (max
1000 pF / 0.1 pF /1% +10dgt
20mF)
10 nF / 0.001 nF /1% +5dgt
100 nF / 0.01 nF /0.5% + 3dgt
1000 nF / 0.1 nF /0.5% + 3dgt
10 µF / 0.001 µF /0.5% + 3dgt
100µF / 0.01 µF /0.5% + 3dgt
1000µF / 0.1 µF /0.5% + 3dgt
10mF / 0.001 mF /1% + 5dgt
50mF / 0.01 mF 2% + 5dgt
Display: 3 1/2-digit liquid crystal display (LCD)
Power: 9V
Dimension: 171x76x57 mm
Standard Accessories: Alligator clip leads, 9V battery , mini
USB cable, instruction manual
85 USD
Manufacturer: BK Precision - USA
Model: 890C
Range:
1000 pF / 0.1 pF /1% +10dgt
10 nF / 0.001 nF /1% +5dgt
100 nF / 0.01 nF /0.5% + 3dgt
1000 nF / 0.1 nF /0.5% + 3dgt
10 µF / 0.001 µF /0.5% + 3dgt
100µF / 0.01 µF /0.5% + 3dgt
1000µF / 0.1 µF /0.5% + 3dgt
10mF / 0.001 mF /1% + 5dgt
50mF / 0.01 mF 2% + 5dgt
Display: 4 1/2-digit liquid crystal display (LCD)
Power: 9V
Dimension: 190 x 90 x 41 mm
Standard Accessories: Alligator clip leads, 9V battery , mini
USB cable, instruction manual
149
USD
Manufacturer: BK Precision - USA
Model: 830C
Range:
1000 pF / 0.1 pF /1% +10dgt
10 nF / 0.001 nF /1% +5dgt
100 nF / 0.01 nF /0.5% + 3dgt
1000 nF / 0.1 nF /0.5% + 3dgt
10 µF / 0.001 µF /0.5% + 3dgt
100µF / 0.01 µF /0.5% + 3dgt
1000µF / 0.1 µF /0.5% + 3dgt
10mF / 0.001 mF /1% + 5dgt
50mF / 0.01 mF 2% + 5dgt
199.99 mF / 0.01 mF 2% + 5dgt
289
USD
BK Precision 890C Dual
Display Handheld
Capacitance Meters (max
50mF)
BK Precision 830C Dual
Display Handheld
Capacitance Meters (max
200mF)
Display: 3 1/2-digit liquid crystal display (LCD)
Power: 9V
Dimension: 190 x 90 x 41 mm
Standard Accessories: Alligator clip leads, 9V battery , mini
USB cable, instruction manual, AC adapter
Manufacturer: Tenmars
Model: YF-150
Tenmars YF-150 Capacitance Made in: Taiwan
Specification
Meter (200p~20mF)
- Display: 3 1/2 digital with 0.86"(22mm) LCD
- Range: 0.1pF~20mF (20000uF)
- Stalls and accuracy:
200P ± (0.5% rdg +1 dgt +0.5 pF)
2000P/20n/200n/2u/20u/200u ± (0.5% rdg +3 dgt)
20MF ± (2% +1 dgt)
- Accuracy: 0.5% / auto-zero function
- Overload fuse protection
- Compact form factor, with a bracket
- Volume: 143 (L) × 74 (W) × 39 (H) mm
- Warranty: 12 month
Inductance: 20μH, 200μH, 2000.0μH, 20.0000mH, 200.00mH
2000.0H, 20.000H, 200.00H, 2000.0H / ±(0.5%rdg + 5 digits)
LCR Meter Extech LCR200
Capacitance: 20pF, 200pF, 2000pF, 20.000nF, 200.00nF,
2000.0nF, 20.000μF, 200.00μF, 2.0000mF, 20.00mF /
±(0.5%rdg + 5 digits)
Resistance: 20.00Ω, 200.00Ω, 2.0000kΩ, 20.000kΩ,
200.00kΩ, 2.0000MΩ, 20.000MΩ, 200.0MΩ / ±(0.5%rdg + 5
digits)
Test Frequency: 100Hz/120Hz/1kHz/10kHz/100kHz
Dimensions: 7.6 x 3.5 x 1.6” (193 x 88 x 41mm)
Weight: 14.8oz (420g)
Complete with test leads and 9V battery
Manufacturer: Extech - U.S.A
Warranty: 12 months
Manufacturer: Hioki
Model: 3504-40
Hioki 3504-40 LCR METER
Made in: Japan
SPECIFICATIONS
- Measurement parameters: Cs, Cp (capacitance), D (loss
coefficient tan δ)
- Measurement range: Cs, Cp (capacitance), D (loss
coefficient tan δ)
- Basic accuracy:
(typical value) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016
Measurement accuracy = Basic accuracy × B × C × D × E, B
to E is coefficient
- Source frequency: 120Hz, 1kHz
- Measurement signal level:
100mV (3504-60 only), 500mV, 1V rms
Measurement range CV 100mV: up to 170μF range (Source
frequency 1kHz), up to 1.45mF range (Source frequency
120Hz)
40 USD
213
USD
0 USD
Measurement range CV 500mV: up to 170μF range (Source
frequency 1kHz), up to 1.45mF range (Source frequency
120Hz)
Measurement range CV 1V: up to 70μF range (Source
frequency 1kHz), up to 700μF range (Source frequency
120Hz)
- Output resistance: 5Ω
- Display: LED (six digits, full scale count depends on
measurement range)
- Measurement times: 2ms typical (1 kHz, FAST mode)
- Function:
Trigger-synchronous output, Setting configurations can be
stored, Comparator, Averaging, Low-C reject (bad contact
detection), Chatter detection, EXT. I/O, RS-232C (all models
standard)
- Power supply: Selectable 100, 120, 220 or 240V AC ±10%,
50/60Hz, 110VA max.
