Download Chapter 12 - Buckeye Valley

Document related concepts

Internal energy wikipedia , lookup

Eigenstate thermalization hypothesis wikipedia , lookup

Transcript
How to Use This Presentation
• To View the presentation as a slideshow with effects
select “View” on the menu bar and click on “Slide Show.”
• To advance through the presentation, click the right-arrow
key or the space bar.
• From the resources slide, click on any resource to see a
presentation for that resource.
• From the Chapter menu screen click on any lesson to go
directly to that lesson’s presentation.
• You may exit the slide show at any time by pressing
the Esc key.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Resources
Chapter Presentation
Transparencies
Bellringers
Standardized Test Prep
Visual Concepts
Math Skills
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Work and Energy
Table of Contents
Section 1 Work, Power, and Machines
Section 2 Simple Machines
Section 3 What is Energy?
Section 4 Conservation of Energy
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Objectives
• Define work and power.
• Calculate the work done on an object and the rate at
which work is done.
• Use the concept of mechanical advantage to explain
how machines make doing work easier.
• Calculate the mechanical advantage of various
machines.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Bellringer
In your study of motion, you have learned that forces
can cause motion. But in some cases, a force that is
applied is balanced by another opposite force, and
there is no net motion as a result. Look at the following
illustrations, and identify the forces and motion in each
one. (See illustrations on following slide.)
1. In one drawing, no motion is likely to occur. Which
drawing is it?
2. Describe the forces that are acting in this diagram. If
the person exerts slightly more force, what happens to
the opposite force? Does it increase to match the new
force of the person, stay the same, or decrease?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Bellringer, continued
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
What is Work?
• Work is the transfer of energy to a body by the
application of a force that causes the body to move in
the direction of the force.
• Work is done only when a force causes an object to
move in the direction of the force. This is different
from the everyday meaning of work.
• Work Equation
work = force  distance
W=Fd
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Work
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
What is Work?, continued
• Work is measured in joules.
• Because work is calculated as force times
distance, it is measured in units of newtons times
meters, N•m.
• These units are also called joules (J). In terms of
SI base units, a joule is equivalent to 1 kg•m2/s2.
• Definition of joules
1 J = 1 N•m = 1 kg•m2/s2
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Math Skills
Work Imagine a father playing with his daughter by
lifting her repeatedly in the air. How much work does
he do with each lift, assuming he lifts her 2.0 m and
exerts an average force of 190 N?
1. List the given and unknown values.
Given:
Unknown:
force, F = 190 N
distance, d = 2.0 m
work, W = ? J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Math Skills, continued
2. Write the equation for work.
work = force  distance
W=f d
3. Insert the known values into the equation, and
solve.
W = 190 N  2.0 m = 380 N•m
W = 380 J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Power
• Power is a quantity that measures the rate at which
work is done or energy is transformed.
• Power Equation
work
power 
time
W
P
t
• Power is measured in watts.
• A watt (W) is equal to a joule per second (1 J/s).
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Power
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Math Skills
Power It takes 100 kJ of work to lift an elevator 18 m. If
this is done in 20 s, what is the average power of the
elevator during the process?
1. List the given and unknown values.
Given:
work, W = 100 kJ = 1  105 J
time, t = 20 s
The distance of 18 m will not be needed to
calculate power.
Unknown: power, P = ? W
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Math Skills, continued
2. Write the equation for power.
work
power 
time
W
P
t
3. Insert the known values into the equation, and
solve.
1 105 J
P
 5  103 J/s
20 s
P  5  103 W  5 kW
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Machines and Mechanical Advantage
• Machines multiply and redirect forces.
• Machines help people by redistributing the work
put into them.
• They can change either the size or the direction of
the input force.
• Different forces can do the same amount of work.
• A machine allows the same amount of work to be
done by either decreasing the distance while
increasing the force or by decreasing the force
while increasing the distance.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Force and Work
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Machines and Mechanical Advantage, continued
• Mechanical advantage tells how much a machine
multiplies force or increases distance.
• Mechanical Advantage Equation
output force input distance
mechanical advantage 

input force output distance
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Math Skills
Mechanical Advantage Calculate the mechanical
advantage of a ramp that is 5.0 m long and 1.5 m
high.
1. List the given and unknown values.
Given:
input distance = 5.0 m
output distance = 1.5 m
Unknown:
mechanical advantage = ?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 1 Work, Power, and
Machines
Math Skills, continued
2. Write the equation for mechanical advantage.
Because the information we are given involves
only distance, we only need part of the full
equation:
input distance
mechanical advantage 
output distance
3. Insert the known values into the equation, and
solve.
5.0 m
mechanical advantage 
 3.3
1.5 m
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Objectives
• Name and describe the six types of simple machines.
