Download 100P Series - energie

100P Series
Polycrystalline Silicon Solar Modules
High-efficiency photovoltaic module using silicon nitride coated polycrystalline
silicon cells.
● Solar Cell: High efficiency crystalline solar cell.
Even if under the weak light, the solar module can
produce maximum power output.
● Tempered glass: Anti-reflecting coating and high
transmission rate glass increase the power output
and mechanical strength of solar module.
● EVA and TPT: Using high quality EVA and TPT to
prevent destroying and water.
● AIl frame: With 4 screw, corner connection.
● Junction box: Multi function junction box with water
proof.
● Long lifetime: ≥15 years; Less power decrease.
● Good performance of preventing from atrocious
weather such as wind and hails.
● Resisting moisture and etching effectively, not effect by geology.
Electric Characteristics
B2B2B
Model
Maximum Power(Pmax)
Sp-100W
100
Open circuit voltage (Voc)
23.00
Short circuit current (Isc)
5.60
Voltage at Pmax (Vpm)
17.50
Current at Pmax (Ipm)
5.32
Solar Cell Efficiency (%)
17.0
STC: Irradiance 1000W/m2 , Temperature 25℃, AM=1.5
4B4B4B4B
Temperature Coefficient
NOCT
The temperature coefficient of Isc
The temperature coefficient of Voc
The temperature coefficient of Im
The temperature coefficient of Vm
The temperature coefficient of Pmax
47℃±2℃
+0.05±0.01%/℃
-0.35±0.02%/℃
+0.05±0.01%/℃
-0.35±0.02%/℃
-0.45±0.05%/℃
Qualification Test Parameters
5B5B5B5B
Temperature cycling range
Humidity freeze, damp heat
Static load front and back (e.g. wind)
Front loading (e.g. snow)
Hailstone impact
(52mph)
0B0B
Module Diagram
-40℃~85℃
85%RH
2400 pa (50psf)
5400 pa (113psf)
25mm ( 1 inch) at 23 m/s