- Dimensions, mass: 260mm(10.24in)W × 100mm(3.94in)H ×
220mm(8.66in)D, 3.8kg(134.0oz)
- Supplied accessories: Power cord(1), Fuse(1)
- The warranty period: 12 month
Manufacturer: Hioki
Model: 3504-50
Hioki 3504-50 LCR METER
Made in: Japan
SPECIFICATIONS
- Measurement parameters: Cs, Cp (capacitance), D (loss
coefficient tan δ)
- Measurement range: Cs, Cp (capacitance), D (loss
coefficient tan δ)
- Basic accuracy:
(typical value) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016
Measurement accuracy = Basic accuracy × B × C × D × E, B
to E is coefficient
- Source frequency: 120Hz, 1kHz
- Measurement signal level:
100mV (3504-60 only), 500mV, 1V rms
Measurement range CV 100mV: up to 170μF range (Source
frequency 1kHz), up to 1.45mF range (Source frequency
120Hz)
Measurement range CV 500mV: up to 170μF range (Source
frequency 1kHz), up to 1.45mF range (Source frequency
120Hz)
Measurement range CV 1V: up to 70μF range (Source
frequency 1kHz), up to 700μF range (Source frequency
120Hz)
- Output resistance: 5Ω
- Display: LED (six digits, full scale count depends on
measurement range)
- Measurement times: 2ms typical (1 kHz, FAST mode)
- Function:
BIN (measurement values can be classified by rank) (3504-
0 USD
50, 3504-60), Trigger-synchronous output, Setting
configurations can be stored, Comparator, Averaging, Low-C
reject (bad contact detection), Chatter detection, EXT. I/O,
RS-232C (all models standard)
- Power supply: Selectable 100, 120, 220 or 240V AC ±10%,
50/60Hz, 110VA max.
- Dimensions, mass: 260mm(10.24in)W × 100mm(3.94in)H ×
220mm(8.66in)D, 3.8kg(134.0oz)
- Supplied accessories: Power cord(1), Fuse(1)
- The warranty period: 12 month
Manufacturer: Hioki
Model: 3504-60
Hioki 3504-60 LCR METER
Made in: Japan
SPECIFICATIONS
- Measurement parameters: Cs, Cp (capacitance), D (loss
coefficient tan δ)
- Measurement range: Cs, Cp (capacitance), D (loss
coefficient tan δ)
- Basic accuracy:
(typical value) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016
Measurement accuracy = Basic accuracy × B × C × D × E, B
to E is coefficient
- Source frequency: 120Hz, 1kHz
- Measurement signal level:
100mV (3504-60 only), 500mV, 1V rms
Measurement range CV 100mV: up to 170μF range (Source
frequency 1kHz), up to 1.45mF range (Source frequency
120Hz)
Measurement range CV 500mV: up to 170μF range (Source
frequency 1kHz), up to 1.45mF range (Source frequency
120Hz)
Measurement range CV 1V: up to 70μF range (Source
frequency 1kHz), up to 700μF range (Source frequency
120Hz)
- Output resistance: 5Ω
- Display: LED (six digits, full scale count depends on
measurement range)
- Measurement times: 2ms typical (1 kHz, FAST mode)
- Function:
4-terminal contact check function (3504-60 only)BIN
(measurement values can be classified by rank) (3504-50,
3504-60), Trigger-synchronous output, Setting configurations
can be stored, Comparator, Averaging, Low-C reject (bad
contact detection), Chatter detection, EXT. I/O, RS-232C (all
models standard), GP-IB (3504-50, 3504-60)
- Power supply: Selectable 100, 120, 220 or 240V AC ±10%,
50/60Hz, 110VA max.
