Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
CREATE 2016 Hosted By: 1st International Conference for the Research on Emerging Applications in Technology & Engineering Technical Co Sponsors: 1st International Conference for the Research on Emerging Applications in Technology & Engineering (25th to 27th February, 2016, Kolkata, India) Hosted by: Techno India College of Technology, Kolkata Host Website: http://tict.edu.in/ Conference Website: http://tict.edu.in/tictcreate/ Paper Submission Link: https://easychair.org/conferences/?conf=create2016 Call for Papers Techno India College of Technology is going to arrange its 1st Technical International Conference CREATE 2016 with the technical co-sponsorship of IEEE Kolkata Section on 25th to 27th February, 2016, in the institution premises. Original unpublished contributions are solicited for presentation at the 1st International Conference for the Research on Emerging Applications in Technology and Engineering, 2016 (CREATE 2016). Papers cannot be submitted in parallel to any other conference or journal. The topics of interest include but are not limited to: Computer Science and Engineering/Information Technology/ Master of Computer Applications 1. Network & Security 2. Artificial Intelligence & its applications 3. Multimedia Technologies and its Applications 4. Human-Computer Interaction 5. Web Intelligence 6. Software Engineering 7. Image Processing & Pattern Analysis Electrical Engineering 1. Power System Operation & Control 2. Control & Automation 3. Special Electrical Machines: Analysis & Design 4. Power Electronics & Drives 5. Contemporary Application of Emerging Technology in Non-conventional Energy. Electronics and Communication Engineering 1. FPGA Design and Reconfigurable Systems 2.Wireless Systems 3.Analog / RF Design 4. Nanoscale Materials and Devices (NMD) 5. Communication and Space Science (CSS) 6. Microwave and Light wave Technology (MLT Applied Electronics and Instrumentation Engineering 1. Electronic Measurement Systems & Industrial Instrumentation 2. Control Engineering & Process Automation 3. Emerging Trends on Biomedical Instrumentation 4. Advancement in MEMS & Embedded Systems 5. Wireless sensor networks & Virtual Instrumentation Mechanical Engineering Civil Engineering 1. Thermal Power Engineering 2. Fluid and Hydraulic System 3. Heat Transfer and CFD system 4. Flexible Manufacturing System 5. Energy Resources and Energy Generation Technique 6. CAD/CAM/CIM 1. Green Buildings and their importance 2. Building materials and their applications 3. Designs of improved road intersections 4. Design of Earthquake Resistant Structures 5. Ground Improvement Techniques Basic Science 1. Intutionistic Fuzzy set with application to decision making problem and social related problem 2. Optimization techniques for Business and Economics 3. Dynamical system and its application in Biology and Agricultural application 4. Fluid Mechanics in engineering and industry 5. Fractional Calculus and its application in engineering 6. Computer simulation study of effect of high energy irradiation on Polymer system 7. Molecular Dynamics on Polymer Paper Submission Guidelines Authors are invited to submit unpublished, original work written in English. Electronic version of the paper must be submitted only in pdf and no other format will be accepted. The papers should be prepared following the IEEE 8.5" x 11" (US Letter Size) two column format and strictly limited to 6 pages (upto 2 extra pages is permitted with extra page charges payable at the time of registration). Avoid plagiarism while preparing the paper. The authors must avoid plagiarism while preparing the camera-ready paper. Simultaneous submission of same paper or submission of published or submitted paper with considerable overlap is strictly prohibited. The detailed information regarding plagiarism may be found here: http://www.ieee.org/publications_standards/publications/rights/plagiarism.html Instructions for the Authors All papers will undergo double-blind review process. Names and Affiliations of the authors must NOT be included anywhere in the paper during the initial submission. For the double-blind review purpose, self-references are NOT allowed. If the author needs to refer his/her own paper the reference MUST be made in third person. Any attempt to reveal author details at the time of initial submission may lead to rejection of the paper without further processing. Authors of accepted papers must guarantee that at least one author registers as early bird at full registration rate and present the paper at the conference. Formatting instructions and Templates for IEEE 8.5" x 11" (US Letter Size) two column format are available from here or from the following URL: http://www.ieee.org/conferences_events/conferences/publishing/templates.html Selected Extended papers will be published in SCOPUS, DBLP and ACM dl in indexed journals. Important dates Last date for Paper Submission : 5th December, 2015 Acceptance Notification : 20th December 2015 Author Registration (Early Bird): 25th December 2015 Author Registration ends : 10th January 2016 Camera ready Copy due : 20th January 2016 Conference presentation submission : 25th January 2016