Download School of Engineering And Applied Sciences

School of Engineering and Applied Sciences
Department of Electrical and Computer Engineering
ECE-002, Spring 2009
Lab Schedule – TOMP RM301
GTA: Qianyi Zhao
Lab 1: Sensor Characterization
- Introduction to Digital Sensors
- Review of Analog Sensors
- Analog Sensor Characterization
Lab 2: Maze Project 1
- Review of IC
- Programming for the maze project
- Building your robot
Lab 3: Maze Project 2
- ECE001 Project preparation.
- Fine tuning the built robot, such that it is ready for the final robot
demonstration.
- Make sure robot meets specifications required in project.
Lab 4: Maze Project Demonstration.
- Successfully run your robot through the given maze, such that it is able
to find its way out, without any external help.
Lab 5: Elevator Project (Go to RM309)
- Building your elevator with legos.
- Programming for your elevator
Lab 6: Elevator Project Demonstration (Go to RM309)
- Finishing the elevator project
- Demonstrating your elevator in your class
Lab 7: Introduction to the Oscilloscope
- Learn how to use an Oscilloscope to measure D.C. (Direct Current)
Voltage and A.C. (Alternating Current) Voltage
Lab 8: DC Circuits Lab
- Constructing a series circuit
- Measuring the D.C. voltage in the series circuit
- Using Matlab to solve simple mesh circuit problems
Lab 9: PSPICE Experiment
- Learn how to use PSPICE to simulate a simple circuit
Lab 10: Circuits Quiz & MATLAB Exercises
- Quiz on basic circuit theory during lecture
- MATLAB exercises during lab
Lab 11: Final Presentation
- Each group is required to give a previously prepared power-point
presentation.
Presentation should be a summary of work completed during this
semester in ECE2