- Dimensions, mass: 260mm(10.24in)W × 100mm(3.94in)H ×
220mm(8.66in)D, 3.8kg(134.0oz)
- Supplied accessories: Power cord(1), Fuse(1)
- The warranty period: 12 month
0 USD
Manufacturer: Hioki
Model: 3511-50
Hioki 3511-50 LCR METER
Made in: Japan
0 USD
SPECIFICATIONS
- Measurement parameters:|Z|, phase angle, C, L, D, Q, R
- Measurement method:
Source: constant voltage 50 mV to 1 V rms (AC)
Sense: voltage, AC
- Source frequency: 120 Hz or 1 kHz
- Measurement range:
|Z|, R: 10 m-Ohm to 200.00 m-ohm (depending on
condition), phase angle: -90.00 to +90.00 °, C: 0.940 pF to
999.99 mF, L: 1.600 µH to 200.00 kH, D: 0.0001 to 1.9900,
Q: 0.85 to 999.99
- Displayable range:
Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp :
± (0.000000 [unit] to 9.999999G [unit])
Real value display for Z and Y only
θ: ± (0.000° to 999.999°), D: ± (0.000000 to 9.999999)
Q: ± (0.00 to 99999.99), Δ%: ± (0.0000% to 999.9999%)
- Basic accuracy: |Z|: ±0.08 % rdg. , phase angle: ±0.05 °
- Measurement time:
Fast: 5 msec. to Slow: 300 msec. (at 1 kHz)
Fast: 13 msec. to Slow: 400 msec. (at 120 Hz)
- Display: 99999 full digits, LED
- Function: Setting: Upper and lower limit, absolute value,
Output: 3 levels (Hi, In, Lo), Open-collector, Isolated
- External printer: 9442 (use with the 9443-02 or -03/9444)
- Power supply: 100 to 240 V AC (selectable type), 50/60Hz
- Dimensions, mass: 210 mm(8.27 in)W × 100 mm(3.94 in)H
× 168 mm(6.61 in)D, 2.5 kg (88.2 oz)
- Supplied accessories: Power cord(1), Fuse(1)
- The warranty period: 12 month
Manufacturer: Hioki
Model: IM3532
Hioki IM3523 LCR METER
Made in: Japan
SPECIFICATIONS
- Measurement modes: LCR, Continuous testing
- Measurement parameters:Z, Y, θ, Rs (ESR), Rp, DCR (DC
resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q
- Measurement range: 100mΩ to 100MΩ, 10 ranges (All
parameters defined in terms of Z )
- Displayable range:
Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp :
± (0.000000 [unit] to 9.999999G [unit])
Real value display for Z and Y only
θ: ± (0.000° to 999.999°), D: ± (0.000000 to 9.999999)
Q: ± (0.00 to 99999.99), Δ%: ± (0.0000% to 999.9999%)
- Basic accuracy: Z : ±0.05%rdg. θ: ±0.03°
- Measurement frequency: 40Hz to 200kHz (1mHz to 10Hz
steps)
0 USD
- Measurement signal level:
Normal mode
V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps
- Output impedance: 100 Ω
- Display: Monochrome LCD
- Measurement time: 2 ms (1 kHz, FAST, representative
value)
- Function: Comparator, BIM measurement, panel loading/
saving, memory function
- Interface: EXT I/O, USB communiction, Optional: Choose
RS-232C or GP-IB or LAN
- Power supply: 100 to 240 VAC, 50/60 Hz, 50 VA max
- Dimensions, mass: 260 mm (10.24 in) W × 88 mm (3.46 in)
H × 203 mm (7.99 in) D, 2.4 kg (84.7 oz)
- Supplied accessories: Power cord ×1, Instruction Manual ×1,
CD-R (Includes PC commands and sample software) ×1
- The warranty period: 12 month
0 USD
CHEMICAL IMPEDANCE
ANALYZER Hioki IM3590
Manufecturer: Hioki
Model: IM3590
Made in: Japan
SPECIFICTIONS
- Measurement modes:
+ LCR mode, Continuous measurement mode (LCR mode /
Analyzer mode)
+ Analyzer mode (Sweeps with measurement frequency and
measurement level
+ Temperature characteristics, equivalent circuit analysis)
- Measurement parameters:
+ Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance)
+ X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q, T, σ (conductivity)
+ ε (dielectric constant)
- Measurement range:
+ 100 mΩ to 100 MΩ, 10 ranges
- Display range:
+ Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp, σ, ε :
±(0.000000 [unit] to 9.999999G [unit], Absolute value display
for Z and Y only
+ θ : ±(0.000° to 999.999°), D : ±(0.000000 to 9.999999)
+ Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%)
+ T : -10.0°C to 99.9°C
- Basic accuracy: Z : ±0.05%rdg. θ: ±0.03°
- Measurement frequency: 1 mHz to 200 kHz (1 mHz to 10
Hz steps)
- Measurement signal level:
+ Normal mode:
_ V mode/CV mode: 5 mV to 5 Vrms, 1 mVrms steps
_ CC mode: 10 μA to 50 mArms, 10 μArms steps
+ Low impedance high accuracy mode:
_ V mode/CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
_ CC mode:10 μA to 100 mArms, 10 μArms steps
- Output impedance:
+ Normal mode: 100 Ω
+ Low impedance high accuracy mode: 25 Ω
- Display: 5.7-inch color TFT, display can be set to ON/OFF
- Measurement time: 2 ms (1 kHz, FAST, display OFF,
representative value)
- Functions:
+ DC bias measurement, DC resistance temperature
compensation (converted reference temperature is displayed)
+ Temperature measurement, Battery mesurement
(Automatic DC biasing system)
+ Comparator, BIN measurement (classification), Panel
loading/saving, Memory function
- Interface: EXT I/O (Handler), USB communication (highspeed), USB memory Optional: Choose 1 from RS-232C, GPIB, or LAN
- Power supply: 100 to 240 V AC, 50/60 Hz, 50 VA max.
