Download CONTROLLER QUESTIONNAIRE

CONTROLLER QUESTIONNAIRE
VERSION 27.10.2010
Your contact information:
Company:
Name:
Ref.:
Date:
1(2)
Street address:
Email:
Telephone:
Fax:
Controller type (if known):
Installation:
-
cut out hole, diameter
front plate:
Ø mm,
72 x 72 mm
encapsulated, protection level IP
96 x 96 mm
.
other, size:
Handle:
-
handle type (if known):
-
handle length:
110 mm,
-
spring return:
yes,
-
additionals in handle:
change over contact
normally closed contact NC,
normally open contact NO,
NC + NO contacts,
2 × NC contacts,
2 × NO contacts,
mechanical unlock by lifting
140 mm,
no
180 mm,
mechanical interlock:
other length:
yes,
mm.
no.
additional handle control device:
”dead man contact” = push down handle
push button on handle, IP 23
push button on handle, IP 65
push button on handle, sunk
contact by lifting
turn handle
turn handle, returning
other special type, function, … :
Connections:
-
function directions:
1-axis
-
switching steps (e.g. 5-0-5):
steps in view direction:
-0-
,
-
zero-contact:
-
circuit type, if known (pls. see catalogue):
in view direction
circuit type
-
-
steps in cross direction
in cross direction
in view direction:
-0not needed
,
in cross direction:
,
in cross direction:
potentiometer type, if known (pls. see catalogue):
potentiometer
in view direction:
potentiometer data:
resistor:
power:
-
2-axis
     
1 W (gliding contact 1 mA)
50 W (wire wound potentiometer)
2… 3 W (gliding contact 100 mA)
special circuits: attach a circuit diagram, forms in catalogue.
continued on next page »
CONTROLLER QUESTIONNAIRE
VERSION 27.10.2010
Electrical data:
-
voltage:
V
-
current:
A
-
material
:
silver (standard)
AC
DC
gold (30 VDC, 4 mA, for low level signals)
Special functions:
-
gates:
-
special connection:
Other information:
no gate (all directions and middle directions allowed)
cross gate (allows only main directions)
angle gate (limits handle tilt), max. tilt angle:
°
special gate, attach a specification.
CAN-bus, protocol:
CANopen
Profibus DP
analog output, voltage:
V
analog output, current:
mA
HALL-sensor + amplifier, attach a specification
optical absolute encoder + amplifier, attach a specification
2(2)