Download Habitat 1 Specifications

Habitat 1 Specifications
Type:
Sealed, two front-firing active woofers, one back-firing passive woofer
Drive Unit:
Two 6.5 in., 165 mm long-throw, steel chassis
Passive Unit:
10 in, steel chassis
Lower Frequency Response:
30Hz at -6dB in room
Input Connectors:
High-Level Neutrik Speakon
Low-Level single phono
LFE single phono
Input Impedance
High-Level:
Low-Level:
.1/LFE:
150k
10k
10k ohms
Gain Control Range:
80dB
Power Output:
150 Watts (RMS)
Phase Switch:
Yes, 0 or 180 degrees
Amplifier Type:
Class D
Protection System
Fully Electronic
SET-SAFE:
D.C. Fault:
Output Short:
Yes
Yes
Yes
Mains Input Voltage:
100-240V
Fuse:
1.6A for 230V operation
3.16A for 120V operation
Power Consumption:
16.3 Watts for 120V operation
19 Watts for 230V operation
When mains switch is turned off, unit draws no power
Dimensions (WHD):
25 x 16 x 4.5 in., (635 x 406 x 114 mm)
Net Weight:
50lbs. (23kg)
Finish:
Gloss Piano Black or Gloss White Lacquer
Supplied Accessories
Mains Lead:
Yes
Neutrik Speakon Interconnect:
Yes (2 meter cable intended for use with Longbow™ transmitter)
User Manual:
Yes
Longbow™ Transmitter
Input Connectors:
High-Level Neutrik Speakon
Low-Level single phono
LFE single phono
Input Impedance:
High-Level:
Low Level:
.1/LFE:
150k
10k
10k ohms
Wireless Output Power:
11dBm
Wireless Effective Distance:
50 ft (15.2 meters) with clear line of site
30 ft (9.1 meters) with single stud wall between transmitter and receiver
Mains Input Voltage:
9V DC, 5.5 mm circular connector, positive center
Power Consumption:
600 mW
Dimensions (WHD):
6 x 2 x 6.5 in., (152.4 x 50.8 x 165 mm)
Finish:
Gloss Piano Black or Gloss White Lacquer
Supplied Accessories
Power Adaptor:
Yes
In the interest of product improvement, REL Acoustics Limited reserves the right to alter these
specifications without notice.