• Discuss the mechanical advantage of different types
of simple machines.
• Recognize simple machines within compound
machines.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Bellringer
You may not think of a
door as a simple machine,
but it is one. It functions
like a lever. Like other
levers, when you exert a
force on it (an input force),
a force is exerted along
the entire door (the output
force).
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Bellringer, continued
1. For all levers, one point along the lever stays still
while the rest of the lever moves. This point is called the
fulcrum. Where is the fulcrum of a door?
2. You can push at any point along the width of a door
and it will open. Which position requires the least force:
pushing the door near the hinges, in the middle, or near
the side farthest from the hinges? (Hint: Which of these
feels easiest to do?)
3. If you are trying to prop the door open, but your only
doorstop is not very heavy, is it likely to work best near
the hinges, in the middle, or near the side farthest from
the hinges?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
The Lever Family
• The most basic machines are called simple
machines.
• The six types of simple machines are divided into two
families.
The lever family:
The inclined plane family:
• simple lever
• simple inclined plane
• pulley
• wedge
• wheel and axle
• screw
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
The Lever Family, continued
• Levers have a rigid arm and a fulcrum.
• Levers are divided into three classes.
• All first-class levers have a fulcrum located
between the points of application of the input and
output forces.
• In a second-class lever, the fulcrum is at one end
of the arm and the input force is applied to the
other end.
• Third-class levers multiply distance rather than
force. As a result, they have a mechanical
advantage of less than 1.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Levers
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Lever
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
The Lever Family, continued
• Pulleys are modified levers.
• The point in the middle of a pulley is like the
fulcrum of a lever.
• A single, fixed pulley has a mechanical advantage
of 1.
• Multiple pulleys are sometimes put together in a
single unit called a block and tackle.
• A wheel and axle is a lever or pulley connected to a
shaft.
• The steering wheel of a car, screwdrivers, and
cranks are common wheel-and-axel machines.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Pulleys
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Pulley
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
The Inclined Plane Family
• Inclined planes multiply and redirect force.
• An inclined plane turns a small input force into a
large output force by spreading the work out over
a large distance.
• A wedge is a modified inclined plane.
• A screw is an inclined plane wrapped around a
cylinder.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Inclined Plane
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Screws
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 2 Simple Machines
Compound Machines
• A machine made of more than one simple machine is
called a compound machine.
• Examples of compound machines are:
• scissors, which use two first class levers joined at
a common fulcrum
• a car jack, which uses a lever in combination with
a large screw
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Objectives
• Explain the relationship between energy and work.
• Define potential energy and kinetic energy.
• Calculate kinetic energy and gravitational potential
energy.
• Distinguish between mechanical and nonmechanical energy.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Bellringer
In the chapter on matter, you learned that energy is
conserved. Instead of being created or destroyed, it is
just changed from one form to another. The energy of
the sunlight that reaches Earth is the ultimate source of
most of the energy around us. Look at the illustration
below, and identify the types of energy involved.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Bellringer, continued
1. How did energy from sunlight provide the energy the
girl needed to swing the bat? (Hint: What do you need
to have energy?)
2. When the girl hits the ball, she exerts a force on it.
Does she do work on the ball in the scientific sense of
the term? Explain why.
3. After the girl hits the ball, the ball moves very fast and
has energy. When the ball hits the fielder’s glove, it
stops moving. Given that energy can never be
destroyed but merely changes form, what happened to
the energy the ball once had? (Hint: If you are the
fielder, what do you hear and feel as you catch the
ball?)
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Energy and Work
• Energy is the ability to do work.
• When you do work on an object, you transfer
energy to that object.
• Whenever work is done, energy is transformed or
transferred to another system.
• Energy is measured in joules.
• Because energy is a measure of the ability to do
work, energy and work are expressed in the same
units.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Potential Energy
• The energy that an object has because of the
position, shape, or condition of the object is called
potential energy.
• Potential energy is stored energy.
• Elastic potential energy is the energy stored in any
type of stretched or compressed elastic material,
such as a spring or a rubber band.
• Gravitational potential energy is the energy stored
in the gravitational field which exists between any
two or more objects.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Potential Energy
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Potential Energy, continued
• Gravitational potential energy depends on both mass
and height.
• Gravitational Potential Energy Equation
grav. PE = mass  free-fall acceleration  height
PE = mgh
• The height can be relative.
• The height used in the above equation is usually
measured from the ground.
• However, it can be a relative height between two
points, such as between two branches in a tree.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Math Skills
Gravitational Potential Energy A 65 kg rock climber
ascends a cliff. What is the climber’s gravitational
potential energy at a point 35 m above the base of
the cliff?