- Dimensions, mass: 330 mm (12.99 in) W × 119 mm (4.69 in)
H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
- Supplied accessories: Power cord ×1, Instruction Manual
×1, CD-R (Communication Instruction Manual and Sample
Software [Communications Control, Accuracy Calculation,
and Screen Capture Functionality] ) ×1
- The warranty period: 12 month
0 USD
CHEMICAL IMPEDANCE
ANALYZER Hioki IM3570
Manufecturer: Hioki
Model: IM3570
Made in: Japan
SPECIFICTIONS
- Measurement modes:
+ LCR mode
+ Analyzer mode (Sweeps with measurement frequency and
measurement level)
+ Continuous measurement mode
- Measurement parameters:
+ Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance)
+ X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q, T, σ (conductivity)
+ ε (dielectric constant)
- Measurement range:
+ 100 mΩ to 100 MΩ, 12 ranges
- Display range:
+ Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp, σ, ε :
±(0.000000 [unit] to 9.999999G [unit], Absolute value display
for Z and Y only
+ θ : ±(0.000° to 999.999°), D : ±(0.000000 to 9.999999)
+ Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%)
+ T : -10.0°C to 99.9°C
- Basic accuracy: Z : ±0.08%rdg. θ: ±0.05°
- Measurement frequency: 4 Hz to 5 MHz (10 mHz to 100 Hz
steps)
- Measurement signal level:
+ Normal mode:
_ V mode/CV mode: 5 mV to 5 Vrms (up to 1 MHz)
_ 10 mV to 1 Vrms (1.0001 MHz to 5 MHz), 1 mVrms
steps
_ CC mode: 10 μA to 50 mArms (up to 1 MHz)
_ 10 μA to 10 mArms (1.0001 MHz to 5 MHz), 10 μArms
steps
+ Low impedance high accuracy mode:
_ V mode/CV mode: 5 mV to 1 Vrms (up to 100 kHz), 1
mVrms steps
_ CC mode:10 μA to 100 mArms (100 mΩ and 1Ω ranges
of up to 100 kHz), 10 μArms steps
- Output impedance:
+ Normal mode: 100 Ω
+ Low impedance high accuracy mode: 10 Ω
- Display: 5.7-inch color TFT, display can be set to ON/OFF
- Measurement time: 0.5 ms (100 kHz, FAST, display OFF,
representative value)
- Functions:
+ DC bias measurement, Comparator, BIN measurement
(classification)
+ Panel loading/saving, Memory function
- Interface: EXT I/O (Handler), USB communication, USB
memory, LAN
- Power supply: 90 to 264 V AC, 50/60 Hz, 150 VA max.
- Dimensions, mass:
330 mm (12.99 in) W × 119 mm (4.69
in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz)
- Supplied accessories: Power cord ×1, Instruction Manual
×1, PC communication Instruction Manual (CD-R) ×1
- The warranty period: 12 month
Manufecturer: Hioki
Model: IM3535
Hioki 3535 CHEMICAL
Made in: Japan
IMPEDANCE ANALYZER
SPECIFICTIONS
- Measurement Items: |Z|, |Y|, Q, Rp, Rs(ESR), G, X, B, Θ,
Ls, Lp, Cs, Cp, D(tan δ)
- Measurement ranges:
Z, R
100mΩ to 2kΩ 1kΩ to 20kΩ
10kΩ
to300kΩ
C
0.66pF to 15.9µF 0.066pF to
1.59nF 4.4fF to 159pF
L
0.133nH to 3.18mH 1.33µH to
31.8mH
13.3µH to 477mH
Θ
-180.00° to 180.00°
- Measurement frequency: 100 kHz to 120 MHz
- Basic accuracy:|Z|: ±0.5 % rdg. , phase angle: ±0.
