Download HMC543LC4B - uri=media.digikey

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC543LC4B
v05.0514
PHASE SHIFTERS - DIGITAL - SMT
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
Typical Applications
Features
The HMC543LC4B is ideal for:
Low RMS Phase Error: 5°
• EW Receivers
Low Insertion Loss: 6.5 dB
• Weather & Military Radar
Excellent Flatness
• Satellite Communications
360° Coverage, LSB = 22.5°
• Beamforming Modules
24 Lead Ceramic SMT Package: 16mm2
Functional Diagram
General Description
The HMC543LC4B is a 4-bit digital phase shifter
which is rated from 8 to 12 GHz, providing 0 to 360
degrees of phase coverage, with a LSB of 22.5
degrees. The HMC543LC4B features very low
RMS phase error of 5 degrees and extremely low
insertion loss variation of ±0.8 dB across all phase
states. This high accuracy phase shifter is controlled
with complementary logic of 0/-3V, and requires no
fixed bias voltage. The HMC543LC4B is housed in
a compact 4x4 mm ceramic leadless SMT package
and is internally matched to 50 Ohms with no external
components. Simple external level shifting circuitry
can be used to convert a positive CMOS control
voltage into complementary negative control signals.
Electrical Specifications, TA = +25° C, 50 Ohm System, Control Voltage = 0/-3V
Parameter
Frequency Range
Min.
Typ.
8
Insertion Loss*
6.5
Input Return Loss*
10
Output Return Loss*
10
Phase Error*
±10
RMS Phase Error
Gain Variation*
Input Power for 1 dB Compression
21
Max.
Units
12
GHz
8
dB
dB
dB
±15
deg
5
deg
±0.8
dB
24.5
dBm
Input Third Order Intercept
40
dBm
Control Voltage Current
0.4
µA
*Note: All States Shown
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC543LC4B
v05.0514
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
Insertion Loss, All States
Normalized Loss, All States
0
3
NORMALIZED LOSS (dB)
INSERTION LOSS (dB)
-2
-4
-6
-8
-10
2
1
0
-1
-2
-3
-12
-4
8
9
10
11
12
8
9
FREQUENCY (GHz)
Input Return Loss, All States
12
11
12
20
15
PHASE ERROR (degrees)
-5
RETURN LOSS (dB)
11
Phase Error, All States
0
-10
-15
-20
-25
10
5
0
-5
-10
-15
-30
-20
8
9
10
11
12
8
9
FREQUENCY (GHz)
10
FREQUENCY (GHz)
Output Return Loss, All States
Relative Phase Shift, All States
0
RELATIVE PHASE SHIFT (degrees)
400
-5
RETURN LOSS (dB)
10
FREQUENCY (GHz)
PHASE SHIFTERS - DIGITAL - SMT
4
-10
-15
-20
-25
-30
350
300
250
200
150
100
50
0
8
9
10
FREQUENCY (GHz)
11
12
8
9
10
11
12
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
2
HMC543LC4B
v05.0514
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
20
55
15
50
MAX
10
45
IP3 (dBm)
RELATIVE PHASE SHIFT (degrees)
Input IP3, All States
RMS
5
AVERAGE
0
40
35
-5
30
-10
25
8
9
10
11
12
8
9
FREQUENCY (GHz)
30
90
28
P1dB (dBm)
100
80
70
12
11
12
26
24
22
60
20
8
9
10
11
8
12
9
RMS Phase Error vs. Temperature
Insertion Temperature All States
0
15
-2
INSERTION LOSS (dB)
20
10
5
0
+25C
+85C
-40C
-5
10
FREQUENCY (GHz)
FREQUENCY (GHz)
RELATIVE PHASE SHIFT (degrees)
11
Input P1dB, All States
50
-4
-6
-8
-10
-10
-12
8
9
10
FREQUENCY (GHz)
3
10
FREQUENCY (GHz)
Input IP2, All States
IP2 (dBm)
PHASE SHIFTERS - DIGITAL - SMT
Relative Phase Shift,
RMS, Average, Max, All States
11
12
8
9
10
11
12
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC543LC4B
v05.0514
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
Phase Error vs. State
PHASE ERROR (degrees)
15
8 GHz
10
State
Bias Condition
Low (0)
-2.5 to -3.5V @ 0.4 µA Typ.
High (1)
0 to +0.3V @ 0.4 µA Typ.
5
0
-5
Absolute Maximum Ratings
-10
9,10,11 & 12 GHz
-15
-20
0
50
100
150
200
250
300
350
STATE (degrees)
Input Power (RFin) (8-12 GHz)
+27 dBm (T= +85 °C)
Channel Temperature (Tc)
150 °C
Thermal Resistance
(channel to ground paddle)
130 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Truth Table
Control Voltage Input
Bit 1
Bit 1
Bit 2
Bit 2
Bit 3
Bit 3
Bit 4
Bit 4
Phase Shift (Degree)
RFIN - RFOUT
0
1
0
0
0
1
1
0
1
1
1
0
0
0
1
0
0
1
1
1
0
1
1
0
0
0
0
1
0
1
1
1
1
0
1
0
0
0
0
0
1
1
1
1
1
1
0
0
Reference
22.5
45.0
90.0
180.0
337.5
PHASE SHIFTERS - DIGITAL - SMT
Control Voltage
20
Any combination of the above states will provide a phase shift approximately equal to the sum of the bits selected.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
HMC543LC4B
v05.0514
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
PHASE SHIFTERS - DIGITAL - SMT
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER
50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND..
Package Information
Part Number
Package Body Material
Lead Finish
HMC543LC4B
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H543
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC543LC4B
v05.0514
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
Pin Descriptions
Function
Description
1, 2, 17 - 24
N/C
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
3, 5, 14, 16
GND
These pins and exposed ground paddle
must be connected to RF/DC ground.
4
RFIN
This port is matched to 50 Ohms.
BIT3, BIT1,
Non-Inverted Control Input. See truth table
and control voltage tables.
6, 9, 11, 13
7, 8, 10, 12
15
BIT2, BIT4
BIT3, BIT1
BIT2, BIT4
Inverted Control Input. See truth table
and control voltage tables.
RFOUT
This port is matched to 50 Ohms.
Interface Schematic
Application Circuit
This circuit converts a single line positive (0/+5V) control signal to complementary negative (0/-3V) control signals.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
PHASE SHIFTERS - DIGITAL - SMT
Pin Number
6
HMC543LC4B
v05.0514
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
PHASE SHIFTERS - DIGITAL - SMT
Evaluation PCB
List of Materials for Evaluation PCB 116255 [1][3]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J4
Molex Header 2mm
U1
HMC543LC4B 4-Bit Digital Phase Shifter
PCB [2]
116253 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Please refer to part’s pin description and functional diagram for
pin out assignments on evaluation board.
7
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC543LC4B
v05.0514
PHASE SHIFTERS - DIGITAL - SMT
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8