Download Appendix B - NI ELVIS Specifications

Appendix B - NI ELVIS Specifications
Analyzers
Capacitance
Oscilloscope
Accuracy
0.02
Two channels
Range
50 pF to 500 µF
Data storage, cursors, auto scaling
Test voltage range
1V p-p
Max input bandwidth
50 kHz*
Continuity
Max sampling rate
500 kHz / channel*
Resistance threshold
Range
±10 V
Inductance
Input resolution
12 or 16 bits
15 Ω max
Accuracy
0.01
Bode Analyzer
Range
100 µH to 100 mH
Frequency and phase plots
Test frequency
950 Hz
Frequency range and step control
Test frequency voltage
1 V p-p
Logarithmic or linear frequency spacing
Source
Data storage, cursors, auto scaling
Function Generator
5 Hz – 35 kHz*
Manual or software control
Input range
±10 V
Sine, triangle, square
waveforms
Frequency sweep
Input resolution
12 or 16 bits
TTL sync pulse out
Frequency range
Dynamic Signal Analyzer
Impedance Analyzer
Measurement frequency range
AM, FM modulation
5 Hz to 35 kHz
Two Wire Current Voltage Analyzer
Frequency range
5 Hz to 250 kHz
Frequency accuracy
0.03
Voltage range
±10 V
Output amplitude
±2.5 V
Current range
±10 mA
Software amplitude resolution
8 bits
Three Wire Current Voltage Analyzer
Offset range
±5 V
NPN BJT transistor only
AM voltage
10 V max
Data storage, cursors, auto scaling
Amplitude modulation
Up to 100%
10 V max
Maximum Collector Voltage
10 V
FM Voltage
Minimum base increment
15 µA
Amplitude flatness
Digital Multimeter
Resistance
To 50 kHz
0.5 dB
To 250 kHz
3 dB
Accuracy
0.01
Range
5 Ω to 3 MΩ
Arbitrary Waveform
Generator
Two channels
Accuracy
0.003
One-shot or continuous
generation
Waveform editor
Range
±20 V
Amplitude
±10 V
Input impedance
1MΩ
Frequency range
DC – 100 kHz *
Output drive current
25 mA max
DC Voltage
AC Voltage
Accuracy
0.003
Output impedance:
1
Range
±14 Vmrs
Slew rate:
1.5V/µs
Current
DC accuracy
0.25% ±3 mA**
AC accuracy
0.25% ±3 mA**
Range
±250 mA
Shunt resistance
0.5 Ω
Maximum common mode voltage
±20 V
Common mode rejection
70 dB
28
Power Supplies
±15 V Supply
Output current
Fused at 500 mA
Ripple and noise
0.01
Line regulation
0.5% max
5 V Supply
Output current
Fused at 2 A
Ripple and noise
0.01
Line regulation
0.5% max
Variable power supplies
0 to +12 V and -12 V
Ripple and noise
0.0025
Software resolution
7 bits
Current limiting
0.5 V at 130 mA, 5 V at
275 mA, 12 V at 450 mA
Digital I/O
Digital input resolution
8 bits
Digital output resolution
8 bits
Digital addressing
4 bits
* Specification depends on Data Acquisition device functionality
** Proper null correction at the common mode voltage can reduce
±3 mA error to 200 µA
Full Data and Spec Sheet for the NI ELVIS System is available at:
http://www.ni.com/pdf/products/us/ni_elvis.pdf
29