- Output impedance: 50 ±10 ohm (at 100 kHz)
- Measurement signal level:
+ 5 mV to 1 V, 20 mA max. ( up to 10.00 MHz )
0 USD
+ 5 mV to 500 mV, 10 mA max. ( above 10.01 MHz )
+ Setting Resolution: 1mV steps
+ 200 µA to 20 mA: 1 V max. ( up to 10.00 MHz )
+ 200 µA to 10 mA: 0.5 V max. (above 10.01 MHz)
+ Setting Resolution: 10 µA steps steps
- Measurement Time: 6 ± 1 ms (nominal)
- Functions:
Monitor Function, Limit Function, Average Trigger
Function
Load Compensation Function, Key Lock Function,
Comparator,
Classification ( BIN ) Measurement, Correlation,
Compensation Function, Panel Save and Load,
Measurement Value Storage
Zoom Display Function, Continuous Measurements,
Audible Beeper
Numerical Display, Digit Setting Function, Display Setting
Functions, Printer Function
- Interface: GP-IB, RS-232C and EXT I/O ( standard )
- Power supply: 100 to 240 VAC, 50/60 Hz, 50 VA
- Dimensions, mass: Approx. 360W×130H×360D mm, 8.3 kg
- Supplied accessories: Power cord
- The warranty period: 12 month
Hioki IM3533 CHEMICAL
IMPEDANCE ANALYZER
Manufecturer: Hioki
Model: IM3533
Made in: Japan
SPECIFICTIONS
- Measurement Modes: LCR, Transformer testing (N, M, ΔL),
Continuous testing (LCR mode)
- Measurement Parameters: Z, Y, θ, Rs (ESR), Rp, DCR (DC
resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q, N, M, ΔL,
T
- Measurement Range: 100 kHz to 120 MHz
- Basic accuracy: Z : ±0.05%rdg. θ: ±0.03°
- Output impedance: 100 Ω, Low impedance high accuracy
mode: 25 Ω
- Measurement signal level:
+[Normal mode]
_ V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps
_ CC mode: 10 μA to 50 mArms, 10 μArms steps
+[Low impedance high accuracy mode]
_ V mode, CV mode: 5 mV to 2.5 Vrms, 1 mVrms step
_ CC mode: 10 μA to 100 mArms, 10 μArms steps
- Measurement Time: 2 ms (1 kHz, FAST, display OFF,
representative value)
- Functions:
DC bias measurement, DC resistance temperature
compensation
(converted reference temperature display), Comparator, BIN
measurement (classify function), Panel loading/saving,
Memory function
0 USD
- Interface: EXT I/O (Handler), USB communication (highspeed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
- Power supply: 100 to 240 VAC, 50/60 Hz, 50 VA
- Dimensions, mass: 330 mm (12.99 in) W × 119 mm (4.69 in)
H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
- Supplied accessories: Power cord ×1, Instruction Manual
×1, CD-R (Includes PC commands and sample software) ×1
- The warranty period: 12 month
0 USD
CHEMICAL IMPEDANCE
ANALYZER Hioki 3532-50
Manufecturer: Hioki
Model: 3532-50
Made in: Japan
SPECIFICTIONS
- Measurement Parameters: |Z|,|Y|, θ, Rp, Rs(ESR), G, X, B,
Cp, Cs, Lp, Ls, D(tan δ), Q
- Measurement Range: 100 mΩ to 100 MΩ, 10 ranges (All
parameters defined by |Z|)
- Basic accuracy: |Z|: ±0.08% rdg., θ: ±0.05°
- Extent of Measurement Impedance:
|Z|, R, X: 10.00 mΩ to 200.00 MΩ (depending on condition)
θ: -180.00° to +180.00°, C: 0.3200 pF to 370.00 mF, L:
16.000 nH to 750.00 kH, D: 0.00001 to 9.99999, Q: 0.01 to
999.99, |Y|, G, B: 5.0000 nS to 99.999 S (Note: All
measurement ranges except for |Z| are for reference only)
- Output resistance: 50 Ω
- Source frequency: 42Hz to 5MHz (0.1Hz to 1kHz steps)
- Measurement signal level:
10mV to 5V rms (up to 1MHz), 50mV to 1V rms (1MHz to
5MHz), (1mV rms steps) 10μA to 100mA rms (up to 1MHz),
50μA to 20mA rms (1MHz to 5MHz), (10μA rms steps)
- Measurement Time:
FAST: 5ms, NORMAL: 21ms,
SLOW 1: 72ms, SLOW 2: 140 ms (typical values for
displaying |Z|)
- Functions:
Comparator, External input/Output (EXT. I/O), GP-IB or
RS-232C interface (option)
(Note: RS-232C interface required if used with the Printer
9442.)
- Display: LCD with backlight display, 99999 (3, 4, or 5 digits
unit setting possible)
- Power supply: Selectable 100, 120, 220 or 240V AC ±10%,
50/60Hz, 50VA max.
- Dimensions, mass: 352mm (13.86in) W × 124mm (4.88in) H
× 323mm (12.72in) D, 6.5kg (229.3oz)
- Supplied accessories: Power cord × 1, Spare fuse × 1
- The warranty period: 12 month
0 USD
Resistance meter Hioki
RM3544-01
Manufacturer: Hioki
Model: RM3544-01
Made in: Japan
Specifications
- Resistance range:
+ 30mΩ(max 35mΩ/resolution 1μΩ)
+ 3MΩ (max 3.5MΩ/resolution 100Ω)
- Accuracy: ±0.020 % rdg. ±0.007 % f.s.
