Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Variable, flexible, easy to configure Press release PI 1936 Page 1 of 2 New output module for the JUMO mTRON T automation system With its universal input/output modules and its flexible connection technology as well as comprehensive communication, evaluation, and automation software, the modular JUMO mTRON T measurement, control and automation system can be used in a wide variety of industries. JUMO mTRON T is a variable system that is constantly expanded based on customer requirements. The latest development is a four-channel analog output module. The new output module for the JUMO mTRON T system includes four universal analog outputs for current or voltage. These can be flexibly configured to 0 to 10 V / 2 to 10 V / 0 to 20 mA / 4 to 20 mA signals. Special highlights include galvanic separation of the channels and separate adjustment options for each output. For example, this enables the configuration of one output at 0 to 10 V and three outputs at 4 to 20 mA. Output fault behavior is also freely definable and configurable. The easy-to-use software and the multifunction panel can both be used to adjust the system. The current I/O modules have been expanded to include the fourchannel analog output module so that an even greater scope of functionality can be guaranteed. Configurability and flexible adjustment of parameters are of primary focus for all modules. No programming skills are necessary here since these adjustments can be made through a setup program that includes integrated hardware recognition. In connection with the JUMO mTRON T HMI 840 (type 705060) multifunction panel, a number of parameters within the overall JUMO mTRON T system can also be selected and modified using preconfigured control screens. This allows one to quickly react in service and maintenance cases. Editorial information: Michael Brosig, Press Office Phone: +49 661 6003-238 Fax: +49 661 6003-881238 Email: [email protected] Technical information: Andre Berning, Product Manager Phone: +49 661 524 67094904 Email: [email protected] JUMO GmbH & Co. KG Moritz-Juchheim-Str. 1 36039 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-500 Email: [email protected] Internet: www.jumo.net Press release Page 2 of 2 Photo: JUMO Caption: The new four-channel analog output module for the JUMO mTRON T system stands out with its high degree of flexibility and easy operation The JUMO corporate group, with headquarters in Fulda, employs over 2,200 associates worldwide and is one of the leading manufacturers in the area of industrial sensor and automation technology. The innovative product spectrum includes the entire measurement chain from the sensor to the automation solution for the measurement parameters temperature, pressure, liquid analysis, flow, level, and humidity. The corporate group encompasses five branches in Germany, 24 subsidiaries abroad, and more than 40 agencies around the world. Sales in 2013 were 218 million euro.