1. List the given and unknown values.
Given:
mass, m = 65 kg
height, h = 35 m
free-fall acceleration, g = 9.8 m/s2
Unknown: gravitational potential energy, PE = ? J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Math Skills, continued
2. Write the equation for gravitational potential
energy.
PE = mgh
3. Insert the known values into the equation, and
solve.
PE = (65 kg)(9.8 m/s2)(35 m)
PE = 2.2  104 kg•m2/s2
PE = 2.2  104 J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Kinetic Energy
• The energy of a moving object due to the object’s
motion is called kinetic energy.
• Kinetic energy depends on mass and speed.
• Kinetic Energy Equation
1
kinetic energy   mass  speed squared
2
1
KE  mv 2
2
• Kinetic energy depends on speed more than mass.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Kinetic Energy Graph
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Kinetic Energy
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Math Skills
Kinetic Energy What is the kinetic energy of a 44 kg
cheetah running at 31 m/s?
1. List the given and unknown values.
Given:
mass, m = 44 kg
speed, v = 31 m/s
Unknown: kinetic energy, KE = ? J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Math Skills, continued
2. Write the equation for kinetic energy.
1
kinetic energy   mass  speed squared
2
1
KE  mv 2
2
3. Insert the known values into the equation, and
solve.
1
KE  (44 kg)(31 m/s)2
2
KE  2.1 10 4 kggm2 /s2
KE  2.1 10 4 J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Other Forms of Energy
• The amount of work an object can do because of the
object’s kinetic and potential energies is called
mechanical energy.
• Mechanical energy is the sum of the potential energy
and the kinetic energy in a system.
• In addition to mechanical energy, most systems
contain nonmechanical energy.
• Nonmechanical energy does not usually affect
systems on a large scale.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Other Forms of Energy, continued
• Atoms and molecules have kinetic energy.
• The kinetic energy of particles is related to heat
and temperature.
• Chemical reactions involve potential energy.
• The amount of chemical energy associated with a
substance depends in part on the relative
positions of the atoms it contains.
• Living things get energy from the sun.
• Plants use photosynthesis to turn the energy in
sunlight into chemical energy.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 3 What is Energy?
Other Forms of Energy, continued
• The sun gets energy from nuclear reactions.
• The sun is fueled by nuclear fusion reactions in its
core.
• Electricity is a form of energy.
• Electrical energy is derived from the flow of
charged particles, as in a bolt of lightning or in a
wire.
• Light can carry energy across empty space.
• Light energy travels from the sun to Earth across
empty space in the form of electromagnetic
waves.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Objectives
• Identify and describe transformations of energy.
• Explain the law of conservation of energy.
• Discuss where energy goes when it seems to
disappear.
• Analyze the efficiency of machines.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Bellringer
You give yourself and your sled gravitational potential
energy as you pull your sled to the top of a snowy hill.
You get on board your sled and slide to the bottom of
the hill, speeding up as you go.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Bellringer, continued
1. When does the sled have the most potential energy?
When does it have the least potential energy?
2. Where does the sled have the most kinetic energy?
the least kinetic energy?
3. What happens to the relative amounts of potential
and kinetic energy as the sled slides down the hill?
What happens to the total energy?
4. After the sled reaches the bottom of the hill, it coasts
across level ground and eventually stops. What
happened to the energy the sled had?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Energy Transformations
• Energy readily changes from one form to another.
• Potential energy can become kinetic energy.
• As a car goes down a hill on a roller coaster,
potential energy changes to kinetic energy.
• Kinetic energy can become potential energy.
• The kinetic energy a car has at the bottom of a hill
can do work to carry the car up another hill.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Energy Graphs
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Energy Transformations, continued
• Energy transformations explain the flight of a ball.
• Mechanical energy can change to other forms of
energy.
• Mechanical energy can change to nonmechanical
energy as a result of friction, air resistance, or
other means.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Kinetic and Potential Energy Graph
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Energy Conversion in Automobile Engines
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
The Law of Conservation of Energy
• The law of conservation of energy states that energy
cannot be created or destroyed.
• Energy doesn’t appear out of nowhere.
• Whenever the total energy in a system increases,
it must be due to energy that enters the system
from an external source.
• Energy doesn’t disappear, but it can be changed to
another form.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
The Law of Conservation of Energy, continued
• Scientist study energy systems.
• Boundaries define a system.
• Systems may be open or closed.
• When the flow of energy into and out of a system
is small enough that it can be ignored, the system
is called a closed system.
• Most systems are open systems, which exchange
energy with the space that surrounds them.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Conservation of Mechanical Energy
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Efficiency of Machines
• Not all of the work done by a machine is useful work.
• A machine cannot do more work than the work
required to operate the machine.
• Because of friction, the work output of a machine
is always somewhat less than the work input.
• Efficiency is the ratio of useful work out to work in.