- Testing current:
+ With range 30mΩ: 300mA DC
+ With range 3MΩ: 500nA DC
- Open-teminal voltage: 5.5V DC max
- Temperature measurement:
+ -10.0 to 99.9°C
+ Accuracy: ±0.50°C
+ Temperature Z2001
- Measurement:
+ Fast: 50Hz: 21ms, 60Hz: 18ms
+ Medium: 101ms
+ Slow: 401ms
- Function:
+ Temperature correction, comparator(ABS/REF%)
+ Display digit count selection function 4 digits, 5 digits
+ Auto hold, avẻaging
- Communication interface:
+ RS-232C, printer (RS232C), USB
+ Communication monitor function, output data function
- Power supply:
+ 100 to 240 V AC, 50/60 Hz
+ rate power consumption: 15VA
- Dimensions: 215x80x166mm
- mass: 1kg
- Supplied Accessories:
+ Power cord x1, Clip type lead L2101 ×1,Male EXT I/O
connector ×1
+ Intruction manual, Application disc x1, Cable USB x1,
fulse x1
- The warranty period: 12 month
Manufacturer: Hioki
Model: 3541
Resistance HiTESTER Hioki
Made in: Japan
3541
Specification
- Resistance range:
+ 20mΩ(Max.20mΩ)/resolution
0.1μΩ~100MΩ(max.110MΩ)/resolution 1kΩ
+ 2Ω(max.2Ω)/resolution 10μΩ~2kΩ(max.2kΩ)/ resolution
10mΩ
0 USD
- Measurement accuracy:
+ 2kΩ/20kΩ là ±0.007 % rdg. ±0.0015 % f.s
+ 2Ω/2kΩ là ±0.011 % rdg. ±0.01 % f.s
- Testing current:
+ 100nA là 1A DC
+ Low Power ON: 10μΩ là 10mA DC
- Open-terminal voltage: 5V DC 20/200mΩ), 2.6V DC
(2~20kΩ), 13V DC(1M~100MΩ)
- Sampling rate: FAST, MEDIUM, SLOW, 3 settings
- Measurement times:
+ Fast: 0.6ms ± 0.3ms 50/60Hz
+ Medium: 21ms ± 1ms/50Hz, 17ms ± 1ms/ 60Hz
+ Slow1: 155ms ± 5ms/50Hz, 149ms ± 5ms/60Hz
+ Slow2: 455ms ± 10ms/50Hz, 449ms ± 10ms/60Hz
- Other functions: BCD, Temperature measurement (-10.0 to
99.9°C), Comparator , Delay, OVC (offset voltage
compensation), Measurement fault detection, Probe shortcircuit detection, Improve contact, Auto-memory, Statistical
calculations, Settings monitor , Trigger function
- Interface: RS-232C, Printer, GP-IB (Model RM3542-01)
- External I/O: Trigger, Hold input, Comparator output,
Settings monitor terminal
- Power supply, consumption: 100 to 240 V AC, 50/60 Hz, 30
VA max.
- Dimensions, mass:
215 mm (8.46 in) W × 80 mm (3.15
in) H × 295 mm (11.61 in) D, 2.6 kg (91.7 oz)
- Supplied accessories: CLIP TYPE LEAD 9287-10 × 1,
TEMPERATURE PROBE 9451 × 1, Power cord × 1, EXT
I/O Male connector × 1, Operation manual × 1
- The warrnty preiod: 12 month
0 USD
Resistance HiTESTER Hioki
RM3542
Manufacturer: Hioki
Model: RM3542
Made in: Japan
Specification
- Resistance range:
+ 100 mΩ(Max.120mΩ, 0.1μΩ resolution)) to
100MΩ(Max.120MΩ, 100Ω resolution), 10 steps
+ 1000mΩ(Max.1200mΩ, 1μΩ resolution) to
1000Ω(Max.1200Ω, 1mΩ resolution), 4 steps
- Display:Monochrome graphic LCD 240 × 64 dot, white LED
backlight
- Measurement accuracy:
+ 100mΩ ±0.015 % rdg. ±0.002 % f.s.
+ 1000 Ω ±0.006 % rdg. ±0.001 % f.s
- Testing current:
+ 100mΩ range: 100mA DC
+ 100MΩ range: 100 nA DC
- Open-terminal voltage: 20 V DC max.
- Sampling rate: FAST, MEDIUM, SLOW, 3 settings
- Measurement times:
+ 100 Ω /1000 Ω ranges: FAST: 0.9 ms, MED: 3.6 ms,
SLOW: 17 ms (minimum time)
- Integration time: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz,
1 to 6 PLC at 60 Hz
- Other functions: Comparator , Delay, OVC (offset voltage
compensation), Measurement fault detection, Probe shortcircuit detection, Improve contact, Auto-memory, Statistical
calculations, Settings monitor , Trigger function
- Interface: RS-232C, Printer, GP-IB (Model RM3542-01)
- External I/O: Trigger, Hold input, Comparator output,
Settings monitor terminal
- Power supply, consumption: 100 to 240 V AC, 50/60 Hz, 30
VA max.
- Dimensions, mass: 260 mm (10.24 in) W × 88 mm (3.46
in) H × 300 mm (11.81 in) D, 2.9 kg (102.3 oz)
- Supplied accessories: Power cord × 1, EXT I/O male
connector × 1, Operation manual × 1, Operation guide × 1
- The warrnty preiod: 12 month
0 USD
Resistance HiTESTER
RM3543(10mΩ~1000Ω)
Manufacturer: Hioki
Model: RM3543
Made in: Japan
Specification
Measurement method: Four-terminal, constant-current DC
Resistance range: 10 mΩ ~ 1000 Ω/1 mΩ resolution), 7 steps
Display: Monochrome graphic LCD 240 × 64 dot, white LED
backlight
Measurement accuracy: [at 10 mΩ range, with SLOW mode,
average 16 times settings] ±0.060 % rdg. ±0.001 % f.s.
