Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Datasheet LUMO Series High Density Fiber Converters Space-saving, modular platform for advanced signal processing. LUMO from Grass Valley, a Belden Brand, is a high-density 1 RU frame with 36 SFP-based fiber converters, ideal for large distribution of high bandwidth 3G signals. LUMO’s 1 RU size minimizes rack space and often complex cabling concerns have been greatly reduced by including fiber connectivity on one side of the unit and coax electrical on the other. Reliability and serviceability is further secured through the use of hot swappable cards and a redundant PSU, as well as remote system health monitoring and alarming for all key components, including optical signal strength. Custom LUMO fiber management trays integrate three Multifiber Push On (MPO) adapters to our LUMO series high density fiber converters. Each MPO adapter accommodates a 12-fiber MPO connection (LC breakout not included). The LUMOBNC-MPO, which is the 1 RU BNC housing frame with MPO bracket, and the LUMO-DIN-MPO, which is a the 1 RU DIN housing frame with MPO bracket, will both provide the same functionality as existing LUMO models for large distribution of high bandwidth 3G signals with up to 36 SFP-based fiber converters in a high-density 1 RU chassis. LUMO-BNC LUMO-BNC-MPO Note: LC Breakout not included. www.grassvalley.com 1 LUMO Series High Density Fiber Converters KEY FEATURES • • • • • • • High-density 1 RU frame with 36 SFP-based fiber converters Supports 2x18 CWDM wavelengths Modular, hot swappable SFPs and cards for efficient serviceability Mechanical design with fiber connectivity on one side and coax on the other for ease of cabling Redundant, hot swappable built-in power supplies Remote system health monitoring and alarming for all key components Convenient fiber cable management bracket FIO-911-4T-LC 3G/HD/SD SDI IN A Optical Tx FIBER Tx A 3G/HD/SD SDI IN B Optical Tx FIBER Tx B 3G/HD/SD SDI IN C Optical Tx FIBER Tx C 3G/HD/SD SDI IN D Optical Tx FIBER Tx D FIO-911-4T-S13-LC 3G/HD/SD SDI IN A 3G/HD/SD SDI OUT A 3G/HD/SD SDI IN B 3G/HD/SD SDI OUT B 3G/HD/SD SDI IN C 3G/HD/SD SDI OUT C 3G/HD/SD SDI IN D 3G/HD/SD SDI OUT D Up to 9 cards FIO-911-4R-LC Optical Tx FIBER Tx A Optical Tx FIBER Tx B Optical Tx FIBER Tx C Optical Tx FIBER Tx D Up to 9 cards FIO-911-4R-LC FIBER Rx A Optical Rx 3G/HD/SD SDI OUT A FIBER Rx A Optical Rx FIBER Rx B Optical Rx 3G/HD/SD SDI OUT B FIBER Rx B Optical Rx FIBER Rx C Optical Rx 3G/HD/SD SDI OUT C FIBER Rx C Optical Rx FIBER Rx D Optical Rx 3G/HD/SD SDI OUT D FIBER Rx D Optical Rx LUMO-CPU-ETH Ethernet 10/100 Controler Ethernet 10/100 LUMO-PSU-AC LUMO-PSU-AC Power supply AC IN Power supply AC IN LUMO-PSU-AC LUMO-PSU-AC AC IN 3G/HD/SD SDI OUT C1 3G/HD/SD SDI OUT C2 3G/HD/SD SDI OUT D1 3G/HD/SD SDI OUT D2 LUMO-CPU-ETH Ethernet 10/100 Controler Ethernet 10/100 3G/HD/SD SDI OUT A1 3G/HD/SD SDI OUT A2 3G/HD/SD SDI OUT B1 3G/HD/SD SDI OUT B2 AC IN Power supply LUMO-BNC Functional Block Diagram Power supply LUMO-DIN Functional Block Diagram SPECIFICATIONS Electrical Inputs Connector: BNC (36) or DIN (72) Signal: 3G/HD/SD SDI, SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259-C compliant Supports data rates of 270, 1483.5, 1485, 2967, 2970 Mb/s EN50 83-9 DVB-ASI 270 Mb/s Cable length: 3G: 100m (328 ft.) HD: 160m (524 ft.) SD: 350m (1,148 ft.) Return loss: >15 dB up to 1.5 GHz, >10 dB up to 3 GHz Electrical Outputs Connector: BNC (36) or DIN (72) Signal: 3G/HD/SD SDI, SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259-C compliant Supports data rates of 270, 1483.5, 1485, 2967, 2970 Mb/s EN50 83-9 DVB-ASI 270 Mb/s Jitter (wideband): 3G: <0.3 UI HD/SD: <0.2 UI Rise/fall time: 3G/HD: 135 ps max 20 to 80% SD: 400-800 ps 20 to 80% Return loss: >15 dB up to 1.5 GHz, >10 dB up to 3 GHz Optical I/O Connectors: • Video SFP compliant (non-msa) • MPO adapter (3) Optical: SMPTE ST 297-2006 compliant Connector type: LC/PC Fiber type: Single-mode (SMF) Rx Channel Sensitivity: 270 Mb/s, 1.5 Gb/s and 3 Gb/s: -21 dB Tx Channel (1310 nm) Transmit power: -5 dBm to 0 dBm Laser type: Fabry-Perot Tx Channel (CWDM) Transmit power: 0 dBm to +4 dBm www.grassvalley.com Laser type: DFB (distributed feedback) Processing Performance Signal path: 10 bits Latency: <6 ns Communication Connector: RJ45 Compliant to: 10BaseT/100BaseTx Power Rating: 160W max. Input range: AC 96-264V, 50-60 Hz Cooling Fan: One on frame, removable Operating temp. range: 0 to 40° C (32 to 104° F) 2 LUMO Series High Density Fiber Converters Building-to-building connectivity over fiber CWDM-MUX CWDM-DEMUX CWDM single fiber link Broadcast core distribution over fiber Technical room Graphics Post-production Playout Studio ORDERING Frame LUMO-BNC LUMO-BNC-MPO LUMO-DIN LUMO-DIN-MPO LUMO-PSU-AC LUMO-CPU-ETH 1 RU BNC housing frame with 1 power supply 1 RU BNC housing frame with MPO bracket and 1 power supply* 1 RU DIN housing frame with 1 power supply 1 RU DIN housing frame with MPO bracket and 1 power supply* Optional redundant PSU (AC) Optional LUMO frame controller Cards (maximum 9 per frame) FIO-911-4T-S13-LC Quad 3G/HD/SD optical transmitter 1310 nm LC/PC connectors FIO-911-4R-LC Quad 3G/HD/SD optical receiver LC/PC connectors FIO-911-4TH-CwwCxxCyyCzz-LCHigh power Quad 3G/HD/SD optical CWDM Tx, LC/PC connector (see CWDM wavelength information table below) Choose one code from this listing For CwwCxx and CyyCzz Wavelength (nm) Note C27C29 1271/1291 C31C33 1311/1331 C35C37 1351/1371 C39C41 1391/1411The 1391/1411 transmitters require the use of low water peak SMF as per ITU-T G-652C/D standard C43C45 1431/1451 C47C49 1471/1491 C51C53 1511/1531 C55C57 1551/1571 C59C61 1591/1611 Example 1 FIO-911-4TH-C27C29C31C33-LC High power Quad 3G/HD/SD optical CWDM transmitter 1271/1291 nm and 1311/1331 nm, LC/PC connector Example 2 FIO-911-4TH-C43C45C47C49-LC High power Quad 3G/HD/SD optical CWDM transmitter 1431/1451 nm and 1471/1491 nm, LC/PC connector Notes: All receiver channels (R) are wideband, responding to wavelengths ranging from 1260 to 1620 nm, compatible with 1310 nm and CWDM wavelengths. *LC Breakout not included. GVB-1-0244D-EN-DS WWW.GRASSVALLEY.COM Join the Conversation at GrassValleyLive on Facebook, Twitter, YouTube and Grass Valley - A Belden Brand on LinkedIn. Belden, Belden Sending All The Right Signals and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Grass Valley is trademark or registered trademark of Grass Valley. Belden Inc., Grass Valley and other parties may also have trademark rights in other terms used herein. Copyright © 2014, 2016 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. 3