Download 127mm (5.0INCH) SEVEN SEGMENT DISPLAY

127mm (5.0INCH) SEVEN SEGMENT DISPLAY
Part Number: SA50-31SYKWA
Super Bright Yellow
Features
Description
z 5.0 inch digit height.
The Super Bright Yellow device is made with AlGaInP (on
z Low current operation.
GaAs substrate) light emitting diode chip.
z Excellent character appearance.
z Easy mounting on P.C. boards or sockets.
z Categorized for luminous intensity.
z Mechanically rugged.
z Standard : gray face,white segment.
z RoHS compliant.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 1 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112
Selection Guide
Part No.
Dice
SA50-31SYKWA
Iv (ucd) [1]
@ 10mA
Lens Type
Super Bright Yellow (AlGaInP)
WHITE DIFFUSED
Min.
Typ.
18000
79500
Description
Common Anode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Super Bright Yellow
590
nm
IF=20mA
Spectral Line Half-width
Super Bright Yellow
20
nm
IF=20mA
C
Capacitance
Super Bright Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Per Segment or (DP and Comma)
Super Bright Yellow
20.0
(6.0)
25.0
(7.5)
V
IF=20mA
IR
Reverse Current
Per Segment or (DP and Comma)
Super Bright Yellow
10
(10)
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
Power dissipation
Per Segment or (DP and Comma)
1500
(225)
mW
DC Forward Current
Per Segment or (DP and Comma)
60
(30)
mA
Peak Forward Current [1]
Per Segment or (DP and Comma)
350
(175)
mA
Reverse Voltage
Per Segment or (DP and Comma)
5
(5)
V
Operating / Storage Temperature
Lead Solder Temperature[2]
-40°C To +85°C
260°C For 3-5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 2 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112
Super Bright Yellow
SA50-31SYKWA
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 3 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 4 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112
PACKING & LABEL SPECIFICATIONS
SA50-31SYKWA
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 5 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 6 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112
SPEC NO: DSAJ6504
REV NO: V.2
DATE: FEB/10/2011
PAGE: 7 OF 7
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: D.M.Su
ERP:1301003112