Testing current:[at 10 mΩ range] 1 A DC to [at 1000 Ω range]
1 mA DC
Open-terminal voltage: 20 V DC max
Sampling rate: FAST, MEDIUM, SLOW, 3 settings
Integration time:[at 10 mΩ range, default value] FAST 2.0 ms,
MED 5.0 ms, SLOW 1 PLC,
Setting range: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to
6 PLC at 60 Hz
Note: PLC = one power line cycle (mains wave-form period)
Other functions:Comparator, Delay, OVC (offset voltage
compensation), Average, Measurement fault detection, Probe
short-circuit detection, Improve contact, Current mode setting
(A pulse application function that applies current only during
measurement), Auto-memory, Statistical calculations, Settings
monitor (when using two instruments, a difference in settings
causes warning notification), Retry, Trigger function. etc,.
Interface: External I/O, RS-232C, Printer, GP-IB (Model
RM3543-01)
External I/O: Trigger, Hold input, Comparator output, Settings
monitor terminal, Service power output +5V, +12V, etc.
Power supply, consumption: 100 to 240 V AC, 50/60 Hz, 40
VA max.
Dimensions, mass: 260 mm (10.24 in) W × 88 mm (3.46 in) H
× 300 mm (11.81 in) D, 3.0 kg (105.8 oz)
Supplied accessories: Power cord ×1, EXT I/O male connector
×1, Operation manual ×1, Operation guide ×1
Warrancy: 12 month
Resistance meter Hioki
RM3544
Manufacturer: Hioki
Model: RM3544
Made in: Japan
0 USD
Specifications
- Resistance range:
+ 30mΩ(max 35mΩ/resolution 1μΩ)
+ 3MΩ (max 3.5MΩ/resolution 100Ω)
- Accuracy: ±0.020 % rdg. ±0.007 % f.s.
- Testing current:
+ With range 30mΩ: 300mA DC
+ With range 3MΩ: 500nA DC
- Open-teminal voltage: 5.5V DC max
- Temperature measurement:
+ -10.0 to 99.9°C
+ Accuracy: ±0.50°C
+ Temperature Z2001
- Measurement:
+ Fast: 50Hz: 21ms, 60Hz: 18ms
+ Medium: 101ms
+ Slow: 401ms
- Function:
+ Temperature correction, comparator(ABS/REF%)
+ Display digit count selection function 4 digits, 5 digits
+ Auto hold, avẻaging
- Communication interface:
+ printer (RS232C), USB
+ Communication monitor function, output data function
- Power supply:
+ 100 to 240 V AC, 50/60 Hz
+ rate power consumption: 15VA
- Dimensions: 215x80x166mm
- mass: 0.9kg
- Supplied Accessories:
+ Power cord x1, Clip type lead L2101 ×1
+ Intruction manual, fulse x1
- The warranty period: 12 month
Test frequency: 100 Hz, 120 Hz, 1kHz
Measurements: Z/L/C/R/D/Q/θ/ESR
KEYSIGHT U1731C LCR
Resistance: 2 Ω, 20 Ω, 200 Ω, 2000 Ω, 20 kΩ, 200 kΩ, 2000
meter (100Hz, 120Hz, 1kHz)
kΩ, 2000 kΩ, 20 MΩ, 200 MΩ
Accuracy: 0.2-0.7%
Capacitance: 2000 pF, 0.1 pF, 20 nF, 200 nF, 2000 nF, 20 μF,
200 μF, 2000 μF, 20 mF
0 USD
Accuracy: 0.2-0.5%
Inductance: 2000 μH, 20 mH, 200 mH, 2000 mH, 20 H, 200
H, 2000 H
Accuracy: 0.2-1%
Phase Angle of Impedance: –180o ~180 o
Impedance Zx: 1999.9 Ω, 199.9 Ω, 19.9 Ω, 1.9 Ω
Quality Factor Z, L, C: 0.001~999
Conect to PC by IR-to-USB cable (option)
Power supply: Single standard 9 V battery (alkaline or carbonzinc) or optional power adaptor
Dimensions (H x W x D): 184 mm x 87 mm x 41 mm
include: Quick Start Guide, Certificate of Calibration (CoC),
Alligator clip leads, 9 V alkaline battery
Manufacturer: KEYSIGHT - USA
Capacitance Decade Box
Extech 380405 (100pF ~
11,111µF)
Resistance Decade Box
Extech 380400
(1~11,111,110Ω/0.3W)
Durable construction
Case may be grounded separately
3 binding posts permit isolated substitutions
5% Capacitance substitution from 100pF to 11, 111µF
Excellent for circuit development
Manufaturer: Extech USA
1% Resistance substitution from 1 to 11,111,110 Ω
Seven Decade Ranges of Resistance
Values can be set in 1 increments
0.3W resistors
0.3 internal zero resistance
Manufaturer: Extech USA
Measuring capacitor
1000.0 pF /0.1 pF /1%
KEYSIGHT U1701B
10.000 nF /0.001 nF /1%
Handheld Capacitance Meter
100.00 nF /0.01 nF /0.5%
1000.0 nF /0.1 nF /0.5%