• Efficiency is usually expressed as a percentage.
• The efficiency of a machine is a measure of how
much useful work it can do.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Efficiency of Machines, continued
• Efficiency Equation
useful work output
efficiency 
work input
• Perpetual motion machines are impossible.
• Energy is always lost to friction or air resistance.
• Machines need energy input.
• Because energy always leaks out of a system,
every machine needs at least a small amount of
energy input to keep going.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Math Skills
Efficiency A sailor uses a rope and an old, squeaky
pulley to raise a sail that weighs 140 N. He finds that
he must do 180 J of work on the rope in order to raise
the sail by 1 m (doing 140 J of work on the sail).
What is the efficiency of the pulley? Express your
answer as a percentage.
1. List the given and unknown values.
Given:
work input = 180 J
useful work output = 140 J
Unknown: efficiency = ? %
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Math Skills, continued
2. Write the equation for efficiency.
useful work output
efficiency 
work input
3. Insert the known values into the equation, and
solve.
140 J
efficiency 
 0.78
180 J
To express this as a percentage, multiply by 100
and add the percent sign, "%."
efficiency  0.78  100%  78%
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Mechanical Efficiency
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Section 4 Conservation of
Energy
Concept Map
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts
1. What causes the force of acceleration of a Space
Shuttle booster rocket?
A.
B.
C.
D.
exhaust gases pushing against the ground
exhaust gases pushing against the atmosphere
exhaust gases pushing against the rocket itself
exhaust gases pushing against other gas
molecules in the rocket
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
1. What causes the force of acceleration of a Space
Shuttle booster rocket?
A.
B.
C.
D.
exhaust gases pushing against the ground
exhaust gases pushing against the atmosphere
exhaust gases pushing against the rocket itself
exhaust gases pushing against other gas
molecules in the rocket
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
2. Which of the following is true about an object in
orbit?
F.
G.
H.
I.
It is beyond Earth’s gravity.
Its velocity does not change.
It is constantly falling toward Earth.
Its forward acceleration comes from air pressure.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
2. Which of the following is true about an object in
orbit?
F.
G.
H.
I.
It is beyond Earth’s gravity.
Its velocity does not change.
It is constantly falling toward Earth.
Its forward acceleration comes from air pressure.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
3. Which of these statements describes the law of
conservation of energy?
A.
B.
C.
D.
No machine is 100% efficient.
Energy is neither created nor destroyed.
The energy resources of Earth are limited.
The energy of a system is always decreasing.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
3. Which of these statements describes the law of
conservation of energy?
A.
B.
C.
D.
No machine is 100% efficient.
Energy is neither created nor destroyed.
The energy resources of Earth are limited.
The energy of a system is always decreasing.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
4. A coal-burning power plant produces electrical
energy with an efficiency of 30%. If the chemical
energy produced by burning one kilogram of coal is
25,000,000 joules (J), how many joules of electrical
energy are produced by the combustion of one gram
of coal?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Understanding Concepts, continued
4. A coal-burning power plant produces electrical
energy with an efficiency of 30%. If the chemical
energy produced by burning one kilogram of coal is
25,000,000 joules (J), how many joules of electrical
energy are produced by the combustion of one gram
of coal?
Answer: 7500 J
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Reading Skills
When astronauts first landed on the moon, cameras
sent back pictures of them jumping. They were able
to jump much higher than on Earth even though they
were wearing very heavy space suits. Muscles
generate the same amount of force on Earth, on the
moon, or in space.
5. Analyze why the astronauts could jump higher on
the moon without exerting any additional force.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Reading Skills, continued
[See reading passage on previous slide.]
5. Analyze why the astronauts could jump higher on
the moon without exerting any additional force.
Answer: Although the force of gravity is less than on
Earth, the astronauts’ muscles are able to exert the
same force as on Earth.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Interpreting Graphics
6. If the input force on this
pulley system is 100 N,
what is the output
force?
F.
G.
H.
I.
100 N
200 N
300 N
400 N
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Interpreting Graphics, continued
6. If the input force on this
pulley system is 100 N,
what is the output
force?
F.
G.
H.
I.
100 N
200 N
300 N
400 N
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Interpreting Graphics, continued
7. How could the amount of
force required to raise the
bucket be decreased even
more?
A. Add additional pulleys.
B. Increase the length of
the rope.
C. Thread the rope
through the pulleys in
opposite order.
D. Increase the amount
of force on the free
end of the rope.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 12
Standardized Test Prep
Interpreting Graphics, continued
7. How could the amount of
force required to raise the
bucket be decreased even
more?
A. Add additional pulleys.
B. Increase the length of
the rope.
C. Thread the rope
through the pulleys in
opposite order.
D. Increase the amount
of force on the free
end of the rope.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.