10.000 μF /0.001μF /0.5%
100.00 μF /0.01 μF /0.5%
1000.0 μF /0.1 μF /0.5%
10.000 mF /0.001 mF /1%
199.99 mF/ 0.01 mF /2%
Record and store the value of Min / Max / Average
Data connected to a computer via USB cable-to-RI (Option)
Power supply: 9 V Alkaline battery or option AC power
adapter and cord
Dimensions (H x W x D): 184 mm x 87 mm x 41 mm
includes: Quick Start Guide, Certificate of Calibration (CoC),
Alligator clip leads, 9 V alkaline battery
Manufacturer: KEYSIGHT- USA
LCR Meter Extech 380193
Inductance: 2000.0μH, 20.000mH, 200.00mH, 2000.0mH,
20.000H, 200.00H, 2000.0H, 10000H / ±(0.7%rdg +
Lx/10000 + 5 digit)
Capacitance: 2000.0pF, 20.000nF, 200.00nF, 2000.0nF,
20.000μF, 200.00μF, 2000.0μF, 10.000mF/ ±(0.7%rdg + 5
digit)
0 USD
89 USD
3.780.0
00 USD
180
USD
Resistance: 20.000Ω, 200.00Ω, 2.0000kΩ, 20.000kΩ,
200.00kΩ, 2.0000MΩ, 10.000MΩ / ±(0.5%rdg + 8 digit)
Test Frequency 120Hz and 1kHz
Dimensions 7.56 x 3.58 x 2.1” (19.2 x 9.1 x 5.25cm)
Weight 12.87oz (365g)
Manufacturer: Extech - U.S.A
Warranty: 12 months
0 USD
LCR HiTESTER Hioki 353250
Manufacturer: Hioki
Model: 3532-50
Origin: Japan
Warraty: 12 months
Measurement parameters: |Z|,|Y|, θ, Rp, Rs(ESR), G, X, B,
Cp, Cs, Lp, Ls, D(tan δ), Q
Measurement ranges 100 mΩ to 100 MΩ, 10 ranges (All
parameters defined by |Z|)
Extent of Measurement Impedance :|Z|, R, X: 10.00 mΩ to
200.00 MΩ (depending on condition)
θ: -180.00° to +180.00°, C: 0.3200 pF to 370.00 mF, L:
16.000 nH to 750.00 kH, D: 0.00001 to 9.99999, Q: 0.01 to
999.99, |Y|, G, B: 5.0000 nS to 99.999 S (Note: All
measurement ranges except for |Z| are for reference only)
Basic accuracy :|Z|: ±0.08% rdg., θ: ±0.05°
Source frequency :42Hz to 5MHz (0.1Hz to 1kHz steps)
Measurement signal level :10mV to 5V rms (up to 1MHz),
50mV to 1V rms (1MHz to 5MHz), (1mV rms steps) 10μA to
100mA rms (up to 1MHz), 50μA to 20mA rms (1MHz to
5MHz), (10μA rms steps)
Output resistance :50Ω
Display :LCD with backlight display, 99999 (3, 4, or 5 digits
unit setting possible)
Measurement times :FAST: 5ms, NORMAL: 21ms,
SLOW 1: 72ms, SLOW 2: 140 ms (typical values for
displaying |Z|)
DC bias :Superimposed DC voltage, DC current to source
signal (used with the optional DC bias unit and constant
voltage or current source equipment)
Function :Comparator, External input/Output (EXT. I/O), GPIB or RS-232C interface (option)
(Note: RS-232C interface required if used with the Printer
9442.)
Power consumption :Selectable 100, 120, 220 or 240V AC
±10%, 50/60Hz, 50VA max.
Dimensions, mass :352mm (13.86in) W × 124mm (4.88in) H
× 323mm (12.72in) D, 6.5kg (229.3oz)
Supplied accessories :Power cord × 1, Spare fuse × 1
Bench Type LCR Meter
Dual LCD Display.
Capacitance, Resistance, Impedance, Inductance, Quality Factor,
Dissipation Factor Phase Angle.
Auto Detect Function.
640
USD
Pintek LCR-900 ( LCR
Meter, 100KHz, USB )
Open Circuit/Short Circuit Compassion.
Operation Frequency 100Hz to 100KHz.
Basic Accuracy: 0.3%
Measurement Voltage Fixed at 0.6Vrms.
Reamrk:
- The above-mentioned price Excluded VAT invoice.
- The picture is not completely the same as real product
Delivery:
- Inside Hanoi downtown after 2 to 6 hours in working time for product available in stock, except for products need to be
made
- Products for provincial delivery depend on the delivery time from nearest wearhouse to delivery place.
Payment mode:
* In cash or bank remittance
Further information
EMIN Vietnam Joint Stock Company
Office in Ha Noi City:
Add : No 8A, Hoang Cau Street, Dong Da Distric, Ha Noi, Vietnam
Tel : (04) 35.381.269 - ( 04) 35.381.271
Fax : (04) 35 190 360;
Email: [email protected]
Office in Ho Chi Minh City:
Add : No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City
Tel : (08) 3811 96 36 - (08) 3811 93 59
Fax : (08) 3811 95 45 ; Email: [email protected]